Incubators - CO2 And Multigas News

Introduction
BINDER CO₂ Incubators CB, CBF & CB-S series from WolfLabs
BINDER’s range of CO₂ incubators — including the CB, CBF and CB-S series — offers reliable, contamination-resistant environmental control for modern laboratories. Designed for cell culture, tissue engineering and microbiology research, these incubators deliver precise control of temperature, CO₂ concentration and humidity, helping scientists maintain optimal growth conditions with confidence. Built with robust stainless-steel interiors and advanced sterilisation systems, BINDER CO₂ incubators support reproducible results across routine and demanding applications.

Features & Benefits
- Advanced contamination control - All models use a 180 °C hot-air sterilisation cycle to disinfect the chamber and components, reducing the risk of microbial contamination and supporting aseptic cell culture workflows.
- Precise CO₂ and temperature regulation - With infrared CO₂ sensors and stable temperature control from slightly above ambient up to ~50 °C, these incubators maintain consistent culture conditions that safeguard cell health and experimental integrity.
- Humidity stability for optimal growth - The CB and CB-S models provide condensation-free humidity control to reduce evaporation and maintain high relative humidity, while CBF models feature enhanced humidity regulation for more demanding culture environments.
- Intuitive control and data logging - Touchscreen or LCD controllers enable simple operation, while built-in data loggers and USB export make it easy to monitor and record temperature, CO₂ and humidity data for compliance and analysis.
- Robust, easy-to-clean construction - Seamless stainless-steel inner chambers, fanless interior designs and removable shelves create hygienic environments and simplify routine cleaning — ideal for busy laboratories.

🔬 Why Choose a Binder Incubator?
Binder incubators are trusted globally for their precision, safety, and performance. Benefits include:
- Excellent temperature and CO₂ uniformity
- High standards of contamination control
- Energy-efficient operation
- Long-lasting reliability
- Simple, user-friendly controls

🔍 Key Considerations When Selecting a Binder Incubator
1. Type of Incubator
- CO₂ Incubators – Best for general cell culture work requiring a stable CO₂ environment.
- Multigas Incubators – Suitable for advanced applications needing control of CO₂ and O₂ levels (e.g., hypoxia research). Explore the full range here: https://www.wolflabs.co.uk/laboratory-equipment/incubator-co2-and-multigas

2. Chamber Volume
Binder offers a variety of chamber sizes:
- Small (50–100L) – For compact labs or limited-volume cultures
- Medium (150–200L) – Ideal for most applications
- Large (250L and above) – Perfect for high-volume labs or multi-user environments

3. Contamination Control
- 180°C hot air sterilisation – For thorough and efficient decontamination
- Seamless inner chamber design – Minimises contamination and simplifies cleaning

4. Humidity Regulation
- Uses passive humidity control via water trays
- Some models include active humidity control options for precise conditions

5. Oxygen (O₂) Regulation – Multigas Models Only
O₂ regulation down to 0.1% is ideal for:
- Hypoxic research
- Tumour biology
- IVF and stem cell studies

6. Data Logging & Connectivity
- USB and Ethernet ports
- Optional software for remote monitoring and data logging
- Supports GLP/GMP compliance

🛠 Featured Binder Models Available from Wolflabs

View Binder Incubators: https://www.wolflabs.co.uk/laboratory-equipment/incubator-co2-and-multigas

📦 Why Purchase from WolfLabs?
- Competitive pricing
- Free delivery across UK mainland
- Expert technical support
- ISO 9001 and ISO 14001 certified supplier

🤔 Need Expert Help?
If you're unsure which model suits your needs, our team is ready to assist. ➡ Contact WolfLabs

💡 Quick Buying Tips
- Check chamber size vs shelf configuration
- Choose a model with sterilisation if contamination is a concern
- Plan for future needs – Binder incubators are built to last

Introduction
Haier Biomedical HCP-80/168/258 CO2 incubators from Wolflabs.
The Haier Biomedical CO2 incubator uses professional and superior technology to provide reliable conditions for frontline medical staff to carry out epidemiological and translational research, and to create a stable cell and virus culture environment for researchers.

