More manufacturers

Cole-Parmer - Jenway

Laboratory products from this manufacturer

Jenway has an extensive range of high quality scientific and analytical instrumentation. The range includes a variety of UV/visible, life science, double beam and microvolume spectro photometers. As well as this, Jenway offer various fluorimeters, oxygen probes and colourimeters. Additionally Jenway support a large selection of electrochemisty apparatus for pH measurement, and for the measurement of dissolved oxygen, conductivity and specific ions in both portable and bench meters.

Products from this manufacturer Number of products

Colorimeters

1 product >
605001  6051

Dissolved Oxygen Meters

1 product >
950001  9500

Flame Photometers

2 products >
500701  PFP7
500801  PFP7/C

pH and Conductivity Meters

10 products >
351001  3510
351000  3510
352000  3520
352001  3520
354001  3540
550271  550
550000  550
570271  570
570000  570
354000  3540

Spectrophotometers

14 products >
630501  6300
632501  6320D
635001  6305
6850/230V  6850
720001  7200
720501  7205
730001  7300
730501  7305
731001  7310
731501  7315
720601  Genova Bio Life Science
720605  Genova Bio Life Science with TrayCell accessory
737501JEN  Genova Nano
736501JEN  Genova Plus

Other laboratory products -

444 products >
535001  Compressor Cole-Parmer - Jenway air, model no. 8515, 230V
351201  Model 3510 pH meter supplied a s above with European power s
661201  Sample chamber Cole-Parmer - Jenway single cell module, fitted with water heated cuvette holder (648001), for 6700, 6705 and 6715 spectrophotometers, (circulating water bath also required but not included)
627177  Wavelength 550nm
27232  Probe Cole-Parmer - Jenway ATC/temperature as supplied with 3340 and 3345
924068  Environmental pH electrode wit h S7 connector for use with M
627167  Wavelength 460nm
500176  Separator Cole-Parmer - Jenway water(small)
541650B  Replacement B.O.D. membranes (3) and KCl fill solution for 541
60232  Pack of 500 plastic cuvettes (5 boxes of 060 230)
35127  UV (quartz) semi-micro (1ml) cuvette
640133  Dust cover
606018  Filter - wavelength 540nm
924052  Waterproof environmental combi nation pH electrode with ATC
35087  Visible (glass) 50mm path length cuvette
627156  Wavelength 337nm
735601  Holder Cole-Parmer - Jenway for boiling tubes, for 7300, 7305, 7310 and 7315 spectrophotometers
25156  Conductivity calibration standard 12.88mS (500ml)
660403  Carousel Cole-Parmer - Jenway additional, for use with automatic eight-cell changer (660401), for 6700, 6705 and 6715 spectrophotometers
500127  Barium filter
627152  Wavelength 320nm
924001  pH electrode Cole-Parmer - Jenway general purpose epoxy bodied for standard measurements of general solutions maximum temperature 60°C
627192  Wavelength 670nm
627180  Wavelength 577nm
924079  High temperature glass bodied combination for solutions up to 110°C
660101  Printer Cole-Parmer - Jenway internal, for 6700, 6705, 6715, 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
627187  Wavelength 633nm
627188  Wavelength 640nm
627185  Wavelength 620nm
522019B  Replacement membranes (3) and KCl fill solution for DO2 probe
25180  Solution Cole-Parmer - Jenway pH 7 buffer sachets ready-to-use, pack of 10
35138  UV (quartz) ultra-micro (100µl) cuvette
60247  Pack 100 (10mm) plastic (3ml) cuvettes
544008  Dust cover Cole-Parmer - Jenway for no. 3340, 3345 and 4330
924034  Steel protected spear pH electrode kit
504052  Pack of silver electrodes (1 cathode 2 detectors)
522018  B.O.D. bottle attachment 6.0º
627196  Wavelength 700nm
25308  Chlorine (Total) (100 tests)
640508  Deuterium lamp Cole-Parmer - Jenway (6405 and 6505)
35123  Visible (glass) micro (500µl) cuvette
522017  B.O.D. bottle attachment 3.0º
60288  Printer ribbon Cole-Parmer - Jenway for printer no. 543001
60084  Cuvettes Cole-Parmer - Jenway plastic, 10 x 10mm, pack of 100
627154  Wavelength 330nm
924005  pH electrode Cole-Parmer - Jenway glass bodied combination for standard measurements of general solutions
35263  Replacement 1mm path length cap for above
627173  Wavelength 530nm
500125  Calcium filter
25306  Bromine (100 tests)
25330  Phosphate - Ortho (100 tests)
25009  Calibration standard 1000ppm Calcium
924050  Environmental electrode (max. temp.50°C) (replaces 924050/LABOFFERS)
627166  Wavelength 440nm
627141  Wavelength 250nm
25007  Solution Bibby calibration standard 120mmol/l Sodium 2mmol/l Potassium
25006  Solution Bubby calibration standard 140mmol/l Sodium 5mmol/l Potassium
924036  Single Junction Ag/AgCl reference (100°C)
660201  Sample chamber Cole-Parmer - Jenway with sipper module fitted, for 6700, 6705 and 6715 spectrophotometers
35027  Cuvette Bibby visible glass 10mm path length
627189  Wavelength 650nm
627174  Wavelength 532nm
627164  Wavelength 430nm
035262  Tray Cell for ultra-micro sample volumes from 0.7 to 5 micro
35088  Calibration set Cole-Parmer - Jenway visible range, for 6300, 6310, 6320D, 6700, 6705, 6715, 6850, 6850 IQ/OQ and Aquanova spectrophotometers
924070  pH electrode Cole-Parmer - Jenway 3 in 1 pH/temperature epoxy bodied for 370, 3505, 3510, 3520 and 3540 meters maximum temperature 80°C
630304  Holder Cole-Parmer - Jenway with reduced aperture for micro-cuvettes, for 6300, 6305, 6320D, 6700, 6705, 6715, 7200, 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
21033  Mains Cole-Parmer - Jenway 230V leaded power supply, all models
632001  Pump Cole-Parmer - Jenway sipper (European version), supplied with inlet and outlet tubing, for 6300, 6305 and 6320D spectrophotometers
627182  Wavelength 590nm
924015  pH electrode Cole-Parmer - Jenway glass pH only requires separate reference electrode
60254  10 x 10mm glass cell (Visible)
27211  Conductivity probe with ATC e poxy K=0.1 (for use with 451
627158  Wavelength 370nm
354101  Conductivity meter Cole-Parmer - Jenway pH and conductivity meter Cole-Parmer - Jenway 43540 portable, 3 calibration points, standard probe included, PC connectivity with US plug
451201  Conductivity/temperature meter Jenway Model 4510
627178  Wavelength 560nm
924003  pH electrode Cole-Parmer - Jenway Redox (platinum ORP) glass bodied for redox measurements maximum temperature 80°C
924030  TRIS buffer/TE buffer Cole-Parmer Jenway semi-micro (replaces 924030)
451001  Conductivity meter Cole-Parmer - Jenway 4510 supplied with glass conductivity probe with ATC (K=1) (027 013), electrode holder and UK power supply
627186  Wavelength 630nm
25160  Solution Cole-Parmer - Jenway pH electrode fill 3M KCl 100ml
605064  Lamp Bibby tungsten filament
924076  Electrode Cole-Parmer - Jenway glass bodied combination for use in non-aqueous solutions (replaces 924076/LABOFFERS)
60230  Cuvettes Cole-Parmer - Jenway plastic, UV and visible wavelengths, pack of 100
541553  Solution Cole-Parmer - Jenway KCl fill solution for DO2 probe 30ml
632511  Holder Cole-Parmer - Jenway dual cell, for 10mm cuvettes and 12.7mm diameter tubes, for use with 6320D spectrophotometer only
27298  Epoxy bodied conductivity prob e K=1 (mini-DIN) (Model 470)
25163  Solution Cole-Parmer - Jenway pH 2.00 buffer 500ml
60287  Paper roll Cole-Parmer - Jenway for printer no. 543001
25027  Solution Bibby calibration standard 160mmol/l Sodium 80mmol/l Potassium
35121  500µl glass cell
25025  Calibration standard 3000ppm Barium
627183  Wavelength 600nm
500192  Air tubing (2 metres)
19146  USB memory stick Cole-Parmer - Jenway 4GB for external memory, for 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
35125  UV (quartz) micro (500µl) cuvette
735201  Pump Cole-Parmer - Jenway sipper for 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
500124  Potassium filter
660301  Sample chamber Cole-Parmer - Jenway with peltier module fitted, for 6700, 6705 and 6715 spectrophotometers
25008  Solution Bibby calibration standard 1.00mmol/l Lithium
25021  Calibration standard 1000ppm Sodium
627162  Wavelength 415nm
500070  Ignition electrodes (pack of 3)
012094  Lamp module Cole-Parmer - Jenway xenon, for 6305 and 6315 spectrophotometers
25162  Solution Cole-Parmer - Jenway pH 9.22 buffer 500ml
637071  Holder Cole-Parmer - Jenway for 10mm square cuvettes, 16 and 24mm diameter tubes, for 6300, 6305, 6320D, 6700, 6705, 6715, 7200, 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
35086  Cuvette Bibby visible glass 20mm path length
735401  Holder Cole-Parmer - Jenway automatic 8 position turret, for 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
627171  Wavelength 510nm
35124  UV (quartz) ultra micro (50µl) cuvette
27227  Epoxy bodied combination pH/te mperature probe (as supplied
627191  Wavelength 660nm
627151  Wavelength 313nm
660503  Carousel Cole-Parmer - Jenway additional, for water heated automatic six-cell changer (660501), for 6700, 6705 and 6715 spectrophotometers
627140  Wavelength 350nm
924304  Chloride combination ISE
500177  Separator Cole-Parmer - Jenway water(large)
500126  Lithium filter
924080  Glass bodied combination for use in aggressive chemical appl
627138  Wavelength Cole-Parmer - Jenway 365nm
27113  Conductivity probe with ATC g lass K=0.1 (for use with 4510
500179  Regulator Cole-Parmer - Jenway propane (2 stage adjustable pressure)
25138  Conductivity calibration standard 1413µS (500ml)
60087  Cuvette Bibby plastic visible wavelengths only 1.5, pack of 100
25039  Solution Cole-Parmer - Jenway pH 10 buffer blue 500ml
35264  Replacement 0.2mm path length cap for above
504053  Pack of 3 silver anodes
500134  Cover Cole-Parmer - Jenway dust
627159  Wavelength 390nm
924051  Food electrode (max. temp. 60°C) (replaces 924051/LABOFFERS)
500093  Filter Cole-Parmer - Jenway fuel
27900  Pure Water Conductivity Probe with ATC stainless steel pee
37551  Converter Cole-Parmer - Jenway RS232 to USB, for use with computers without a serial point, for 6300, 6305, 6320D, 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
27235  Conductivity probe epoxy bodi ed with ATC K=0.1 (model 4150
13173  BNC meter Cole-Parmer - Jenway to S7 lead less electrode connector
27502  Teflon coated ATC probe for us e with corrosive/aggressive s
25197  3M KCl/AgCl gel fill solution for food electrode (150ml)
25158  Redox standard solution 300mV (500ml)
924078  pH electrode Cole-Parmer - Jenway long glass bodied combination with 350mm reach for measurement in flasks
627148  Wavelength 300nm
924035  Replacement electrode for the above kit
680011  Dust cover for Model 6800 Spectrophotometer
924077  Jam Jelly and Preserves epoxy bodied combination
33267  Carry case Cole-Parmer - Jenway for model 350
25309  Chlorine Dioxide (100 tests)
627145  Wavelength 280nm
33290  Case Cole-Parmer - Jenway for storage and carrying, for 6300 and 6305 spectrophotometers only
60253  10 x 10mm glass cell (UV)
37702  Roll Cole-Parmer - Jenway paper for thermal printer, for 6700, 6705, 6715, 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
627179  Wavelength 570nm
33269  Carry case (Model 470)
924300  Nitrate combination ISE
924017  Double Junction Ag/AgCl reference
627125  Filter Cole-Parmer - Jenway bandpass VG9 480 - 580nm
500123  Sodium filter
627137  Wavelength Cole-Parmer - Jenway 515nm
627128  Ilford Cole-Parmer - Jenway 201 545nm
735701  Pump Cole-Parmer - Jenway combined sipper and peltier, for 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
627160  Wavelength 405nm
627136  Wavelength Cole-Parmer - Jenway 470nm
627181  Wavelength 580nm
627155  Wavelength 334nm
627142  Wavelength 260nm
541520B  DO2 probe with ATC (as supplied with model 9150 and 9200)
627195  Wavelength 694nm
660701  Sample chamber Cole-Parmer - Jenway with sipper/peltier module fitted, for 6700, 6705 and 6715 spectrophotometers
627134  Wavelength Cole-Parmer - Jenway 380nm
352101  Model 3520 pH meter supplied as above with US power supply
430231  Replacement combined pH/conduc tivity probe for use with Mod
27802  Epoxy bodied conductivity prob e K=10 (mini-DIN) (Model 470)
627129  Kodak Cole-Parmer - Jenway 8 475nm
60422  Rack Cole-Parmer - Jenway moulded, for 16 10 x 10mm cuvettes, for 6300, 6305, 6320D, 6700, 6705, 6715, 6850 and 6850 IQ/OQ spectrophotometers
50501  Software Cole-Parmer - Jenway DataWay PC, includes CD ROM, interface cable and instructions, for 6300, 6305, 6320D, 6400, 6405, 6500 and 6505 spectrophotometers, and 3510, 3520, 3540, 4510 and 4520 pH and conductivity meters
35091  Calibration set Cole-Parmer - Jenway UV / visible range, for 6305, 6315, 6405, 6505, 6705, 6715, 6850 and 6850 IQ/OQ spectrophotometers
522016  Attachment Cole-Parmer - Jenway B.O.D. bottle 2.5º
25004  Solution Bibby calibration standard 100mmol/l Sodium 100mmol/l Potassium
660401  Sample chamber Cole-Parmer - Jenway with automatic eight-cell changer module fitted, for 6700, 6705 and 6715 spectrophotometers
25024  Calibration standard 1000ppm Lithium
627153  Wavelength 326nm
627193  Wavelength 680nm
25192  Solution Cole-Parmer - Jenway for pH electrode storage 250ml
60231  Pack of 100 (1.6ml) UV plastic cuvettes
606017  Filter - wavelength 405nm
627143  Wavelength 265nm
950101  Model 9500 DO2 meter supplied as above with US power supply
452000  Conductivity meter Cole-Parmer - Jenway Model 4520 Conductivity/temp meter with graphics display and
627175  Wavelength 540nm
627126  Filter Cole-Parmer - Jenway bandpass UG1 320 - 380nm
627190  Wavelength 656nm
627150  Interference Filter Cole-Parmer - Jenway wavelength 310nm
25164  Conductivity calibration standard 84µS (500ml)
25307  Chlorine (Free) (100 tests)
25023  Calibration standard 1000ppm Potassium
452201  Model 4520 Conductivity/temp m eter supplied as above with E
950201  Model 9500 DO2 meter supplied as above with European power s
627124  Filter Cole-Parmer - Jenway bandpass BG28 380 - 500nm
21031  Mains Cole-Parmer - Jenway European 230V power supply, all models
605007  Water heated cell holder
500191  Gas tubing (2 metres)
25179  Solution Cole-Parmer - Jenway pH 4 buffer sachets ready-to-use, pack of 10
35143  Micro-cuvettes Cole-Parmer - Jenway disposable plastic UV and visible wavelengths, for use with micro-cuvette holder, pack of 100
648001  Water heated single cuvette holder
632031  Pump Cole-Parmer - Jenway sipper (US version), supplied with inlet and outlet tubing, for 6300, 6305 and 6320D spectrophotometers
25037  Solution Cole-Parmer - Jenway pH 4 buffer red 500ml
25181  Solution Cole-Parmer - Jenway pH 10 buffer sachets ready-to-use, pack of 10
33268  Carry case Cole-Parmer - Jenway for model 370 and 430
27013  Conductivity probe with ATC g lass K=1 (as supplied with 45
650021  6505 Application card (Re-boot disk for operating system -
627168  Wavelength 480nm
35122  500µl quartz cell
627165  Wavelength 436nm
25157  Redox standard solution 200mV (500ml)
