Stirrers - Hotplate News

The DLAB MS-H280-Pro and MS-H380-Pro magnetic stirrers are reliable laboratory hotplate stirrers designed for precise sample heating and mixing in research, educational and industrial laboratory environments. Combining accurate temperature control with consistent stirring performance, these compact units are ideal for sample preparation, chemical analysis, microbiology and general laboratory workflows.
Built with durable ceramic-coated plates and advanced safety features, the MS-H280-Pro and MS-H380-Pro provide laboratories with dependable day-to-day performance while supporting efficient and reproducible experimental results.

Features & Benefits
- Accurate heating and stirring control - Digital speed and temperature adjustment provides precise control for consistent sample preparation and reproducible laboratory results.
- Durable ceramic-coated work plate - Chemically resistant ceramic surfaces offer excellent durability and easy cleaning, making them suitable for demanding laboratory use.
- High-temperature capability - Supports heating up to approximately 280 °C (MS-H280-Pro) and 380 °C (MS-H380-Pro) for a wide range of laboratory applications.
- Integrated safety monitoring - Residual heat warning indicators and over-temperature protection help improve user safety during operation.
- Compact, space-saving laboratory design - Small footprint and robust construction make these magnetic stirrers ideal for busy laboratory benches and routine daily use.

Introduction
Ohaus Guardian 3000 range of hotplate stirrers from WolfLabs.
The OHAUS Guardian 3000 hotplate stirrers - models e‑G31HS04C‑K1, e‑G31HS07C‑K1 and e‑G31HSRDS‑K1, combine powerful performance, advanced safety, and intuitive digital control—ideal for routine lab heating and mixing tasks.

Features & Benefits
- Digital Control & SafetyHeat™ – Back-lit LCD provides clear temperature and speed display with intuitive icons; SafetyHeat™ system prevents overheating by shutting down early if needed.
- Robust Construction – Spill-resistant metal housing with chemical-resistant ceramic or ceramic-coated stainless-steel plates ensures durability and easy cleaning.
- Wide Temperature & Stirring Range – Heats from ambient +5 °C to 500 °C (380 °C on stainless steel plate) and stirs at 80–1600 rpm, delivering precise control.
- Hot‑Top Indicator & Probe Ready – A clear hot-top warning illuminates when surface exceeds 40 °C, and optional PT1000 probe compatibility achieves accurate sample temperature readings.
- Multiple Plate Sizes – Choose between models with 102×102 mm, 178×178 mm, or 135 mm diameter plates to suit various vessel formats and volumes.

Introduction
Ohaus Guardian 5000 range of hotplate stirrers from Wolflabs.
The Next Generation Guardian 5000 Hotplate Stirrers are engineered for safety and versatility across research, academic and industrial settings. They offer powerful heating and mixing, with premium hardware and software to support diverse users safely and reliably. Heating models reach up to 550 °C and feature 3 temperature control modes for quick heating or precise heating without overshoot. Select from 5 models with 3 plate sizes.

Features and benefits
- An intuitive user interface featuring a large, bright LCD screen
- RS232 port included for remote control or data logging
- The evolved SmartRate system supports heating & stirring from fast and intensive to soft and precise
- SafetyHeat and SmartHeat features combined with the new Run Dry Protection system plus the Time Run mode and the optional Splash Shield provide complete safety
- A wide range of accessories to empower a variety of applications is available

Introduction
DLab MS-H-S and MS-H-Pro hotplate stirrers from Wolflabs.
DLab introduces the MS-H-S and MS-H-Pro hotplate stirrers, combining precise temperature control with powerful stirring capabilities for optimal laboratory performance. Designed with advanced safety features and user-friendly interfaces, these hotplate stirrers are ideal for researchers seeking reliable, consistent heating and mixing in their experimental workflows.

Features and benefits
- Digital speed control up to 1500rpm
- Digital temperature control up to 340°C
- Wide range timer up to 99h 59mins
- Remote function provides PC control and data transmission
- Wide variety of accessories available  

Introduction
Ohaus Guardian 2000 range of hotplate stirrers from Wolflabs.