351101  Model 3510 pH meter supplied as above with US power supply
924007  pH electrode Cole-Parmer - Jenway 4.5mm semi-micro 90mm glass bodied for small volume liquid samples maximum temperature 80°C
543001  Printer Cole-Parmer - Jenway 40 column serial, with interface cable, paper roll no. 60287, ribbon no. 60288, UK power adapter, for 6300, 6305 and 6320D spectrophotometers, 3205 ion meter (requires interface cradle), 4200 conductivity meter (requires interface cradle), and 9200 dissolved oxygen meter (requires interface cradle)
735301  Peltier Cole-Parmer - Jenway for 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
627176  Wavelength 546nm
627139  Wavelength Cole-Parmer - Jenway 450nm
970231B  DO2 probe (mini-DIN) (Model 970)
27212  Conductivity probe with ATC e poxy K=1 (for use with 4510
627163  Wavelength 420nm
627131  Glass Cole-Parmer - Jenway 305nm
627194  Wavelength 690nm
25161  Solution Cole-Parmer - Jenway pH electrode cleaning 500ml
352201  Model 3520 pH meter supplied as above with European power supply
21030  Mains Cole-Parmer - Jenway UK 230V power supply, all models
37701  Printer Cole-Parmer - Jenway thermal, with IrDA supplied with roll of paper, universal power adapter and interface cable, for non IrDA units, for 3510, 3520, 4510, 4520, 3540 and 9500, not for use with 3505
924010  pH electrode Cole-Parmer - Jenway spear type 6mm stem glass bodied for small volume soil and slurry samples maximum temperature 80°C
35029  Cuvette Bibbby visible glass 40mm path length
35045  Visible (glass) flow-through cell 80µl
903300  Holder and stand Cole-Parmer - Jenway for electrode no. 3345, 3505, 3510, 3520, 4510, 4520, 3540 and 9500
630204  Holder Cole-Parmer - Jenway for 10 x 10mm path length cuvettes, for 6300, 6305, 6320D, 6700, 6705, 6715, 7200, 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
500178  Regulator Cole-Parmer - Jenway butane (2 stage adjustable pressure)
33270  Carry case Cole-Parmer - Jenway for model 970
452101  Model 4520 Conductivity/temp m eter supplied as above with U
354201  Conductivity meter Cole-Parmer - Jenway pH and conductivity meter Cole-Parmer - Jenway 43540 portable, 3 calibration points, standard probe included, PC connectivity with EU plug
27801  Epoxy bodied conductivity prob e K=0.1 (mini-DIN) (Model 470
634001  Holder Cole-Parmer - Jenway 4 position manual, for cuvettes, for 6300, 6305 and 6320D spectrophotometers
983030  Powder Cole-Parmer - Jenway vial for zero calibration for DO2 probe
500180  Regulator Cole-Parmer - Jenway natural gas
451000  Conductivity meter Cole-Parmer - Jenway Model 4510 Conductivity/temp meter with dual display and TDS
627184  Wavelength 610nm
924069  Food pH electrode with S7 conn ector for use with Model 430
25005  Solution Bibby calibration standard 160mmol/l Sodium 8mmol/l Potassium
630005  Holder Cole-Parmer - Jenway for cuvettes, 10-100mm adjustable path length, for 6300, 6305, 6320D, 6700, 6705, 6715, 7200, 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
542009  Interface cable kit Cole-Parmer - Jenway for 6300, 6305 and 6320D spectrophotometers
522023B  DO2 probe with ATC (as supplied with 9500)
538014  Adapter lead (Waterproof conne ctor to BNC electrode connect
627172  Wavelength 520nm
35028  UV (quartz) 10mm path length cuvette
627133  Wavelength Cole-Parmer - Jenway 340nm
660501  Sample chamber Cole-Parmer - Jenway with water heated automatic six-cell changer module fitted, for 6700, 6705 and 6715 spectrophotometers
19133  SD card Cole-Parmer - Jenway 2GB for external memory, for 6700, 6705 and 6715 spectrophotometers
35126  Visible (glass) semi-micro (1ml) cuvette
627135  Wavelength Cole-Parmer - Jenway 400nm
60255  Flow cell
25196  Solution Cole-Parmer - Jenway pH electrode fill 3M KCl saturated with AgCl 150ml
27500  ATC/temperature probe (as supplied with 370, 3505, 3510, 3520 and 3540)
35047  UV (quartz) flow-through cell 80µl
924049  Life Science electrode (max. temp. 100°C)
35120  100µl quartz cell
627161  Wavelength 410nm
924002  pH electrode Cole-Parmer - Jenway 12mm stem toughened spear ended glass bodied for measurement of soil and slurry samples maximum temperature 80°C
735001  Dust cover Cole-Parmer - Jenway for 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
627130  Kodak Cole-Parmer - Jenway 2B 395nm
627169  Wavelength 490nm
25165  TDS calibration standard 1382ppm (500ml)
500019  Nebuliser
627127  Kodak Cole-Parmer - Jenway 29 610nm
21008  Battery for model 3505 (one required)
627170  Wavelength 500nm
27213  Conductivity probe with ATC e poxy K=10 (for use with 4510
37801  Cable Cole-Parmer - Jenway serial 9 way for connection to PC, not for use with 3505
924047  pH/temperature electrode Cole-Parmer - Jenway for use at maximum temperature of 80C.
25038  Solution Cole-Parmer - Jenway pH 7 buffer yellow 500ml
35079  Visible (glass) 100mm path length cuvette
736201  Holder Cole-Parmer - Jenway water heated, for 10 x 10mm path length cuvettes, for 7300, 7305, 7310, 7315, Genova Plus and Genova Nano spectrophotometers
627157  Wavelength 360nm
13161  Premier meter Jenwat to S7 lead less electrode connector
627132  Wavelength Cole-Parmer - Jenway 254nm
25139  Conductivity calibration standard 10µS (500ml)
21007  Battery Cole-Parmer - Jenway 3 required for each premier meter
60229  Cuvettes Cole-Parmer - Jenway plastic, 10 x 10mm, pack of 500
627146  Wavelength 290nm
452001  Conductivity meter Cole-Parmer - Jenway Model 4520 Conductivity/temp meter with graphics display and supplied with glass conductivity probe
630028  Dust cover Cole-Parmer - Jenway, for 6300, 6305 and 6320D spectrophotometers, and 6270, 6280 and 6285 fluorometers
628200  System Cole-Parmer - Jenway heated cell comprising heated cell holder controller
451101  Model 4510 Conductivity/temp m eter supplied as above with U
541512  Replacement membrane protective cap
627144  Wavelength 270nm
025171  Flame photometer accessory Cole-Parmer - Jenway Cleaning solution for flame photometer 1L
685204  Holder Cole-Parmer - Jenway for 10 x 10mm path length cuvettes, for 6850 and 6850 IQ/OQ spectrophotometers
685131  Holder Cole-Parmer - Jenway single cell water heated, for 10 x 10mm cuvettes, for 6850 and 6850 IQ/OQ spectrophotometers
685005  Holder Cole-Parmer - Jenway for 10-100mm adjustable path length cuvettes, for 6850 and 6850 IQ/OQ spectrophotometers
685304  Holder Cole-Parmer - Jenway for micro-cuvettes, for 6850 and 6850 IQ/OQ spectrophotometers
685401  Cell changer Cole-Parmer - Jenway 8 position automatic, for 6850 and 6850 IQ/OQ spectrophotometers
21060  Universal power supply for the 7300, 7305, 7310, 7315, Genova Plus and Genova Nano
35030  UV (quartz) 40mm path length cuvette
35056  UV (quartz) 20mm path length cuvette
35092  DNACON Solution, calibration standard for the Genova Nano micro-volume spectrophotometer
35281  UV (quartz) 50mm path length cuvette
35282  UV (quartz) 100mm path length cuvette
351100  Model 3510 pH meter supplied as above without electrode and US power supply
351200  Model 3510 pH meter supplied as above without electrode and European power supply
352100  Model 3520 pH meter supplied as above without electrode and US power supply
352200  Model 3520 pH meter supplied as above without electrode and European power supply
354100  Model 3540 pH meter supplied as above without electrode and US power supply
354200  Model 3540 pH meter supplied as above without electrode and European power supply
451100  Model 4510 pH meter supplied as above without electrode and US power supply
451200  Model 4510 pH meter supplied as above without electrode and European power supply
452100  Model 4520 pH meter supplied as above without electrode and US power supply
452200  Model 4520 pH meter supplied as above without electrode and European power supply
685021  Deuterium lamp for Model 6850 Spectrophotometer
685301  Peltier system Cole-Parmer - Jenway with 10x10mm cell accessory, for 6850
924100  Epoxy bodied TRIS probe with gel fill solution and in-built temperature sensor (for use with 370, 3505, 3510, 3520 and 3540)
6850/230V/IQOQ  Model 6850 Variable Bandwidth Double Beam Spectrophotometer supplied with single cuvette holders (for 10 x 10mm cuvettes in sample and ref), Prism PC Software on CD ROM, USB stick, USB connection cable and dongle, 2 x quartz cuvettes, 4 x glass cuvettes, FREE dust cover and 230V power supply. Supplied with IQ/OQ documentation.
685201  Sipper pump system Cole-Parmer - Jenway with 10x10mm cell accessory, for 6850
685601  Combined sipper-peltier system Cole-Parmer - Jenway with 10x10mm cell accessory, for 6850
012075  Tungsten halogen lamp Cole-Parmer - Jenway
13203  Interface cable to connect RS232 on the 73 series spectrophotometer to RS232 port on a computer
27815  Glass bodied 4mm diameter conductivity probe, 120mm reach
27816  Glass bodied 6mm diameter conductivity probe, 180mm reach
35283  Visible (glass) semi-micro (1ml) cuvette, black sides
35284  UV (quartz) semi-micro (1ml) cuvette, black sides
685092  Dongle for 6850 PC software
685501  4 cell water jacketed cuvette holder, requires water bath and circulator which are sold separately
924075  Electrode Cole-Parmer - Jenway glass bodied combination for use in non-aqueous solutions, 4.5mm semi-micro version of the 924076 probe
33274  Carry case (model 550)
33275  Carry case (model 570)
170100  ATC/temperature probe (as supplied with 550)
170101  ATC/temperature probe (as supplied with 570)
725201  Holder Cole-Parmer - Jenway heated, 10 x 10mm single curvette, for the 7200 spectrophotometer only
SMP50/PRINTER  Printer Cole-Parmer - Jenway/Stuart external for the 7200 spectrophotometer and SMP50 melting point apparatus
PFP7/MINKIT  Kit Cole-Parmer - Jenway minor spares
6705/LA  Lamp module Cole-Parmer - Jenway xenon, for 6705 and 6715 spectrophotometers
73SER/DMA  Display Module Assembly
685024  Tungsten halogen lamp kit for Model 6850 Spectrophotometer
7300/05/LID  Lid Assembly
7310/15/LID  Lid Assembly
PFP7/NVA  Needle Valve Assembly
PFP7/IPA  Ignition Probe Assembly
PFP7/ARA  Air Regulator Assembly
73UVVIS/SA  UV/VIS Solenoid Assembly
PFP7/PPA  PSU PCB Assembly
73SER/EXMA  Exit Mirror Assembly
12050  Lamp Cole-Parmer - Jenway tungsten halogen, for model 7200 and 7205
7310/15/VDMA  V Drive Module Assembly
PFP7/SVA  Solenoid Valve Assembly
I/500219  Filter Wheel Assembly (PFP7C)
73SER/PPCBA  Power PCB Assembly
73SER/MCA  Monochromator Cover Assembly
PFP7/TA  Transformer Assembly
500551  Drain Trap Kit
73SER/ADAP  PCB Adapter Assembly
PFP7/OPA  Opto PCB Assembly
73SER/MSA  Grating Microswitch Assembly
73SER/BSS  Brass Shim Set
73VIS/LHA  Lamp Holder Assembly
73SER/MA  Motor Assembly
73VIS/FU  Fan Unit
PFP7/FKB  Mk2 Fuel Knob Assembly
73VIS/TCU  Thermal Cut-out
PFP7/DIA  Dark I Assembly
PFP7/LKB  Mk2 Lge. Knob (d.p., Coarse, Filter Select) Assembly
73SER/FOOT  Foot Kit
PFP7/SKB  Mk2 Small Knob (Blank & Fine) Assembly
700000  Dust cover Cole-Parmer - Jenway for 7200 and 7205 series
961773  Membrane (Fascia)
961775  Membrane (Fascia)
I/906056  Black opaque test cuvette
I/027023  Thermocouple Assembly
PFP7/NVGTA  Needle Valve Gas Tubing Assembly
73SER/EMA  Entrance Mirror Assembly
680140  Tungsten Halogen lamp for Model 6800 Spectrophotometer
PFP7/MPSA  Mains Power Socket Assembly
PFP7/VSA  Voltage Selector Assembly
I/500194  Cleaning wire (3 x 150mm length)
60360  Anti-Seize Paste
PFP7/EIUA  Electrical Ignition Unit Assembly
PFP7/FKIT  Fuse Kit
PFP7/APSA  Auxiliary Power Socket Assembly
PFP7/FA  Foot Assembly
60141  Small Foam Square
73VIS/EMA  Entrance Mirror Assembly
16017  Fuse Holder
M7817UK  Extension cable for the 73 series power supply pack with UK connector
500154  Opto Cable
630105  Grating Assembly Bushing
730137  Polymide Frame
961782  7300 Personalise Label
961783  7305 Personalise Label
961785  7315 Personalise Label
961787  Genova Plus Personalise Label
961788  Genova Nano Personalise Label
73SER/DBA  Detector Block Assembly
73SER/CMA  Collimeter Mirror Assembly
I/500604  Filter Wheel Assembly (PFP7)
I/500706  Chimney Assembly
680133  Deuterium Lamp for Model 6800 Spectrophotometer
73VIS/SA  VIS Solenoid Assembly
I/500046  Mixing Chamber Assembly
PFP7/DPA  Display PCB Assembly (PFP7)
73SER/GA  Grating Assembly
PFP7/DPAC  Display PCB (PFP7C)
7300/MPCBA  Main PCB Assembly
7310/MPCBA  Main PCB Assembly
7315/MPCBA  Main PCB Assembly
7305/MPCBA  Main PCB Assembly
73GEN/MPCBA  Main PCB Assembly
I/730545  Lamp Module Cole-Parmer - Jenway Xenon, for Models 7305, 7315, Genova Plus and Genova Nano
PFP7/MAJKIT  Major Spares Kit (PFP7)
PFP7/MAJKITC  Major Spares Kit (PFP7C)
27910  Glass High conductivity probe K = 0.55 (7 pin DIN) (for use with 4510, 4520 and 3540)
JEN001-CARR01  Carriage Cole-Parmer - Jenway
35265  Additional TrayCell cap for 2mm path length
35266  Additional TrayCell cap for 0.1mm path length
9146  BNC shorting plug
27525  2M Extension Cable for conductivity probes with 7 pin DIN connector. Connects to 7 pin DIN on conductivity meter.
27550  4M Extension Cable for conductivity probes with 7 pin DIN connector. Connects to 7 pin DIN on conductivity meter.
27600  5M Extension Cable for conductivity probes with 7 pin DIN connector. Connects to 7 pin DIN on conductivity meter.
35094  DNACON Solution in sealed 10x10mm cuvette, for the Genova Bio Life Science spectrophotometer
35300  Paired glass cuvettes x 4
35400  Paired quartz cuvettes x 2
570401  White silicone case for 570 portable pH meter
570402  Blue silicone case for 570 portable pH meter
627197  Wavelength 214nm
660802  67 Series sample chamber with 10 x 10mm cuvette holder fitted
685061  Solid sample holder/glass filter holder
720304  Micro-cuvette holder with reduced aperture for 63, 72, 73 and 67 series spectrophotometers. For cuvettes with 8mm beam height e.g. Eppendorf Uvette
924067  Replacement pH electrode with S7 connector for use with Model 430
924601  1M Extension Cable for pH electrodes with BNC connector. Connects to BNC port on pH meter.
924602  2M Extension Cable for pH electrodes with BNC connector. Connects to BNC port on pH meter.
925604  4M Extension Cable for pH electrodes with BNC connector. Connects to BNC port on pH meter.
925605  5M Extension Cable for pH electrodes with BNC connector. Connects to BNC port on pH meter.
961784  7310 Personalise Label
607-167  Spare power supply for the 10 x 10 heated cell (725201)
72CASE  Wheeled carry case with extendable handles for 72 series spectrophotometers
IQ/OQ-6850/230V  IQ/OQ documentation only for 6850 spectrophotometer 230V
M7980  Power supply unit for 72 series spectrophotometer
741001  Spectrophotometer Jenway 7410 Visible
741501  Spectrophotometer Jenway 7415 UV/Visible
747501  Spectrophotometer Jenway 7415 Nano Micro-volume
740017  Dust cover Jenway

  • Product update

    Introduction
    Cole-Parmer - Jenway 3510 pH meter from Wolflabs. The 3510 is a versatile, simple to use pH, mV and temperature meter that is ideal for routine analysis. With up to three decimal place resolution and a choice of up to three calibration points the 3510 provides the user with added flexibility where future demands for enhanced performance may be required. A choice of pH calibration buffers to DIN, JIS and NIST standards can be used for automatic calibration, as well as manually entered buffer values.

    Features and benefits
    - Simultaneous readout of pH and temperature
    - pH resolution to 3 decimal places
    - 1, 2 or 3 point calibration
    - Automatic or manual buffer selection
    - Storage of up to 32 results
    - RS232 connection to printer or PC via DataWay

    Product category Manufacturer Wolf Staff Date
    pH and Conductivity Meters Cole-Parmer - Jenway David Suddaby 10-Mar-2018

  • Product update

    Introduction
    Cole-Parmer - Jenway 72 series of spectrophotmeters from Wolflabs. The 72 series spectrophotometers are the first scanning spectrophotometers in the Jenway range to leverage diode array technology to produce exceptionally fast results. The range includes two models: model 7200 covers a wavelength range of 335 to 800nm with a spectral bandwidth of 7nm and model 7205 covers a wavelength range of 198 to 800nm with a spectral bandwidth of 5nm.

    Features and benefits
    - Scanning diode array technology
    - Colour touchscreen navigation
    - Small footprint and lightweight
    - Fast scan speed
    - English, French and German language options
    - Multiple USB ports for data storage and printer connectivity
    - Extensive range of accessories available
    - 2 year warranty

    Product category Manufacturer Wolf Staff Date
    Spectrophotometers Cole-Parmer - Jenway David Suddaby 10-Feb-2018

  • Special offers

    Prices starting at £1158  - https://www.wolflabs.co.uk/laboratory-products/spectrophotometers 

    Product category Manufacturer Wolf Staff Date
    Spectrophotometers Cole-Parmer - Jenway David Child 29-Jan-2018

  • Special offers

    Discounts of almost 30% - https://www.wolflabs.co.uk/laboratory-products/flame-photometers

    Product category Manufacturer Wolf Staff Date
    Flame Photometers Cole-Parmer - Jenway David Child 03-Jan-2018

  • Product update

    Introduction
    Cole-Parmer - Jenway 570 pH meter from Wolflabs. Model 570 is a general purpose hand held pH, mV and temperature meter. This model offers 2 point calibration and automatic buffer recognition. The unit simultaneously displays either temperature compensated pH readings or electrode potential and temperature. This model has a large easy to read LCD display housed in a robust, ergonomically designed case. An indicator of battery life is also permanently shown on the display with an automatic switch off facility to help conserve battery life. The integrated rubber seal ensures that the unit is completely waterproof.

    Features and benefits
    - Simultaneously displays pH or mV and temperature
    - Automatic calibration
    - Manual or Automatic Temperature Compensation (ATC)
    - Auto shut off 10 minutes
    - 2500 hours battery life
    - Waterproof housing
    - 2 year warranty

    Product category Manufacturer Wolf Staff Date
    pH and Conductivity Meters Cole-Parmer - Jenway David Suddaby 01-Dec-2017

Archived product specifications

The following information relates to archived product specifications. To see current content and products from this manufacturer, please look in the Products from this manufacturer tab.

Tray Cell for ultra-micro sample volumes from 0.7 to 5 microlitres compatible with Genova, 6705 and 6715 spectrophotometers, supplied complete with caps for 1mm and 0.2mm pathlength operation

 

• Ideal for DNA, RNA and protein measurements
• Sample volumes as low as 0.7µl
• Sample concentration range from 25 to 4250µg/ml
• Sample is simply wiped away after the measurements, making the TrayCell quick and easy to use
• Prevents dilution and pipetting errors
• Fits all standard 10 x 10mm cuvette holders

The TrayCell is a fibre optic cuvette which can be used with as little as 0.7µl of sample. The cuvette has two caps which give path lengths of either 1mm or 0.2mm, thus creating a "virtual
dilution" of 1:10 or 1:50 of the sample when compared to a measurement with a standard 10 mm cuvette.
 