Features and benefits
- Powerful stirring up to 15 L
- Adjustable speed range of 200 - 1600 rpm
- Reaches temperatures up to 500°C (ceramic top) or 380°C (ceramic coated stainless steel top)
- The rugged metal housing has a spill resistant design for long life in the lab under harsh conditions

A selection of Hotplate Stirrers from Heidolph have been added to the website, these include MR Hei-Standard, MR Hei-Standard Package, MR Hei-Tec, and MR Hei-End.

Jenway Hotplate stirrer added to website. 100071 - Hotplate stirrer Jenway 1000 analogue control to 450°C ceramic top plate 10L capacity supplied with stirrer bar

Offers for Hotplate Stirrers from Stuart. The special offer models are; UC152 + SCT1 + SCT1/1 + SR1, and US152 + SCT1 + SCT1/1 + SR1.

Our best selling hotplate stirrer

US152-Offer - Wolf special offer - Hotplate stirrer Stuart US152 15l capacity, maximum plate temperature 325°C, coated aluminium silicon plate, analogue control, 1 position, plate dimensions 150w x 150d mm OFFER ENDS 24-12-2014

Two new hotplate stirrers from Stuart have been added to the website

We have updated the images and product literature for all Heidolph units on wolflabs.co.uk

To see the updates, click the below link. You can access the product literature by clicking onto the additional information tab.

http://www.wolflabs.co.uk/laboratory-equipment/stirrers-hotplate

Discounts of around 25% here - http://www.wolflabs.co.uk/laboratory-equipment/stirrers-hotplate

New UC152/KIT, US152/KIT, UC152D/KIT and US152D/KIT hotplate stirrer units from Stuart have been added to the website.

New MSH-300i hotplate stirrer from Grant Instruments has been added.

Discounts of almost 35% - http://www.wolflabs.co.uk/laboratory-products/stirrers-hotplate

Introduction
The Stuart US152 series hotplate stirrer from Wolflabs. Stuart hotplate stirrers are available in a choice of ceramic or coated metal tops. These units are also available with a digital display to accurately control the hotplate surface temperature. All surfaces are square to allow more flexibility in vessel sizes and combinations, for example four 250ml beakers can easily be accommodated.

Features and benefits
- LED temperature indicator on analogue units
- Digital display of surface temperature on digital models
- Choice of glass ceramic or ceramic coated metal surface
- Hot warning light, remains active even when unplugged
- Compact design to save bench space
- Units can be stored on side, minimising required storage space
- Design allows retort base to slide underneath
- Compatible with SCT1 temperature controller

Introduction
Stuart CB302 hotplate stirrer from Wolflabs. Stylish and economical, general purpose stirrer hotplates designed with safety as well as performance in mind. The “Hot” warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres. Model CB302 has a glass ceramic top that has excellent chemical and temperature resistance. The chemical properties make the surface very easy to keep clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. 

Features and benefits
- Choice of robust aluminum or chemically resistant ceramic tops
- Flashing “Hot” warning light to warn when top plate is too hot to touch
- Independent safety circuit to protect against overheating
- Powerful stirring action
- Ideal for handling large vessels

Discounts of over 20% - http://www.wolflabs.co.uk/laboratory-products/stirrers-hotplate

Introduction
SciQuip GyroStir D HOT hotplate stirrer from Wolflabs. 

Features and benefits
- Stainless Steel 5” hotplate
- Optional external temperature probe
- Probe auto-detection & auto display mode switch
- LCD display – both set & real time vales
- Reaches temperature rapidly
- Maintenance free brushless motor
- Max plate temperature 360°C
- Display shows ‘HOT’ until below 50°C, even when switched off.
- RS232 connectivity interface port
- Supplied with 1x stirrer bar

Introduction
New Gyrostir 280, Gyrostir 340 and Gyrostir 550 hotplate stirrers from SciQuip have been added. 