Technical Specification

 

Parameter TrayCell
Light Path 0.2mm or 1mm
Error of light path ± 0.02mm
Volume 0.7–5µl
Wavelength range 190 to 1100nm
Maximum temperature 50°C

 

 


Ordering Information

 

Part Code Description
035 262 Tray Cell for ultra–micro sample volumes from 0.7 to 5µl compatible with Genova, 6705 and 6715 spectrophotometers, supplied complete with caps for 1mm and 0.2mm path length operation
035 263 Replacement 1mm path length cap for TrayCell
035 264 Replacement 0.2mm path length cap for TrayCell

 


Disposable Cuvettes and Test Tubes
 

Part Code Description
060 084 Pack of 100 plastic cuvettes, visible wavelengths only, 2.4 to 4.5ml fill volume
060 229 Pack of 500 plastic cuvettes (5 boxes of 060 084)
060 087 Pack of 100 plastic cuvettes, visible wavelengths only, 1.5 to 3.0ml fill volume
060 230 Pack of 100 plastic cuvettes, UV and visible wavelengths, 2.5 to 4.5ml fill volume
060 232 Pack of 500 plastic cuvettes (5 boxes of 060 230)
060 231 Pack of 100 UV plastic cuvettes, 1.5 to 3.0ml fill volume
035 143 Pack of 100 plastic cuvettes, UV and visible wavelengths, 70µl to 1.5ml fill volume (use with micro cuvette holder)
060 331 Pack of 100 glass test tubes (12 x 75mm)
060 179 Pack of 100 plastic test tubes (12 x 75mm)
060 335 Pack of 50 glass test tubes (24 x 150mm)


 

Glass and Quartz Cuvettes
 

Part Code Description
035 027 Visible (glass) 10mm path length cuvette
035 086 Visible (glass) 20mm path length cuvette
035 029 Visible (glass) 40mm path length cuvette
035 087 Visible (glass) 50mm path length cuvette
035 079 Visible (glass) 100mm path length cuvette
035 123 Visible (glass) micro (500µl) cuvette
035 126 Visible (glass) semi-micro (1ml) cuvette
035 028 UV (quartz) cuvette (2.0 to 3.5ml)
035 124 UV (quartz) ultra micro (50µl) cuvette
035 125 UV (quartz) micro (500µl) cuvette
035 127 UV (quartz) semi-micro (1ml) cuvette
035 138 UV (quartz) ultra-micro (100µl) cuvette
035 139 UV (quartz) ultra-micro (200µl) cuvette
035 249 UV (quartz) ultra-micro (20µl) cuvette

 


Flow Cells
 

Part Code Description
035 026 Pour in/Suck out cell
035 025 Visible (glass) flow-through cell 1.8ml
035 045 Visible (glass) flow-through cell 80µl
035 044 UV (quartz) flow-through cell 1.8ml
035 047 UV (quartz) flow-through cell 80µl

 

Spectrophotometers - Jenway

 

?67 Series Spectrophotometers

• Colour touch screen display
• High quality, sealed split beam optics for optimum photometric performance
• Secure multi-user operation
• Save to SD memory cards
• Enhanced productivity
• Extensive range of accessories for flexibility and improve productivity

There are three models in the 67 series - Model 6700 covers the visible range of the spectrum and has a 4nm bandwidth; Models 6705 and 6715 cover the UV/visible range of the spectrum and have a 4nm and 1.5nm bandwidth respectively. All three instruments have modes for photometrics, spectrum scanning, multi-wavelength analysis, kinetics and quantitation, giving direct concentration results against single or multi-point calibrations. With extensive post measurement tools to ensure results are presented exactly to each users requirements the 67 series spectrophotometers also offer significant advances in data portability.

Together, the touch screen and colour display give the fastest, most flexible instrument interface possible. Where fine cursor control is required, using the QWheel™ makes the task easy and precise.

Jenway have developed Secure Multi User Operation for when instruments are shared by a number of users, so access to the instrument functions is controlled through a secure log-in procedure. For maximum security PIN codes can be allocated to individuals, groups or departments and to further increase flexibility each method can be given three levels of security:

• Public access is free to all users.
• Read only methods can be accessed by all users, but only modified by the originator.
• Personal method can only be accessed by the logged in user

The high capacity internal memory of the 67 series enables over 500 methods and results to be stored. Removable SD cards further increases the flexibility and data transfer and enables the direct transfer of results to a PC via a USB port. Here all data can be viewed, exported, saved or printed for generating reports and standard operating procedures. Copying the SD card to the instrument's internal memory enables the easy cloning of multiple instruments, ensuring common laboratory practice and speeding set-up in busy teaching establishments.

QWheel is a registered trademark of Quantum Research.

Technical Information

Model 6700, 6705 and 6715
Wavelength range 320 to 1100nm (6700), 190 to 1100nm (6705, 6715)
Wavelength resolution 0.1nm
Wavelength accuracy ±1.0nm
Wavelength repeatability ±0.2nm
Spectral bandwidth 4nm (6700, 6705), 1.5nm (6715)
Transmittance 0 to 199.9%T
Absorbance –0.300 to 3.000A
Accuracy ±0.005A at 1.0A
Resolution 0.1%T, 0.001A
Stray light <0.1%T at 340nm (6700), <0.05% at 220nm (6705, 6715)
Noise <0.001 at 0A, <0.002 at 2A at 340nm
Stability <0.001A/h after warm–up
Quantitation range –99999 to +99999
Quantitation resolution Selectable 1, 0.1, 0.01 or 0.001
Calibration Up to 20 with 5 replicates of each
Units mEq/l, ppm, mg/l, g/l, %, µg/ml, mg/ml, g/dl, mg/dl, µg/l, ng/l, µg/dl, M, mM, µM, U/l, mU/l, U/ml, blank
Curve fit algorithms Linear, quadratic and cubic functions
Multi–wavelength Up to 4 wavelengths
Calculations Ratio, difference, formulae with factors
Kinetics time limits 0 to 9999 seconds
Calibration Standard or factor
Analysis Curve details with mean rate of change plus formula of line of best fit
Spectrum range Any range between 320 (6700) or 190 (6705, 6715) and 1100nm
Scan speed 1500nm/min
Scan interval 0.1nm
Analysis Auto peaks and valleys, zoom, addition, subtraction, peak ratios, smoothing, area under curve, wavelength table, derivatives, analysis points, overlay
Light source Tungsten halogen lamp (6700), Xenon lamp (6705, 6715)
Configuration Secure multi–user and free access
Number of users 10 users + supervisor
Methods/results memory >1000 on internal flash memory or removable media
Removable media MM/SD memory card or SD/USB memory card
Outputs USB, Centronics, Analogue
Size (w x d x h) 490 x 390 x 220mm
Weight 7.5kg

Spectrophotometers - Jenway

 




 

 

 

 

 

 

 

 

Genova Plus Life Science Spectrophotometer

• 5nm spectral bandwidth
• Absorbance range -0.3 to 2.5A
• Pre-programmed for DNA/RNA analysis
• Purity scan across entire wavelength range
• Pre-programmed methods for protein analysis 
• Standard spectrophotometer functions
• Press to read xenon lamp
• Icon driven software
• Small footprint
• Method and result saving to USB memory stick 
• 3 year warranty including xenon lamp
 

The new Genova Plus is a UV/visible spectrophotometer dedicated to life science analysis. This spectrophotometer allows the measurement of DNA concentrations and purity ratios using wavelengths recorded at 260, 280 and 230nm, with an optional correction at 320nm. The Genova Plus is pre-programmed with Bradford, Lowry, Biuret, BCA and Direct UV methods for protein analysis. The Genova Plus has an OD measurement mode enabling cell growth to be monitored by measuring absorbance at 600nm, 595nm or any other user selected wavelength. The purity scan across the entire wavelength range from 198 to 1000nm displays any distorted peaks enabling impurities to be easily identified. 

This life science spectrophotometer uses icon driven software and has an improved navigation system for easy and intuitive usability. As well as the dedicated life science measurement modes this instrument can also be used as a standard spectrophotometer with measurement modes for photometrics, concentration, multi-wavelength, spectrum scanning, quantitation and kinetics.
 

Technical Information

Model Genova
Parameter Genova Plus
Wavelength Range 198 to 1000nm
Light source Xenon lamp
Wavelength Resolution 1nm
Wavelength Accuracy ± 2nm
Wavelength Repeatibility ± 0.5nm
Spectral bandwidth 5nm
Photometric Transmittance 0 to 199.9%
Photometric Absorbance - 0.300 to 2.500
Photometric Accuracy* ± 1%T, ± 0.01Abs at 1.000 Absorbance
Photometric Resolution 0.1%T, 0.001A
Concentration/Quantitation Range 0 to 9999
Concentation Calibration Blank with a single standard or factor
Quantitation Calibration Blank with up to 12 standards
Quantitation Curve fit algorithms Quadratic, quadratic through zero, linear, linear through zero, interpolate
Kinetics Measurement time 2 to 9999 seconds
Kinetics Calibration Blank with a single standard or factor
Kinetics Display Graphical and concentration
Kinetics Analysis Concentration, rate of change, initial and final absorbance/ %T
Spectrum/Purity Range 198 to 1000nm
Scan interval selec table 1, 2 or 5nm
Spectrum/Purity Analysis Absorbance or transmittance and peak and valleys
Multi-wavelength Data Points Up to 4 wavelengths
Multi-wavelength Calculations Sum, product, ratio and difference
DNA Measurement Modes dsDNA, ssDNA, RNA, Oligonucleotides, 260/ 280, 260/ 230, Variable ratio
Multi-wavelength Plus Data Points Up to 3 wavelengths plus optional reference wavelength
Multi-wavelength Plus Calculations Concentration and ratio
Protein Measurement Modes BCA, Bradford, Lowry, Biuret, Direct UV
OD 600 Range 0.00 E- 19 to 9.99 E+ 19
OD 600 Calibration Blank with a single standard or factor
GLP Support Current time and date, user ID, instrument lock and method lock
Method storage 312 (including pre-programmed methods)
Results memory Limited by attached mass storage device
Removable media USB (supplied)
Outputs USB, Analogue, RS232, Integral printer
Size (w x d x h) 275 x 400 x 220mm
Weight 6kg

Visible Light Spectrophotometers

Anadeo Features

 
  • Easy to use keypad.
  • Compact and lightweight.
  • Choice of 3 models.
  • Excellent optical performances.
  • 50 programmable memories.
  • Large clear LCD and intuitive Navigation system.

 

Anadeo 1

Absorbance, transmittance and calculation of concentration by linear regression using known factor or 1 standard.

Anadeo Plus

Includes all the features of the Anadeo 1, plus the following methods of measurement:

Concentration

  • Use of factor or up to 8 standards
  • Display of the factor and intercept

Kinetics

  • Initial delay, time and number intervals
  • Display of the average and intermediate interval slopes
  • Calculation of activity

Multi-wavelengths

  • Display of absorbances, ratio and difference (delta) of absorbance

Anadeo Clinical

Same features as Anadeo Plus but includes a 37°C thermostatic chamber and aspiration system for clinical applications.

Anadeo Range - Technical Specification & Ordering Information

MODEL

Anadeo 1

Anadeo Plus

Anadeo Clinical

Spectral Range

330 to 900 nm

330 to 900 nm

330 to 900 nm

Absorbance

Yes

Yes

Yes

Transmittance

Yes

Yes

Yes

Concentration

Yes

Yes

Yes

Factors / Standards

1 factor/1 standard

1 factor/1 to 8 standards

1 factor/1 to 8 standards

Kinetics (initial delay, interval time, number of intervals, activity calculation)

Yes

Yes

Yes

Multi-wavelengths (ratio and delta)

-

Yes

Yes

Thermostated chamber at 37°C

-

-

Yes

Programmable Aspiration System

-

-

Yes

Cuvette Holder

1 x 10 mm cuvette holder

Bandpass

< 10 mm

Accuracy

± 1.5 NM

Repeatability

± 1 NM

Photometric range

-0.3 to 2.500 Abs, 0.3 to 200% T

Accuracy

± 2%

Drift

< 0.003 A/h at 500 NM

Stray light

0.5% at 340 and 400 NM

Display

Alphanumerical, back-lit LCD, 8 mm digits, 2 lines 16 characters

Zero

Automatic

Programmable memories

50 methods with parameters

Light source

Tungsten-halogen lamp

Monochromator

Protected grating Jobin Yvon®

Detector

Silicon diode

Output

Serial RS232C 9 pins

Power

230V/60Hz

Dimensions (w x d x h)

180 x 280 x 220 mm

Weight

2.5Kg

5.2Kg

6Kg

Ordering Information

ANADEO1

ANADEO2

ANADEO3

Each Anadeo unit is delivered complete with: 100 Sterilin plastic cuvettes, 1 power transformer, 1 user manual.

Spares

Description Product Number Pack Quantity
Tungsten Halogen Lamp ANA034 1
Printer Ribbons ANA6931 2
Printer Paper Rolls ANA6928 5

Optional Accessories

Each accessory snaps into place quickly and easily using our unique clip system for which no tools are necessary.

Description Product Number Pack Quantity
Sterilin® Disposable Cuvettes 221M 5 x 100
Holder for two cuvettes, 10mm * ANA385 1
Test-Tube Block, 16mm ANA384 1
Adapter, 12V, for car lighter SM27/3 1
Thermic Printer ANA6910 1
 

6500 & 6505 Spectrophotometers

High performance split beam optics

 

1.8nm bandwidth

 

Spectral addition and subtraction

 

1st-4th derivative and post scan analysis

 

Method and results storage

 

Application and data storage cards

 

The 6500 series are multi-capability scanning spectrophotometers designed to provide the user with a high quality system which offers all the features required by a scientist to manipulate and process spectral information.
The Model 6500 Visible range unit operates at 320-1100nm.
The Model 6505 UV/Visible range unit operates at 190-1100nm.

Features include:
A customised LCD
 gives a clear readout of calibration data, sample data and all set-up options.

Simple keypad layout and operating protocols facilitates the setting of experimental parameters and initiating sample analysis procedures.

Graphical user interface (GUI) allows interactive control of all operating parameters. Both keypad and mouse operation are fully supported.

Multi-language capability allows screen instructions to be presented in a choice of English, French, German, Italian, Portuguese and Spanish.

Five operating ranges are available - photometrics, spectrum, kinetics, multi-wavelength and quantitation.
Full kinetics capability allows, usually in conjunction with the peltier cell block, full analysis of timed reactions

Calibration curves producing non-linear results can also be accommodated using in-built software. Up to twenty data points (standards), or up to seven when using the multi-cell changer, can be determined automatically and used to construct a calibration curve. A variety of statistical methods are available to ensure a close correlation to all curve shapes.

Full scanning capability allows scan range, speed and resolution to be user adjusted and the resultant scan to be auto scaled for enhanced visibility. Peaks and valleys are labelled with wavelength and absorbance values and can be readily down loaded to the optional internal printer, to a PC or a Centronics printer. A cursor facility allows the user to interrogate specific parts of the scanned data

An integral printer module is available and can be supplied as a factory fitted item at the time of ordering the product or as a customer installable module.

Full interfacing capability using RS232 interfacing or an analogue output is provided as standard. Utilising the RS232 facility allows results to be down loaded via the front panel print key.
Both models incorporate a bi-directional interface allowing remote operation, calibration and interrogation by an external computer.

An automatic results log allows readings to be stored in a data file either when the print key is pressed; at a user defined set time interval or by a multiple sample assay using the 8 position cell holder. Data files have a user entered ID and can be saved in internal memory or to an external data card. Results saved in internal memory can be transferred to an external data card.

Method storage allows all user set parameters to be saved against a user identification. A method can be subsequently recalled which configures the instrument to the saved parameters. The instrument settings for a recalled method can be altered and subsequently saved against the same or a different method identification. Methods can be saved in internal memory or to an external memory card. Methods saved in internal memory can be transferred to an external data card. The instruments memory has the capacity to store a minimum of fifty methods.

Traceable calibration standards provide the on-going assurance of accuracy required by Good Laboratory Practice (G.L.P.). A user set identification number (up to 20 digits in length) is entered and will be shown on any printouts produced by the instrument. In addition, each printout will show sample number, reading, unit of measurement, the wavelength analysis and the current time and date. Scans and concentration curves stored will also be time and date stamped. The 6500 series complies fully with EEC and US directives relating to ESD/EMC emission and susceptibility

6400 & 6405 Spectrophotometers

 

Single beam scanning

 

5nm bandwidth

 

Multi-wavelength and kinetics analysis

 

Wide range of sampling accessories

 

Full interfacing capability

 

Optional 8 position multi-cell changer (quantitation measurement)

 
 

The 6400 series incorporate a wide range of features designed to satisfy the needs of users seeking to maximise the efficiency of routine and specialised UV and visible spectroscopy tasks.
The Model 6400 Visible range unit operates at 320-1100nm.
The Model 6405 UV/Visible range unit operates at 190-1100nm.

Features include:

A customised LCD gives a clear readout of calibration data, sample data and all set-up options.

Simple keypad layout and operating protocols facilitates the setting of experimental parameters and initiating sample analysis procedures.

Multi-language capability allows screen instructions to be presented in a choice of English, French, German, Italian, Portuguese and Spanish.

Five operating ranges are available - photometrics, spectrum, kinetics, multi-wavelength and quantitation.
Full kinetics capability allows , usually in conjunction with the peltier cell block, full analysis of timed reactions

Calibration curves producing non-linear results can also be accommodated using in-built software and the multi-cell changer. Up to seven data points can be determined automatically and used to construct a calibration curve. A variety of statistical methods are available to ensure a close correlation to all curve shapes.

Full scanning capability allows scan range, speed and resolution to be user adjusted and the resultant scan to be auto scaled for enhanced visibility. Peaks and valleys are labelled with wavelength and absorbance values and can be readily down loaded to the optional internal printer, to a PC or a Centronics printer.

Sample presentation flexibility is a key feature, with cells from 100mm path length down to micro sample capacity being readily accommodated.

An integral printer module is available and can be supplied as a factory fitted item at the time of ordering the product or as a customer installable module.

Full interfacing capability using RS232 interfacing or an analogue output is provided as standard. Utilising the RS232 facility allows results to be down loaded via the front panel print key.
Both models incorporate a bi-directional interface allowing remote operation, calibration and interrogation by an external computer.

Traceable calibration standards provide the on-going assurance of accuracy required by Good Laboratory Practice (G.L.P.). A user set identification number (up to 6 digits in length) is entered and will be shown on any printouts produced by the instrument. In addition, each printout will show sample number, reading, unit of measurement, the wavelength analysis and the current time and date. Scans and concentration curves stored will also be time and date stamped. The 6400 series complies fully with EEC and US directives relating to ESD/EMC emission and susceptibility.

Spectrophotometers - Jenway

 

?New 7310 and 7315 Spectrophotometers 

• Icon driven software
• Results and method saving to USB memory stick
• Autologging capabilities
• Press to read xenon lamp (7315)
• 3 year warranty including xenon lamp 
• Extensive range of accessories available

The 73 series introduces four new spectrophotometers to the extensive Jenway range. These spectrophotometers use icon driven software and have an improved navigation system for easy and intuitive usability. The range includes two basic models, 7300 and 7305 and two advanced models, 7310 and 7315. The 7310 and 7315 feature measurement modes for absorbance, % transmittance, concentration, spectrum scanning, kinetics and quantitation.

The advanced models have the additional feature of an easy access USB port on the front of the unit which enables results to be stored directly to a USB memory stick for easy transfer of data. These models can also store up to 240 methods which can be copied from one unit to another using the USB capability.

The 7310 and 7315 models have enhanced security features enabling the settings and methods to be locked preventing unauthorised changes to the instrument settings and method parameters. The home page can also be customised and selected modes restricted, which is ideal for teaching laboratories. 

The 73 series spectrophotometers are all covered by a three year warranty which includes the xenon lamp.

Technical Information

Model 7310 7315
Wavelength Range 320 to 1000nm 198 to 1000nm
Light source Tungsten halogen lamp Xenon lamp
Resolution 1nm 1nm
Accuracy ± 2nm ± 2nm
Repeatibility ± 0.5nm ± 0.5nm
Spectral bandwidth 5nm 5nm
Photometric Transmittance 0 to 199.9% 0 to 199.9%
Photometric Absorbance -0.300 to 2.500 -0.300 to 2.500
Photometric Accuracy ± 1%T, ± 0.01Abs at 1.000 Absorbance ± 1%T, ± 0.01Abs at 1.000 Absorbance
Photometric Resolution 0.1%T, 0.001A 0.1%T, 0.001A
Concentration Range -300 to 9999 -300 to 9999
Concentration Resolution selec table 1/ 0.1/ 0.01/ 0.001 selec table 1/ 0.1/ 0.01/ 0.001
Concentation Calibration Blank with a single standard or factor Blank with a single standard or factor
Concentration Units no units, %, ppm, EBC, SRM, mEq/l, mEq, M, mM, µM, nM, U, U/l, U/ml, g/l, mg/l, µg/l, ng/l, g/dl, mg/dl, µg/dl, mg/ml, µg/ml, ng/ml, µg/ul, ng/ul, mol/l, mmol/l no units, %, ppm, EBC, SRM, mEq/l, mEq, M, mM, µM, nM, U, U/l, U/ml, g/l, mg/l, µg/l, ng/l, g/dl, mg/dl, µg/dl, mg/ml, µg/ml, ng/ml, µg/ul, ng/ul, mol/l, mmol/l
Concentration Factor 0.001 to 10000 0.001 to 10000
Concentration Standard 0.001 to 1000 0.001 to 1000
Quantitation Range -300 to 9999 -300 to 9999
Quantitation Resolution selec table 1/ 0.1/ 0.01/ 0.001 selec table 1/ 0.1/ 0.01/ 0.001
Quantitation Calibration Blank with up to 6 standards Blank with up to 6 standards
Quantitation Curve fit algorithms Quadratic, quadratic through zero, linear, linear through zero, interpolate Quadratic, quadratic through zero, linear, linear through zero, interpolate
Kinetics Measurement time 2 to 9999 seconds 2 to 9999 seconds
Kinetics Calibration Blank with a single standard or factor Blank with a single standard or factor
Kinetics Display Graphical and concentration Graphical and concentration
Kinetics Analysis Concentration, rate of change, initial and final absorbance/%T Concentration, rate of change, initial and final absorbance/:%T
Kinetics Resolution selec table 1/ 0.1/ 0.01/ 0.001 selec table 1/ 0.1/ 0.01/ 0.001
Spectrum Range 320 to 1000nm 198 to 1000nm
Spectrum Scan interval selec table 1, 2 or 5nm selec table 1, 2 or 5nm
Spectrum Analysis Absorbance or transmittance and peak and valleys Absorbance or transmittance and peak and valleys
GLP Current time and date, user ID, instrument lock and method lock Current time and date, user ID, instrument lock and method lock
Method storage 240 240
Results memory Limited by attached mass storage device Limited by attached mass storage device
Removable media USB (supplied) USB (supplied)
Outputs USB, Analogue, RS232, Integral printer USB, Analogue, RS232, Integral printer
Size (w x d x h) 275 x 400 x 220mm 275 x 400 x 220mm
Weight 6kg 6kg
 

Spectrophotometers - Jenway

 

 

?New 7300 and 7305 Spectrophotometers 

• Icon driven software
• Small footprint
• Autologging capabilities 
• Press to read xenon lamp (7305) 
• Extensive range of accessories available

The 73 series introduces four new spectrophotometers to the extensive Jenway range. These spectrophotometers use icon driven software and have an improved navigation system for easy and intuitive usability. The range includes two basic models, 7300 and 7305 and two advanced models, 7310 and 7315. The 7300 and 7305 feature measurement modes for absorbance, % transmittance and concentration. 

All of the models in the 73 series range are covered by a three year warranty which includes the xenon lamp. These spectrophotometers are easy to use and ideal for use in education and general QC laboratories.

Technical Information

Model 7300 7305
Wavelength Range 320 to 1000nm 198 to 1000nm
Light source Tungsten halogen lamp Xenon lamp
Resolution 1nm 1nm
Accuracy ± 2nm ± 2nm
Repeatibility ± 0.5nm ± 0.5nm
Spectral bandwidth 5nm 5nm
Photometric Transmittance 0 to 199.9% 0 to 199.9%
Photometric Absorbance -0.300 to 2.500 -0.300 to 2.500
Photometric Accuracy ± 1%T, ± 0.01Abs at 1.000 Absorbance ± 1%T, ± 0.01Abs at 1.000 Absorbance
Photometric Resolution 0.1%T, 0.001A 0.1%T, 0.001A
Concentration Range -300 to 9999 -300 to 9999
Concentration Resolution Selectable 1/0.1/0.01/0.001 Selectable 1/0.1/0.01/0.001
Concentation Calibration Blank with a single standard or factor Blank with a single standard or factor
Concentration Units no units, %, ppm, EBC, SRM, mEq/l, mEq, M, mM, µM, nM, U, U/l, U/ml, g/l, mg/l, µg/l, ng/l, g/dl, mg/dl, µg/dl, mg/ml, µg/ml, ng/ml, µg/ul, ng/ul, mol/l, mmol/l no units, %, ppm, EBC, SRM, mEq/l, mEq, M, mM, µM, nM, U, U/l, U/ml, g/l, mg/l, µg/l, ng/l, g/dl, mg/dl, µg/dl, mg/ml, µg/ml, ng/ml, µg/ul, ng/ul, mol/l, mmol/l
Concentration Factor 0.001 to 10000 0.001 to 10000
Concentration Standard 0.001 to 1000 0.001 to 1000
Outputs Analogue, RS232, Integral printer Analogue, RS232, Integral printer
Size (w x d x h) 275 x 400 x 220mm 275 x 400 x 220mm
Weight 6kg 6kg
 

Spectrophotometers - Jenway

 

 

?6300 and 6320D Visible UV/Vis Spectrophotometers

• Wavelength range of 320 to 1000nm (6300 and 6320D)
• Absorbance, %T and concentration modes
• Multi-parameter display with wavelength and photometric readouts
• Wide range of sampling accessories
• Domed lid of 6320D accepts tubes up to 105mm tall
• 6305 utilises a high quality pulsed xenon lamp
• Wide range of sampling accessories

The 6300 is high quality, low cost unit for spectrophotometric applications in schools and colleges, as well as in QC and testing procedures for a wide variety of services and industries. The 6320D is based on the 6300 platform and includes a domed lid which accepts taller tubes up to a height of 105mm.