Features and benefits
Gyrostir 280
- Heating temperature up to 280°C
- Stainless steel with ceramic coated hotplate for high chemical resistance
- Speed Range 100-1500rpm
- Built-in plate temperature probe
- External temperature sensor (PT1000) increases accuracy to ±0.5°C
- LED display of temperature and speed.
- 50°C HOT warning indicator for added safety (the indicator will still operate even after the unit is switched off).
- ABS casing with fire retardant material, resistant to weak acid and alkali
- 2 year warranty.

Gyrostir 340
In addition to the above, the 340 magnetic hotplate stirrer also features:
- Heating temperature up to 340°C
- Stainless Steel top plate
- Speed Range 100-1500rpm
- Easy-to-read backlit LCD display
- PC control via RS232
- 2 year warranty.

Gyrostir 550
In addition to the above, the 550 magnetic hotplate stirrer also features:
- Heating temperature up to 550°C
- Large 7” square ceramic top plate
- Speed Range 100-1500rpm
- 2 year warranty.

Introduction
New MR Hei-Connect hotplate stirrers from Heidolph have been added. The unique Kera-Disk heating plate comprises aluminum for fast heating times, and a wafer-thin ceramic coating to make the heating plate both chemically and scratch resistant.

Features and benefits
- 3 Year Warranty
- 800 watt heating power
- Hotplate temperature range: 20 to 300°C
- Speed range: 30 to 1400rpm
- Pt1000 temperature sensor for all models
- Residual heat indicator helps prevent accidental burns
- Chemically resistant Kera-Disk top plate coating
- 145mm top plate diameter
- Suitable for continuous unattended operation
- RS232 with option for software control
- 4 models to choose from
- Leading Safety Standards
- Reduced Cost of Ownership
- Superior Ease of Use

Introduction
Stuart US152D and UC152D hotplate stirrers from Wolflabs. Stylish and economical general purpose hotplate stirrers designed with safety as well as performance in mind. The compact shape takes up less bench space and makes storage easier. The hotplate has a digital display of the hotplate surface temperature and can also be used in conjunction with the SCT1 digital contact thermometer to accurately control sample temperature.

Features and benefits
- Choice of top plate: robust coated aluminium or chemically resistant ceramic
- Flashing "Hot" warning light, mains independent
- Digital display of hotplate surface temperature
- Compact space saving design

New data for 'RS232' and 'Supplied with PT100 probe' has been added to the filters on the hotplate stirrer page. An RS232 port allows connectivity to a PC for logging results and some instances control of temperature and stirring. Where as a PT100 probe ensures accurate temperature control of heating blocks and aqueous or oil based samples.

Introduction
Heidolph MR Hei-Standard hotplate stirrer from Wolflabs. The MR Hei-Standard includes all leading safety standards and features for superior ease of use and reduced cost of ownership.

Features and benefits
- For your protection an independent safety circuit will switch off heating if hotplate temperature exceeds 25 °C over set temperature.
- Upgrade this magnetic stirrer with the optional temperature controller with sensor that provides precise control of temperature to give you temperature overshoot protection and reproducible results.
- A separate on/off switch for heating prevents an unintentional heat-up. If heating is switched on the on/off button is illuminated for visual control.
- Analog knobs allow for convenient speed setting from 100 to 1,400 rpm at an accuracy of ± 2 % and temperature setting up to 300 °C.

Introduction
Grant Bio MSH-300i hotplate stirrer from Wolflabs. Digital magnetic stirrer with heating; the MSH-300i Intelli-stirrer is designed for laboratories with higher requirements. It offers digital setting and control of temperature and rotation speed. A powerful magnet allows mixing solutions with glycerine viscosity level. Maximum volume of stirred liquid is 20 litres.

Features and benefits
- Adjustable speed control: 100 to 1250rpm
- Maximum stirring volume: 20 litres
- 2 year warranty, Grant renowned technical and service support
- Stirrer bar and retort stand included as standard
- Magnetic cylinder-shape stirring bar (6 x 25 mm) supplied as standard

Discounts of over 25% - https://www.wolflabs.co.uk/laboratory-products/stirrers-hotplate

Introduction
New CRS-22H hotplate stirrer from Capp has been added. CappRondo hot plate stirrer has a load capacity of 20 liters. The heating function of the CappRondo hot plate stirrer enables processing the samples in a temperature ranging from ambient to 550°C.

Features and benefits
- Three heating modes: rapid, gradual and accurate are available on the CappRondo hotplate stirrer.
- Its plate surface is made of robust nano-crystalline glass ceramic and ensures full resistance towards liquid splash or temperature shocks.
- Programmable speed range: 200-2.200RPM. Heating from ambient to 550°C. Up to 99 individual protocols programmable.
- Large and user-intuitive display, providing an overview of all parameters and enabling easy and comfortable operation.
- Easy to clean and highly chemically resistant.
- 180x180mm top plate. Protection Class IP 21.

Introduction
Cole-Parmer - Stuart CB302 and SB302 hotplate stirrers from Wolflabs. Stylish and economical, general purpose stirrer hotplates designed with safety as well as performance in mind. The “Hot” warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.

Features and benefits
- Choice of robust aluminum or chemically resistant ceramic tops
- Flashing “Hot” warning light to warn when top plate is too hot to touch
- Independent safety circuit to protect against overheating
- Powerful stirring action
- Ideal for handling large vessels

Introduction
Cole-Parmer - Stuart CD162 and SD162 hotplate stirrers from Wolflabs. Sophisticated stirrer hotplates offering digital control of both temperature and stirring speed. Comes complete with a detachable PTFE coated probe which when immersed in a liquid sample can very accurately control its temperature to within ±0.5°C even over a very long period of time.

Features and benefits
- Digital setting and control of both temperature and speed
- Supplied complete with temperature probe for accurate control of liquid temperature
- Advanced safety features: - Flashing "Hot" warning light - Independent safety circuit to protect against overheating
- Choice of robust aluminium or chemically resistant ceramic tops

Introduction
Cole-Parmer - Stuart SB162 and CB162 hotplate stirrers from Wolflabs. Stylish and economical general purpose hotplate stirrers designed with safety as well as performance in mind. The cast aluminium body is shaped for stability and helps deflect spills away from the controls and the user. The “Hot” warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and connected to the mains. Independent safety circuit prevents overheating in the event of control failure and internal electronic components are protected against corrosion. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres.

Features and benefits
- Choice of robust aluminium or chemically resistant ceramic tops
- Flashing “Hot” warning light
- Spillproof design
- Independent safety circuit to protect against overheating
- Microprocessor control for accurate temperature setting

Introduction
Heidolph MR Hei-End hotplate stirrer from Wolflabs. The MR Hei-End includes all leading safety standards and features for superior ease of use and reduced cost of ownership.

Features and benefits
- An independent safety circuit switches off heating at an operator-programmed temperature value above your set temperature
- An additional operational safety step is required to change parameters which prevents unwanted changes to the actual setting
- The digital display allows for easy setting and monitoring of values on the illuminated readout. Speed setting from 30 to 1,400 rpm at an accuracy of ± 1 % and temperature setting up to 300 °C
- Hotplate residual heat indicator in the digital display illuminates when unit is turned off and hotplate temperature is above 50 °C to prevent accidental operator injury
- To protect your sample from overheating a safety circuit switches off heating if the temperature sensor is not immersed in your media vessel
- A separate on/off switch for heating prevents an unintentional heat-up. If heating is switched on the on/off button is illuminated for visual control
- Upgrade this magnetic stirrer with the optional Pt 1000 temperature sensor for precise temperature control, overshoot protection and reproducible results

Introduction
Cole-Parmer - Stuart CR302 hotplate stirrer from Wolflabs. Hotplate stirrer, with infra red heating. Using a very efficient infra red heater of just 900W this stirrer unit will boil 1 litre of water over 30% faster than a conventional ceramic hotplate of 1200W.

Features and benefits
- Very efficient heating saving time and energy
- Powerful magnetic stirring
- "Hot" warning light for user safety
- Chemically resistant ceramic top

Introduction
SciQuip Gyrostir 280H hotplate stirrer from Wolflabs. 