Technical Information

Model 6300 and 6320D
Wavelength range 320 to 1000nm
Wavelength resolution 1nm
Wavelength accuracy ±2nm
Spectral bandwidth 8nm
Transmittance 0 to 199.9%T
Absorbance –0.300 to 1.999A
Accuracy ±1%T
Resolution 0.1%T, 0.001A
Stray light <0.5%T
Noise <1%
Stability 1%/h after 15 minutes
Concentration range –300 to 1999
Concentration resolution 0.1 to 1
Units ppm, mg/l, g/l, M, %, blank
Factor 0 to 199.9, 1000 to 9999
Light source Tungsten halogen lamp
Outputs Analogue and RS232
Power <50W
Size (w x d x h) 365 x 272 x 160mm
Weight 6kg
 

Models S-20 Vis & S-22 UV/Vis

 

Model S-20 Vis  Code / Description Model S-22 UV/Vis  Code / Description
BOE 8630501  230V
BOE 8630531 110V
Spectrophotometer, with pack 100 10x10mm plastic cuvettes, mains lead, 10x10 cell holder & manual BOE 8630501 230V
BOE 8630531 110V
Spectrophotometer, with pack 100 10x10mm plastic cuvettes, mains lead, 10x10 cell holder & manual
Wavelength ranges:
  320 - 1000 nm (S-20)
198 - 1000 nm (S-22)
  Bandwidths:
  8 nm (S-20)
6 nm (S-22)
  In-built wavelength calibration
  Automatic O%T setting during all calibration routines
  Dual display - wavelength & photometric result
  Full interfacing capability
  (bi-directional RS 232 interface)
  Versatile sampling system
  Simple operation
  Ideal for Routine Analysis
  First quality at affordable prices
  Manufactured under ISO 9000 norms
  CE mark for electromagnetic compatibility
 
The BOECO Model S-22 has a unique xenon lamp
which has the advantage of offering a broad spectral
source with extended life. This enables the running
costs for the S-22 to be minimised over the lifetime of
the spectrophotometer, since there are no deuterium
and tungsten lamps to replace.
 
  Single lamp with guaranteed 3 year life time
  Self calibrating lamp at 3 wavelengths
  10 times more UV light energy
  Blazed holographic grating
 

Anadeo Range

 

Easy to use keypad.
Compact and lightweight.
Choice of 3 models.
Excellent optical performances.
50 programmable memories.
Large clear LCD and intuitive Navigation system.

Anadeo 1

Absorbance, transmittance and calculation of concentration by linear regression using known factor or 1 standard.

Anadeo Plus

Includes all the features of the Anadeo 1, plus the following methods of measurement:

Concentration
Use of factor or up to 8 standards
Display of the factor and intercept

Kinetics
Initial delay, time and number intervals
Display of the average and intermediate interval slopes
Calculation of activity

Multi-wavelengths
Display of absorbances, ratio and difference (delta) of absorbance

Anadeo Clinical

Same features as Anadeo Plus but includes a 37°C thermostatic chamber and aspiration system for clinical applications.

Anadeo Range - Technical Specification & Ordering Information

MODEL

Anadeo 1

Anadeo Plus

Anadeo Clinical

Spectral Range

330 to 900 nm

330 to 900 nm

330 to 900 nm

Absorbance

Yes

Yes

Yes

Transmittance

Yes

Yes

Yes

Concentration

Yes

Yes

Yes

Factors / Standards

1 factor/1 standard

1 factor/1 to 8 standards

1 factor/1 to 8 standards

Kinetics (initial delay, interval time, number of intervals, activity calculation)

Yes

Yes

Yes

Multi-wavelengths (ratio and delta)

-

Yes

Yes

Thermostated chamber at 37°C

-

-

Yes

Programmable Aspiration System

-

-

Yes

Cuvette Holder

1 x 10 mm cuvette holder

Bandpass

< 10 mm

Accuracy

± 1.5 NM

Repeatability

± 1 NM

Photometric range

-0.3 to 2.500 Abs, 0.3 to 200% T

Accuracy

± 2%

Drift

< 0.003 A/h at 500 NM

Stray light

0.5% at 340 and 400 NM

Display

Alphanumerical, back-lit LCD, 8 mm digits, 2 lines 16 characters

Zero

Automatic

Programmable memories

50 methods with parameters

Light source

Tungsten-halogen lamp

Monochromator

Protected grating Jobin Yvon®

Detector

Silicon diode

Output

Serial RS232C 9 pins

Power

230V/60Hz

Dimensions (w x d x h)

180 x 280 x 220 mm

Weight

2.5Kg

5.2Kg

6Kg

Ordering Information

ANADEO1

ANADEO2

ANADEO3

Each Anadeo unit is delivered complete with: 100 Sterilin plastic cuvettes, 1 power transformer, 1 user manual.

Spares

Description Product Number Pack Quantity
Tungsten Halogen Lamp ANA034 1
Printer Ribbons ANA6931 2
Printer Paper Rolls ANA6928 5

Optional Accessories
Each accessory snaps into place quickly and easily using our unique clip system for which no tools are necessary.

Description Product Number Pack Quantity
Sterilin® Disposable Cuvettes 221M 5 x 100
Holder for two cuvettes, 10mm * ANA385 1
Test-Tube Block, 16mm ANA384 1
Adapter, 12V, for car lighter SM27/3 1
Thermal Printer ANA6910 1

Specifications

  Wavelength     
  S-20 Vis S-22 UV/Vis
Range 320 - 1000 nm  198 - 1000 nm
Resolution 1nm 1nm
Accuracy ± 2 nm ± 2 nm
Bandwith 8 nm 6 nm
 
  Absorbance     
  S-20 Vis S-22 UV/Vis
Range -0.300 to 1.999 A -0.300 to 1.999A
Resolution 0.1 % 0.1 %
Stray Light  <0,5% @ 340 nm <0.5% @ 340 nm
Photometric Accuracy ± 1% ± 1%
 
  Concentration     
  S-20 Vis S-22 UV/Vis
Range -300 to 1999 Concentration -300 to 1999 Concentration
Resolution 0.1 / 1 0.1 / 1
Units  ppm, mg/l, g/l, M, %, blank ppm, mg/l, g/l, M, %, blank
 
  diverses     
  S-20 Vis S-22 UV/Vis
Factor  0 to 999.9, 1000 to 9999 0 to 999.9, 1000 to 9999
Photometric Noise Levels <1% <1%
Photometric Stability 1%/Hour after warm-up 1%/Hour after warm-up
Readout  Custom Liquid Crystal Display Custom Liquid Crystal Display
Outputs  Analog (0 to 1999mV) /
RS232 serial port 
Analog (0 to 1999mV)  /
RS232 serial port
Light Source Tungsten Halogen 20W 12V  Xenon Lamp module
Input Voltage 115/230V AC -20% +10% 115/230V AC -20% +10%
Input Power <50W <50W
Size 365(W)x272(D)x166(H) mm 365(W)x272(D)x166(H) mm
Weight 6 kgs 6 kgs
 

 

Jenway Model 6800 1.5nm Bandwidth Spectrophotometer

 

True Double Beam with highly stable optics
1.5nm spectral bandwidth
Includes Jenway Flight Deck Software
A range of easy to fit accessories

The Jenway Model 6800 is built on a solid foundation of high quality, sealed optics for optimum photometric performance.
The user-friendly Flight Deck software delivers the intuitive operation you have come to expect from Jenway instruments; while the operator-focus ensures this spectrophotometer will meet the demands of your laboratory, today and into the future.


Specification
 

Light Source

Tungsten Halogen and Deuterium

Scan Speed

10 to 3600nm/min

Spectral Bandwidth

1.5nm

Lamp Switchover

370 to 325nm

Wavelength Range

190-1100nm

Wavelength Accuracy

±0.3nm

Wavelength Reproducibility

±0.1nm

Stray Light

<0.05% at 340nm and 220nm

Operating Modes

Photometrics (includes Multiwavelength), Spectrum, Kinetics and Time Scan, Quantitation, DNA/RNA and Protein

Photometric Range

-3.000 to 3.000A

Photometric Accuracy

±0.002A

Photometric Reproducibility

±0.001A

 

 

   

   

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jenway Model 6700, 6705 and 6715 4nm Bandwidth Spectrophotometers

 

Colour (TFT) LCD with touch-screen interface
Sealed QWheelTMcontrol
Removable SD & SD/USB memory card
Plug-in accessory modules
Secure multi-user operation

 

Model 6700 covers the visible wavelength range with a spectral bandwidth of 4nm.

Model 6705 covers the UV/visible wavelength range with a spectral bandwidth of 4nm.

Model 6715 meets the EP/USP requirements with a spectral bandwidth of 1.5nm across the UV/visible wavelength range.

The large, colour touch-screen display ensures the fastest response to operator input and the clearest presentation of options and results. A sealed QWheelTM is provided for fine cursor control or scrolling. With this cutting-edge user interface and novel operating system the 67 series offer the simplest, most intuitive operation in their class.


Specification

 

Light Source

Tungsten Halogen (6700)
Xenon (6705/6715)

Optics

Sealed, MgF coated, split beam

Wavelength range

320-1100nm (6700) 190-1100nm (6705/6715)

Wavelength resolution

0.1nm

Wavelength accuracy

±1.0nm

Wavelength repeatability

±0.2nm

Spectral Bandwidth

4nm (6700/6705) 1.5nm (6715)

Stray Light

<0.1 at 340nm (6700) <0.05 at 220nm (6705/6715)

Photometric ranges

-0.300 to 3.000A & 0 to 199.9%T

Photometric resolution

0.001A & 0.1%T

Photometric accuracy

±0.005 at 1A

Photometric stability

<0.001A per hour

Quantitation range

-99999 to +99999

Number of Standards

20 with up to 5 replicates of each

Curve Fit Algorithms

Linear, Quadratic and Cubic functions

 

   

   

   

   

   

   

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jenway Model 6500 and 6505 1.8nm Bandwidth Spectrophotometers

High performance split beam optics
1.8nm bandwidth
Spectral addition and subtraction
1st-4th derivative and post scan analysis
Method and results storage
Application and data storage cards

 

The 6500 series are multi-capability scanning spectrophotometers designed to provide the user with a high quality system which offers all the features required by a scientist to manipulate and process spectral information.
The Model 6500 Visible range unit operates at 320-1100nm.
The Model 6505 UV/Visible range unit operates at 190-1100nm.

Features include:

A customised LCD gives a clear readout of calibration data, sample data and all set-up options.

Specification

Optics

Split beam

Wavelength range

320-1100nm (6500) / 190-1100nm (6505)

Resolution

0.1nm

Accuracy

±1.0nm

Bandwidth

1.8nm

Grating

1200 lines/mm

Transmittance range

0 to 199.9%T

Resolution

0.1%T

Accuracy

±1%T@10%T

Stray light

<0.05%T@340 & 220nm

Absorbance range

-0.300 to 3.000A

Resolution

0.001A

Accuracy

0.005A@1.0A

Concentration range

-300 to 9999Conc (resolution dependent)

Resolution

0.001 / 0.01 / 0.1 / 1

Units

ppb, ppm, µg/l, mg/l, M, %, blank

Factor

0.000 to 9999.99

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Jenway Model 6400 and 6405 5nm Bandwidth Spectrophotometers

 

Single beam scanning
5nm bandwidth
Multi-wavelength and kinetics analysis
Wide range of sampling accessories
Full interfacing capability
Optional 8 position multi-cell changer (quantitation measurement)

The 6400 series incorporate a wide range of features designed to satisfy the needs of users seeking to maximise the efficiency of routine and specialised UV and visible spectroscopy tasks.
The Model 6400 Visible range unit operates at 320-1100nm.
The Model 6405 UV/Visible range unit operates at 190-1100nm.

Features include:

A customised LCD gives a clear readout of calibration data, sample data and all set-up options.

Specification

Optics

Single beam

Wavelength range

320-1100nm(6400) / 190-1100nm (6405)

Resolution

0.1nm

Accuracy

±1.0nm

Bandwidth

5nm

Grating

1200 lines/mm

Transmittance range

0 to 199.9%T

Resolution

0.1%T

Accuracy

±1%T@10%T

Stray light

<0.05%T@340 & 220nm

Absorbance range

-0.300 to 3.000A

Resolution

0.001A

Accuracy

0.005A@1.0A

Concentration range

-300 to 9999Conc (resolution dependent)

Resolution

0.001 / 0.01 / 0.1 / 1

   

   

   

   

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jenway Model 6320D 8nm Bandwidth Spectrophotometer

 

Easy to use
Versatile sampling system
Full interfacing capability
G.L.P. compliant
320-1000nm/8nm SBW
Domed lid enables use with tall sample tubes

 

The Model 6320D is designed to provide the user with a high quality, low cost measurement system for routine analysis. The 6320D has modes for Absorbance, %T and Concentration measurement. Calibration is performed against a blank (Abs or %T) and a standard or factor for Concentration. Wavelength selection is made electronically via a finely geared stepper motor with a displayed resolution of 1nm.

Features include

A customised LCD gives simultaneous readout of wavelength and photometric result. Error messages, prompts, mode indication and a choice of concentration units are presented in an easily understood format.
 