Features and benefits
- Heating temperature up to 280°C
- Stainless steel with ceramic coated hotplate for high chemical resistance
- Speed Range 100-1500rpm
- Built-in plate temperature probe
- External temperature sensor (PT1000) increases accuracy to ±0.5°C
- LED display of temperature and speed.
- 50? HOT warning indicator for added safety (the indicator will still operate even after the unit is switched off).
- ABS casing with fire retardant material, resistant to weak acid and alkali
- 2 year warranty.

New MS-H280-Pro, MS7-H550-S, MS-H-ProT and MS-H380-Pro hotplate stirrers from DLAB have been added.

Introduction
DLAB MS-H280-Pro hotplate stirrer from Wolflabs. DLAB MS-H280-Pro is a perfect device for handling small volume task on daily application, as a low temperature magnetic stirrer with Max. temperature at 280°C.

Features and benefits
- Digital temperature control with max. temperature up to 280°C
- Digital speed control with max. speed up to 1500rpm
- Stainless steel work plate with ceramic coating provides good chemical-resistant performance
- External temperature control is possible by connecting the temperature sensor (PT 1000) with an accuracy at ±0.5°C
- LED display shows temperature and speed
- The “HOT” warning will flash when the work plate temperature is above 50°C even if the hotplate is turned off

Discounts of over 25% - https://www.wolflabs.co.uk/laboratory-products/stirrers-hotplate

Hotplate stirrer Cole-Parmer - Stuart US152 15l capacity, maximum plate temperature 325°C, coated aluminium silicon plate, analogue control, 1 position, plate dimensions 150w x 150d mm (replaces US152/LABOFFERS)
Hotplate stirrer Cole-Parmer - Stuart UC152 15l capacity, maximum plate temperature 450°C, ceramic plate, analogue control, 1 position, plate dimensions 150w x 150d mm (replaces UC152/LABOFFERS)
Hotplate stirrer Cole-Parmer - Stuart CB302 15l capacity, maximum plate temperature 450°C, ceramic plate, analogue control, 1 position, plate dimensions 300w x 300d mm (replaces CB302/LABOFFERS) 

Introduction
SciQuip GryoStir 10H hotplate stirrer from Wolflabs. Analogue, 10 place, hotplate magnetic stirrer.

Features and benefits
- Plate temperature up to 100°C
- 10 positions
- Uniform temperature distribution
- Individually controlled positions
- Maintenance free brushless motor
- Stainless Steel plate with silicone film – anti-slip & anti-corrosion
- Supplied with 10x stirrer bars

New MSH and CH series of hotplate stirrers from Clifton have been added.

Introduction
Heidolph Hei-Connect hotplate stirrer from Wolflabs. 

Features and benefits
- All units come with digital display to allow for easy setting and monitoring values on the illuminated readout
- You can work with dry ice – as a robust thermal insulation prevents corrosion inside the housing by preventing condensate from collecting and dripping on any electronic components
- A free software program is available for the MR Hei-Connect which supports you to automate and to safe your process parameters
- The strong magnetic field allows for easy stirring of even higher viscosity media
- The unique Kera-Disk coating is extremely chemical-resistant and scratch-proof, and therefore the plate can be cleaned easily from solvents, oil or other contaminations
- The chemically resistant Kera-Disk® hot plate allows for immediate heat transfer resulting in quick heat-up times
- In case the heating function fails, stirring will not be discontinued to avoid thermal damage to your sample

Introduction
New HSMNHS4CAL hotplate stirrer from Ohaus has been added. The Ohaus Basic Mini Hotplates, Stirrers, and Hotplate-Stirrers are rugged, compact units that heat and stir up to 1000 mL of liquid. Ceramic tops feature a chemical resistant white re$ective top plate that is easy to clean. Bi-metallic thermostat o%ers reliable temperature control. Powerful heater reaches maximum temperature in only minutes. Powerful motor and magnet deliver reliable and consistent stirring. Compact design saves bench space. Built-in support rod holder with locking knob accepts optional Support Rod and Clamp Kit.

Features and benefits
- New ergonomic design
- Ideal for educational labs
- Built in support rod holder
- Chemical-resistant, easy-to-clean ceramic top plate
- Constructed of cool-touch, chemical-resistant housing

"Thank you very much for organising this. I am hoping you both like chocolate, I just posted a couple of bars of the chocolate we make as a small thank you. Hopefully should be with you Friday, Monday at latest. Neil"

- Thank you Neil the chocolate was delicious!!

Introduction
Cole-Palmer CD162 hotplate stirrer from Wolflabs.

Benefits and features
- Three independently controlled stirring/heating positions.
- Separate "Hot" warning lights for each plate. 
- Powerful magnets for strong magnetic coupling.
- Easily accommodates 3 x 2 litre beakers.
- Unit only requires one power point and is ideal for quality control applications where multiple samples require simultaneous heating and stirring, under the same conditions.
- The top plates are a robust aluminium/silicon alloy, providing even plate temperature.

Introduction
Cole-Palmer - Stuart US152 hotplate stirrer from Wolflabs.

Features and benefits
- Hot warning light, remains active even when unplugged.
- Choice of glass ceramic or ceramic coated metal surface.
- Compact design to save bench space.
- Units can be stored on side, minimising required storage space.
- Design allows retort base to slide underneath.

Introduction
Cole-Parmer - Stuart UC152D hotplate stirrers from Wolflabs.

Features and benefits
- LED temperature indicator on analogue units.
- Digital display of surface temperature on digital models.
- Choice of glass ceramic or ceramic coated metal surface.
- Hot warning light, remains active even when unplugged.
- Compact design to save bench space.
- Units can be stored on side, minimising required storage space.
- Design allows retort base to slide underneath.

Introduction
Clifton MSH-1 hotplate stirrer from Wolflabs.

Features and benefits
- Maximum stirring volume 15 litres.
- Economically priced, robust design.
- Durable heating surface.
- Smooth start stirring.

Introduction
Grant Bio hotplate stirrer from Wolflabs. The MSH-300i is designed for laboratories with higher requirements. It offers a digital setting and control of temperature and rotation speed. A powerful magnet allows mixing solutions with glycerine viscosity level. 

Features and benefits
- Adjustable speed control: 100 to 1250rpm.
- 20 litres maximum stirring volume.
- 2 year warranty.
- Stirrer bar and retort stand included as standard.

Introduction
Capp CRS-22H hotplate stirrer from Wolflabs. The CRS-22H offers three heating modes: rapid, gradual and accurate heating. It operates with heating temperatures ranging from ambient to 550°C. Its plate surface is made of robust nano-crystalline glass ceramic and ensures full resistance towards liquid splash or temperature shocks.

Features and benefits
- Compact and user-friendly.
- Nano-crystalline glass ceramic plate.
- Multiple applications.

Introduction
Clifton CHS-1E hotplate stirrer from Wolflabs. The CHS-1E ceramic hotplate stirrer is designed for general laboratory requirements.

Features and benefits
- Stirring speed: 200 - 1300rpm.
- Digital stirring control.
- Temperature Range: ambient to 450°C, with remote probe maximum temperature control maximum 200°C.

Introduction
SciQuip Gyrostir 550H hotplate stirrer from Wolflabs. This compact and affordable unit offers the same market leading technology and unparalleled performance as the SciQuip larger hotplate stirrers, making this a perfect choice for any biotech or chemical laboratory where space is a premium. This hotplate stirrer has an in-built plate temperature sensor but is also supplied with an external temperature probe for precise measurement of the sample.

Features and benefits
- Heating temperature up to 550°C.
- Large 7” square ceramic top plate.
- Speed Range 100-1500rpm.
-2 year warranty.

Introduction
Cole-Parmer - Stuart CD162 hotplate stirrer from Wolflabs. The CB162 has a glass ceramic top which has excellent chemical and temperature resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes.

Features and benefits
- Spillproof design.
- Flashing “Hot” warning light.
- Independent safety circuit to protect against overheating.
- Microprocessor control for accurate temperature setting.

Introduction
Cole-Parmer - Stuart CB302 hotplate stirrer from Wolflabs.

Features and benefits
- Three independently controlled stirring/heating positions.
- Separate "Hot" warning lights for each plate.
- Powerful magnets for strong magnetic coupling.