Specification

Optics

Single beam

Wavelength range

320-1000nm

Resolution

1nm

Accuracy

±2nm

Bandwidth

8nm

Grating

1200 lines/mm

Transmittance range

0 to 199.9%

Resolution

0.1%

Accuracy

±1%T

Stray light

<0.5%T

Absorbance range

-0.300 to 1.999A

Resolution

0.001A

Concentration range

-300 to 1999Conc

Resolution

0.1/1

Units

ppm, mg/l, g/l, M, blank

Factor

0 to 199.9 / 1000 to 9999

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jenway Model 6315 8nm Bandwidth Spectrophotometer

 

Scanning UV/Visible spectrophotometer
Scans in the range of 1998 to 1000nm
Uses pulsed xenon lamp
200 method memory
Quantitation using up to 6 standards
 

The new Jenway Model 6315 completes the 63 Series product range. Building on the platform of the highly successful 6310, the model 6315 uses a pulsed xenon lamp to extend the wavelength range to the UV region. 
The 6315 is an advanced measuring system with modes for Photometrics, Spectrum Scanning, Kinetics, Concentration and Quantitation and will meet the demands of a wide range of applications in areas such clinical, veterinary, environmental and general QC testing.
 

Specification

Optics

Single beam

Wavelength range

198-1000nm

Resolution

1nm

Accuracy

±2nm

Bandwidth

8nm

Transmittance range

0 to 199.9%

Resolution

0.1%

Accuracy

±1%T

Absorbance range

-0.300 to 1.999A

Resolution

0.001A

Concentration range

-300 to 1999Conc

Selectable resolution

1/0.1/0.01/0.001

Calibration

Blank with a single standard or factor

Memory

50 methods

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jenway Model 6310 8nm Bandwidth Spectrophotometer

 

Photometric measurements in Absorbance and Transmittance
Concentration measurement by direct factor entry or against blank and standard
Quantitation using up to 6 standards - with curve correction and correlation coefficient
Kinetics with real time graphical display of sample and standard runs
Spectrum - scanning any range from 320-1000nm
Store up to 50 methods in each mode

 

An advanced measuring system with modes for Photometrics, Concentration, Quantitation, Kinetics and Scanning. The 6310 will meet the demands of a wide range of applications, especially those in the clinical, veterinary, environmental, general QC and performance testing areas.

Features include:

With a memory capacity of 50 methods for each mode, the fully open operating system ensures compatibility with reagent kits from most manufacturers, as well as enabling full customisation to the operator's choice of chemistries and operating procedures.

Specification

Optics

Single beam

Wavelength range

320-1000nm

Resolution

1nm

Accuracy

±2nm

Bandwidth

8nm

Transmittance range

0 to 199.9%

Resolution

0.1%

Accuracy

±1%T

Absorbance range

-0.300 to 1.999A

Resolution

0.001A

Concentration range

-300 to 1999Conc

Selectable resolution

1/0.1/0.01/0.001

Calibration

Blank with a single standard or factor

Memory

50 methods

       

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jenway Model 6305 6nm Bandwidth Spectrophotometer

 

Non-scanning
6nm bandwidth over UV range
Xenon lamp source with extended life
Self calibrating lamp at 3 wavelengths
Full interfacing capability

 

The Model 6305 is designed to provide the user with a high quality, low cost measurement system for routine analysis.

Features include:

A customised LCD gives simultaneous readout of wavelength and photometric result. Error messages, prompts, mode indication and a choice of concentration units are presented in an easily understood format.

Simple keypad layout and operating protocols ensure reliable operation by unfamiliar users.

Specification

Optics

Single beam

Wavelength range

198-1000nm

Resolution

1nm

Accuracy

±2nm

Bandwidth

6nm over UV range

Grating

1200 lines/mm

Transmittance range

0 to 199.9%

Resolution

0.1%

Accuracy

±1%T

Stray light

<0.5%T @ 340 and 220nm

Absorbance range

-0.300 to 1.999A

Resolution

0.001A

Concentration range

-300 to 1999Conc

Resolution

0.1/1

Units

ppm, mg/l, g/l, M, blank

Factor

0 to 199.9 / 1000 to 9999

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jenway Model 6300 8nm Bandwidth Spectrophotometer

 

Easy to use
Versatile sampling system
Full interfacing capability
G.L.P. compliant
320-1000nm/8nm SBW
Now includes free PC Software

 

The Model 6300 is designed to provide the user with a high quality, easy to use measurement system for routine analysis. The 6300 has modes for Absorbance, %T and Concentration measurement. Calibration is performed against a blank (Abs and %T) and a standard or factor for Concentration. Wavelength selection is made electronically via a finely geared stepper motor with a displayed resolution of 1nm.

Features include:

A custom designed LCD gives simultaneous readout of wavelength and photometric result. Error messages, prompts, mode indication and a choice of concentration units are presented in an easily understood format.

Specification

Optics

Single beam

Wavelength range

320-1000nm

Resolution

1nm

Accuracy

±2nm

Bandwidth

8nm

Grating

1200 lines/mm

Transmittance range

0 to 199.9%

Resolution

0.1%

Accuracy

±1%T

Stray light

<0.5%T

Absorbance range

-0.300 to 1.999A

Resolution

0.001A

Concentration range

-300 to 1999Conc

Resolution

0.1/1

Units

ppm, mg/l, g/l, M, blank

Factor

0 to 199.9 / 1000 to 9999

 

 

 

 

 

           

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Genova Life Science Analyser - DNA

 

Immediate answers to DNA purity

 

Pre-programmed for user selectable absorbance ratios

 

Direct readout of dsDNA, ssDNA, RNA and Oligo purity

 

Purity scan mode

 
 

The Genova is designed for the scientist whose primary interest is the study of DNA and proteins. Operation is simple and quick, with all routinely used DNA calculations being pre-programmed into the product. The Genova employs a precision built diffraction grating to select wavelengths and narrow bandwidth, thus avoiding the limited capability of filter based units. Three independent wavelength calibrations are performed during the start-up protocol to guarantee optimum confidence in results and to satisfy G.L.P. procedures.

Optimised for low volume analysis the determination of DNA levels as low as 70ng with sample volumes as low as 20µl is possible using the capillary sampling accessory. The Genova will automatically calculate ratios at 260/280 or 260/230 with an optional subtraction of a third wavelength (typically 320nm). Alternatively, pre-programmed factors allow direct readings of ssDNA, dsDNA, RNA and Oligonucleotides.

 

Standard pre-programmed parameters for B.C.A, Bradford, Biuret, Lowry and direct measurement

 

Storage of calibration curves

 

Versatile open architecture that allows other wavelengths and accessories for other assays to be performed

 

The on-board software allows all protein methodologies to be optimised and run on the Genova with a minimum of set-up time. These methodologies can then be viewed on the display for easy interpretation of linearity of response. The Genova has the versatility to change these parameters easily for the scientist who wants to optimise their analysis with different wavelength, curve or constant.

 

Jenway Fluorimeter Filters

 

There are 3 types of filter for the Jenway fluorimeters. 


The bandpass filters are ideal as excitation filters as they allow only the light between the specified wavelengths through to the sample. For example, UG1 allows all the light between 320 and 380nm through and excludes the light below 320nm and above 380nm. 

The cut-off and interference filters are normally used as the emission filters where a much narrower range of wavelengths is required. The cut-off filters block all light below the specified wavelength and the interference filters allow the specified wavelength and light ±5nm of this through to the sample.


Bandpass Filters

Part Code Description
627 126 UG1, 320 to 380nm bandpass filter
627 124 BG28, 380 to 500nm bandpass filter
627 125 VG9, 480 to 580nm bandpass filter

 

 

 


Cut-Off Filters

Part Code Description
627 131 Glass, 305nm cut–off filter
627 130 Kodak 2B, 395nm cut–off filter
627 129 Kodak 8, 475nm cut–off filter
627 128 Ilford 201, 545nm cut–off filter
627 127 Kodak 29, 610nm cut–off filter

 

 

 

 

 


Interference Filters

Part Code Wavelength Part Code Wavelength
627 141 250nm 627 167 460nm
627 132 254nm 627 136 470nm
627 142 260nm 627 168 480nm
627 143 265nm 627 169 490nm
627 144 270nm 627 170 500nm
627 145 280nm 627 171 510nm
627 146 290nm 627 137 515nm
627 147 295nm 627 172 520nm
627 148 300nm 627 173 530nm
627 149 305nm 627 174 532nm
627 150 310nm 627 175 540nm
627 151 313nm 627 176 546nm
627 152 320nm 627 177 550nm
627 153 326nm 627 178 560nm
627 154 330nm 627 179 570nm
627 155 334nm 627 180 577nm
627 156 337nm 627 181 580nm
627 133 340nm 627 182 590nm
627 140 350nm 627 183 600nm
627 157 360nm 627 184 610nm
627 138 365nm 627 185 620nm
627 158 370nm 627 186 630nm
627 134 380nm 627 187 633nm
627 159 390nm 627 188 640nm
627 135 400nm 627 189 650nm
627 160 405nm 627 190 656nm
627 161 410nm 627 191 660nm
627 162 415nm 627 192 670nm
627 163 420nm 627 193 680nm
627 164 430nm 627 194 690nm
627 165 436nm 627 195 694nm
627 166 440nm 627 196 700nm
627 139 450nm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fluorometers - Jenway

 

62 Series Fluorometers

• High quality optics: pulsed xenon lamp and Total Energy Transfer (TET)
• Intelligent Filter Modules ensure correct filters are fitted for selected method
• Intuitive programming allows fast program creation
• Raw fluorescence or concentration values options
• Standard curve and kinetic functions
• Heated sample holder and sipper pump accessories
• Compatible with DataWay PC software

Jenway offers three Fluorometer models to cover a wide range of applications. The 6280 model is ideal for the most sensitive determinations with emission wavelengths up to 650nm. When higher emission wavelengths are required the 6285 with its red-enhanced detector is the unit of choice. For less sensitive applications and a broader wavelength range up to 1100nm the low cost 6270 unit is more
suitable.

With press-to-read operation and Total Energy Transfer (TET) technology the output of the high-energy xenon lamp is maximised and its expected life extended so that it should never need replacing within the normal lifetime of the unit. The high quality optics are complemented by the Intelligent Filter Modules (IFM) that are identified by the unit, generating error messages should the wrong filters be fitted or their positions be incorrect.

Each model offers intuitive operation with a user interface based on logical menus that can be navigated from the simple keypad. Up to 20 methods can be created without restriction and saved for future use. They can also be locked against accidental change by password entry. The permanent time and date tag on every stored reading supports Good Laboratory Practice, while calibration reminders and operator identity can also be entered to support conformance and traceability of results.

All models are powered from an external, universal mains adapter suitable for use from 90V to 230V, while the 12V DC input enables use in vehicles or from suitable battery packs.

 

Technical Information

Model: 6270 6280 6285
Wavelength range 190 to 1100nm 190 to 650nm 190 to 850nm
Sensitivity1 1µg/ml <1ng/ml <1ng/ml
Dynamic range1 5.2x104 5.2x106 5.2x106
Detector Photodiode PMT2 PMT2
Wavelength selection Intelligent Filter Modules (IFM)
Light source Pulsed Xenon lamp with press-to-read operation
Expected life of lamp No replacement required in normal operation
Raw fluorescence readings Yes
Concentration standard curve Blank + up to 6 standards
Kinetics, timed option In both raw fluorescence and concentration modes
Kinetics options 1 reading every 3 to 999 seconds
No. methods stored 20
No. results stored 100 per method
GLP Method lock with password access. Time and date stamped results. Last calibration date and time stored. Calibration interval set. Calibration due reminder. User ID
Outputs RS232
PC software Compatible with DataWay (option)
Sample handling 10mm square cuvette holder (standard). Heated sample holder (option). Sipper pump (option)
Power supply 90 to 230V universal mains adapter 12V DC input
Size (w x d x h) 365 x 272 x 160mm
Weight 6kg
1 Using quinine sulphate
2 Photomultiplier tube

   

Flame Photometers - Jenway

 

PFP7 Industrial Flame Photometer


• Designed for industrial analysis
• Supplied with Na, K, Li, Ba and Ca filters
• Low temperature, single channel
• Flame failure safety system
• Operates with propane, butane, natural gas or LPG

The PFP7 is a low temperature, single channel flame photometer that is designed for the routine determination of sodium, potassium, calcium, barium and lithium concentrations. The flame failure safety system makes these products ideal for use in industrial and educational environments. The use of fine and coarse sensitivity controls allows for accurate measurements each and every time.


PFP7/C Clinical Flame Photometer

• Designed for clinical analysis
• Supplied with Na, K and Li filters
• Low temperature, single channel
• Flame failure safety system
• Operates with propane, butane, natural gas or LPG

The PFP7/C is a low temperature, single channel flame photometer that is specifically designed for use in clinical applications for the determination of sodium, potassium and lithium. The in-built lineariser circuitry of the PFP7/C enables readings of both sodium and potassium to be displayed directly in mmol/l. The series 7 diluter is available for use with the PFP7/C to enable serum samples to be diluted efficiently and accurately to the required ratios.

Technical Information

Model: PFP7 PFP7/C
Range: 0 to 199.9ppm 120 to 160mmol/l Na
0 to 10.0mmol/l K
Limits of detection: Na 0.2ppm
K 0.2ppm
Li 0.25ppm
Ca 15ppm
Ba 30ppm
Na 0.2ppm
K 0.2ppm
Li 0.25ppm
Reproducibility: <1% coefficient of variation for 20
consecutive samples using 10ppm Na set to read 50
<1% coefficient of variation for 20 consecutive samples using 10ppm Na set to read 50
Linearity: < 2% error when 3ppm Na/K and 5ppm Li are set to read 100 < 2% error when 3ppm Na/K and 5ppm Li are set to read 100
Stability: < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0 < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0
Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5% Interference from Na/K and Li equal in concentration to test element will be <0.5%
Recorder output: Nominal 1.00V for a reading of 100.0 Nominal 1.00V for a reading of 100.0
Services:
Electrical: 90-125V or 190-250V @50/60Hz 90-125V or 190-250V @50/60Hz
Air: Moisture and oil free, 6 litre/min @ 14psi Moisture and oil free, 6 litre/min @ 14psi
Fuel: Propane, butane, natural gas or LPG Propane, butane, natural gas or LPG
Size (w x d x h): 420 x 360 x 300mm 420 x 360 x 300mm
Weight: 8kg 8kg
 

Spectrophotometers - Jenway

?Jenway are proud to announce the launch of a new double beam spectrophotometer – Model 6850. This is the first spectrophotometer in the Jenway range with a variable spectral bandwidth, providing a very flexible platform for a wide variety of quality control, pharmaceutical, biochemical and clinical applications. The 6850 provides research level performance at a low price point.

This versatile spectrophotometer has an integrated user interface for fast and intuitive local control. The 6850 offers multiple measurement modes for photometrics, concentration, multi-wavelength, spectrum scanning, quantitation, kinetics and DNA and protein analysis.

Model 6850 covers the UV/visible wavelength range from 190 to 1100nm with a user selectable spectral bandwidth of 0.5nm, 1nm, 2nm, 4nm or 5nm providing flexibility whilst ensuring compliance to European Pharmacopeia requirements.

An integrated user interface provides full control of the instrument so there is no need to buy a PC to run the spectrophotometer. However, Jenway Prism PC control software is included as standard, introducing functionality such as greater data storage and additional post-measurement tools..

Technical Information

Model 6850
Wavelength range 190 to 1100nm
Wavelength resolution 0.1nm
Wavelength accuracy ± 0.3nm (at 0.5 and 1nm bandwidth) ± 0.5nm (at 2, 4 and 5nm bandwidth)
Wavelength reproducibility ±0.2nm
Spectral bandwidth Variable 0.5, 1, 2, 4, 5nm
Photometric range –0.3 to 3.0A 0 to 200%T
Photometric accuracy ± 0.002A (0-0.5A)              ±0.3%T (0-100%T)
Photometric reproducibility ±0.001 Abs (0 to 0.5 Abs)               ±0.002 Abs (0.5 to 1.0 Abs)0.15%T (0-100%T)
Resolution 0.1%T, 0.001A
Stray light <0.05%T at 220 and 360nm
Noise 0.0005A
Stability ± 0.001A/h at 500nm after 15 min warm up
Multi–wavelength Up to 10 wavelengths, up to 20 wavelengths with PC software
Calculations Ratio, difference, formulae with factors
Spectrum range Any range between 190 and 1100nm
Scan speed 100 to 2000nm/min
Scan interval 0.1, 0.2, 0.5, 1, 2 or 5nm
Analysis Auto peaks and valleys, zoom, Addition, subtraction, peak ratios, smoothing, area under curve,
wavelength table, derivatives, overlay with PC software
Kinetics  Up to 12 hours with time intervals of 0.1, 0.2, 0.5, 1, 2, 5, 10 or 30 seconds
Analysis Slope and formula of line of best fit between any two points
Quantitation points Up to 3 wavelengths
Quantitation Calibration Blank with up to 10 standards or factor
Concentration range 0–99999
Calibration Blank with standards or factor
DNA DNA Ratio, concentration, A320 correction.
Light source Tungsten halogen and Deuterium lamps
Lamp changeover 325 to 370nm selectable
Outputs USB and parallel
Operating system: Windows 2000, XP, Vista, Windows 7
Electrical supply 120VA, 220/110V, 50/60Hz
Size (w x d x h) 600 x 450 x 200mm
Weight 22kg

Spectrophotometers - Jenway

 

?6800 Double-Beam Spectrophotometer

• Double beam spectrophotometer with highly stable optics
• 1.5nm spectral bandwidth
• Jenway Flight Deck software included as standard
• Now available with IQ/OQ documentation

With the 6800 Jenway introduces the first double beam spectrophotometer to the range. The highly stable optics and 1.5nm spectral bandwidth ensures high resolution and accuracy on every measurement. The Jenway Flight Deck software offers modes for all common measurement methods: photometrics and multi-wavelength, spectrum scanning, time scan and kinetics, quantitation, DNA/RNA and protein measurements. With extensive post-measurement tools and easy export to Excel® the 6800 double beam spectrophotometer ensures that all results are presented exactly to your requirements.

The 6800 is now available to order with IQ/OQ documentation. IQ/OQ is the process of verifying and validating that the instrument is installed correctly and conforms to its specification. This documentation is an important component of the quality management system.

Technical Information

Model 6800
Wavelength range 190 to 1100nm
Wavelength resolution 0.1nm
Wavelength accuracy ±0.3nm
Wavelength repeatability ±0.1nm
Spectral bandwidth 1.5nm
Transmittance 0 to 600%T
Absorbance –3.0000 to 3.0000A
Accuracy ±0.3%T, ±0.002A at 0 to 0.5A, ±0.004A at 0.5 to 1.0A, ±0.008A at 1.0 to 2.0A
Reproducibility ±0.15%T, ±0.001A at 0 to 0.5A, ±0.002A at 0.5 to 1.0A, ±0.004A at 1.0 to 2.0A
Resolution 0.01%T, 0.0001A
Stray light <0.05%T at 220 and 340nm
Noise 0.0003A
Stability ±0.0003A/h after 2h
Multi–wavelength Up to 6 wavelengths
Calculations Ratio, difference, formulae with factors
Spectrum range Any range between 190 and 1100nm
Scan speed 10 to 3600nm/min (8 speed settings)
Scan interval 0.5, 1, 2 or 5nm, dependent on scan speed
Analysis Auto peaks and valleys, zoom, addition, subtraction, peak ratios, smoothing, area under curve, wavelength table, derivatives, overlay
Time scan and Kinetics Between 30 to 99999 seconds
Analysis Slope and formula of line of best fit between any two points
Quantitation points Up to 3 wavelengths
Concentration range 0–99999
Calibration Blank with standards or factor
DNA/RNA and Protein DNA/RNA Ratio, concentration, A320correction. Protein; Bradford, Lowry, BCA, direct UV
Light source Tungsten halogen and Deuterium lamps
Lamp changeover 325 to 370nm selec table
Outputs RS232
Operating system: CPU: 1GHz Memory: 256Mb Hard disk: 500Mb
Power 200VA
Size (w x d x h) 540 x 560 x 235mm
Weight 27kg
 

Spectrophotometers - Jenway

 

?Genova Life Science Spectrophotometer

• Pre-programmed for DNA/RNA analysis
• DNA purity scan mode
• Pre-loaded protein concentration determination methods
• Standard spectrophotometer functions

The Genova allows the measurement of DNA concentrations and purity ratios using the wavelengths recorded at 260 and 280nm or 260 and 230nm with optional correction at a third wavelength. The purity scan gives a clear, graphic display of DNA purity. This allows any shifted or distorted peaks due to interfering molecules to be identified. The Genova also contains five pre-programmed methods for the Bradford, Lowry, Biuret, Bicinchonininc acid (BCA) and Direct UV techniques. In all cases the standard procedures may be modified by the user or run as programmed.

Technical Information

Model Genova
Wavelength range 198 to 1000nm
Wavelength resolution 1nm
Wavelength accuracy ±2nm
Wavelength repeatability ±0.5nm
Spectral bandwidth 8nm, 5nm typical at 270nm
Transmittance 0 to 199.9%T
Absorbance –0.300 to 1.999A
Photometrics accuracy ±1%T at 10%T
Resolution 0.1%T, 0.001A
Stray light <0.5%T at 220 and 340nm
Noise <0.001A at 0A at 400nm
Stability <0.002A/h after 30 minutes
Concentration range –300 to 9999
Concentration resolution Selectable 1, 0.1, 0.01 or 0.001
Units ppm, mg/l, g/l, M, %, µg/l, µg/ml, mg/ml, ng/ml, blank (mode specific)
Factor 0 to 199.9, 1000 to 9999
Spectrum range Survey scan 50nm either side of set wavelength (250–950nm)
Scan interval 1nm
Analysis Absorbance and wavelength of peak
GLP Real time clock and calendar, Operator ID. Supervisor security (locks all set up parameters). Method display lock
Light source Xenon lamp
Outputs Analogue and RS232
Power <50W
Size (w x d x h) 365 x 272 x 160mm
Weight 6kg
 

Chloride meter Jenway PCLM3 supplied with buffer, gelatin, chloride standard, 3 silver electrodes, 2 silver anodes, electrode polish, glass beaker, stirrer and tweezers (230V/50Hz)

 

• For clinical or industrial applications

• Uses proven coulometric titration principle
• Three sample volumes: 20 and 100µl for clinical and 500µl for industrial
• Simple to operate
• Fast reliable results
• Automatic indication when reagent replacement or electrode cleaning is required

The PCLM3 chloride meter can be used to determine chloride concentrations in numerous types of samples. Biological samples such as serum, plasma, urine, sweat and cerebrospinal fluid are commonly tested. Other samples can be tested provided they are of low ionic strength, neutral pH, have low levels of dissolved solids, low solid matter and are free from silver halides and other components which may react with silver.



Technical Specification

Clinical Meter

Parameter Clinical Meter
Range 10 to 299mmol/l
Sample volume 20µl or 100µl
Reproducibility ±1% for 100µl sample at 100mmol/l, ±1.5% for 20µl sample at 100mmol/l
Linearity <±1mmol/l or ±1% of concentration value (whichever is the greater)
Power 230, 50Hz
Size (w x d x h) 240 x 215 x 160mm
Weight 3.1kg


 

 

 

 

 


Industrial Meter

Parameter Industrial Meter
Range 10 to 999mg/l
Sample volume 500µl
Reproducibility ±3mg/l
Linearity ±3mg/l or 1% (whichever is the greater)
Power 230, 50Hz
Size (w x d x h) 240 x 215 x 160mm
Weight 3.1kg

 


Ordering Information
 

Part Code Description
504 043 PCLM3 clinical chloride meter supplied with buffer, gelatin, clinical chloride standard, 3 silver electrodes, 2 silver anodes, electrode polish, glass beaker, stirrer and tweezers (230V/50Hz)
504 044 PCLM3 industrial chloride meter supplied with buffer, gelatin, industrial chloride standard, 3 silver electrodes, 2 silver anodes, electrode polish, glass beaker, stirrer and tweezers (230V/50Hz)

 

 


 


Consumables

 

Part Code Description
504 053 Pack of 3 silver anodes
504 052 Pack of 3 silver electrodes (1 cathode, 2 detectors)
060 028 Electrode polish
025 011 Acid buffer solution (500ml)
025 013 Chloride standard, clinical, 100mmol/l (180ml)
025 014 Chloride standard, industrial, 200mg/l (180ml)
060 029 Stirrer bars (pack of 10)
024 018 Glass beaker
025 012 Gelatin (30ml)

025 195

 

 

Colorimeters - Jenway

6051 Bench Colorimeter


• Wide wavelength range from 400 to 710nm
• Ideal for routine and educational use
• Easy to use and conventional style controls
• Sample flexibility with many size options
• Mains or battery operated

The 6051 is a general purpose colorimeter, equipped with easy-to-use conventional style controls, making it ideal for routine and educational use.

Standard 10mm square cuvettes, semi-micro volume cuvettes, flowthrough or pour in/suck out cells can all be used with the standard sample holder. Excellent sampling flexibility is achieved through the optional cell holder assemblies, allowing the use of 10, 20, and 40mm cells, whilst multiple sampling handling is possible with the four cell carriage. For temperature-dependent measurements a heated cell block is available.

Technical Information

Model: 6051
Wavelength range: 400 to 710nm
Wavelength selection : 8 in-built gelatin filters: 430, 470, 490, 520, 540, 580, 600 and 710nm
Measurement ranges: 0-100%T
0-1.50Abs
0.1 to 1000 Conc
Resolution: 1%T, 0.01Abs, 0.1 to 1 Conc
Bandwidth: Typically 40nm
Blank drift: 2%/hr after 15 minute warm-up
Photometric linearity: 1%T
Light source: Tungsten filament lamp
Output: Analogue, 10mV per digit
Power: 230V, 50Hz
Size (l x w x d): 300 x 355 x 120mm
Weight: 3kg
 

Combined acid buffer (500ml)