Introduction
New CRS-21H hotplate stirrer from Capp has been added.

Features and benefits
- Programmable in terms of both speed and time.
- Time setting ranges from 1 to 999 minutes.
- Equipped with a large display, showing all critical parameters in a clear, visible way.
- Heats the samples from the ambient temperature up to 320°C.

Introduction
New MR Hei-Connect hotplate stirrers from Heidolph have been added.

Features and benefits
- Reproducible results.
- Digital display enables full process monitoring and precise setting of all parameters.
- Unit allows for easy setting and monitoring of values in the illuminated readout.
- Separate on/off switch for heating prevents an unintentional heat-up.

New RCT Basic, RET Basic, RT, C-MAG and RET Control-Vis hotplate stirrers from IKA have been added.

Introduction
Cole-Parmer - Stuart SD152K hotplate stirrer from Wolflabs. The SD152K offers precise temperature control and stirring speed of your samples. Powerful magnets provide stirring speeds of up to 1400 rpm and the ability to mix large volumes up to 15 litres. The simple body design allows spillages to be easily deflected from the user. The front control panel resists spills and the glass is chemically toughened for extra resilience. When plate temperature rises above 50°C, a hot warning light flashes even if the unit is turned off or unplugged.

Features and benefits
- Hot surface warning light flashes when plate temperature is above 50°C.
- Durable front panel resists spills and chemicals.
- Available in various interface, plate surface, and body colour configurations.
- Large digital display shows set and actual temperature.

Introduction
Clifton CH-1E hotplate stirrer from Wolflabs.

Features and benefits
- Easy clean ceramic top and chemical resistant.
- Rapid warm up times.
- Over temperature protection.
- Smooth start stirring up to maximum speed 1500rpm.
- Robust design.

Introduction
Cole-Parmer - Stuart CS152W hotplate stirrer from Wolflabs.

Features and benefits
- Top plate manufactured from robust coated aluminum.
- Flashing 'Hot' warning light.
- Accurate temperature control with LED indicator scale.
- Compact space-saving design.
- Powerful magnets and motor give stirring speeds up to 2000 rpm.

Introduction
SciQuip GyroStir 550H hotplate stirrer from Wolflabs.

Features and benefits
- Heating temperature up to 280°C.
- Stainless steel with ceramic coated hotplate for high chemical resistance.
- Speed Range 100-1500rpm.
- Built-in plate temperature probe.
- LED display of temperature and speed.
- 2 year warranty.

Introduction
New UC150 and US150 hotplate stirrer from Cole-Parmer - Stuart have been added.

Features and benefits
- Compact and stackable design for reduced benctop and storage footprint.
- Hot warning light remians on even when unplugged.
- Optional temperature controller accuratley accurately regulates sample temperature.
- Easy to use digital display. 

Introduction
New Cole-Parmer SHP-200-L-C, SHP-200-L-S and SHP-200-IR-L Hotplate Stirrers from Wolflabs.

Features and benefits
- Easy to use temperature control dials
- Powerful stirring action
- Robust and durable construction
- Large square plate area ideal for handling large vessel

Introduction
Ohaus Guardian 3000 hotplate stirrers E-G31HSRDS, E-G31HS07C and E-G31HS04C from Wolflabs.

Features and benefits
- LCD display
- Spill-resistant design for long life
- 80rpm to 1600rpm speed range
- Easy to use with intuitive icons

Introduction
NEW Heidolph Hei-PLATE Core Hotplate stirrers from Wolflabs.

Features and benefits
- Absolutely robust and durable
- Leading safety standards and superior ease of use
- Top chemical resistance and fastest heating times
- Illuminated display and LED rings
- 100rpm to 1400rpm speed range

Introduction
NEW IKA RCT Basic hotplate stirrer from Wolflabs.

Features and benefits
- Largest display in its class with easy-to-read LED display
- 50rpm to 1500rpm speed range
- USB and RS232 interface 
- QR code for quick access to device information, accessories, downloads and extended warranty
- Easily accessible main switch on the front of the device