Features and benefits
- Uniform and stable temperature
- Precise CO2 concentration
- 180°C dry-heat sterilization
- Door heating function, eliminates microbial contamination
- IoT APP available for real time monitoring (optional)

Introduction
Thermo Scientific Forma Steri-Cycle i250 CO2 incubator series from Wolflabs.

Features and benefits
- A bright LED display provides at-a-glance monitoring even from a distance
- 255 L chamber accommodates high throughput and large culture vessels
- Choice of electropolished stainless steel or 100% pure copper
- Easy-to-clean, coved-corner interior with convenient access port
- Reversible exterior door for added flexibility and readily stackable in a compact footprint

Mini CultureSafe 50S - High-Temp. Disinfection = 200°C

CultureSafe P190

CultureSafe P19D - High-Temp. Disinfection = 160°C

Discounted Incubators - CO2 And Multigas. OFFER ENDS 2012-09-30

Incubators - CO2 And Multigas - LEEC products GA2000, GA2010, GA3000 and GA3010 have been added.

The specially developed microprocessor controller gives the user day to day control over all alarm settings, alarm delay and calibration adjustment. These settings are protected by an anti-tampering procedure. Sensors placed within key areas of the chamber constantly monitor and enable the control system to optimise temperature and CO2 levels. After door opening, the culture conditions quickly recover without overshoot, and stable control is maintained. Profiled heating, a technique developed by LEEC, eliminates all risk of "hot-spots".

Wolflabs Binder :: Incubators - CO2 And Multigas - Special Offer OFFER ENDS 2012-12-24

Offers for CO2 And Multigas Incubators from Eppendorf / New Brunswick Scientific. The special offer models are; Galaxy 170R, Galaxy 170R/O2 Control, and Galaxy 170S

Offers for CO2 And Multigas Incubators from Binder. The special offer models are; C150 both right and left hinged doors

Discounted C150 and CB150 CO2 Incubators. OFFER ENDS 2013-12-24

Hi Linda,

Thanks for that – pleasure doing business with you – as always!

Regards,

Kathryn

Hi Linda, Thanks for the quotation and the engineer was here and the incubator is working now. 

many thanks for your help.

Kind regards

Customer

Thank you very very much for your help Linda. The incubator works now fine.
Best wishes
Customer

Dear Linda,

Thanks a lot for your usual fast and informative reply.

The reply from the engineer makes indeed sense

In the meantime, thank you again for your efficient attention.

Best wishes,

Customer

Dear Linda,

Thank you very much, I wish to thank you and the engineer for your help,

Best wishes,

Customer

Eppendorf / New Brunswick Scientific have just launched an updated version of the very popular Galaxy 170S CO2 incubator.

The new units now come with -

- BMS relays fitted as standard on every unit
- Recessed CO2 auto-zero filter port (to avoid accidental loss of filter during shipment)
- Brand new perforated shelves with improved flatness tolerance of 1mm

Confirmation of the new part numbers are shown below -

CO170S-230-0000 (Galaxy 170S) replaced by CO17101002
CO170S-230-1000 (Galaxy 170S with high temperature decontamination) replaced by CO17111002

Composite part numbers are now available with the 4 split inner doors included as standard -

CO17104002 (Galaxy 170S with 4 split inner doors)
CO17114002 (Galaxy 170S with high temperature decontamination and 4 split inner doors)

Our top selling CO2 incubators

9040-0038-Offer - Wolf special offer - Incubator CO2 cell/tissue culture Binder CB150 capacity 150l, with infra red CO2 sensor, heat disinfection to 180oC, no oxygen control, datalogger included, stainless steel chamber, optional 30mm access port OFFER ENDS 24-12-2014

9040-0078-Offer - Wolf special offer – Incubator CO2 cell/tissue culture Binder C150 capacity 150l, with infra red CO2 sensor, heat disinfection to 180oC, no oxygen control, no datalogger, stainless steel chamber, optional 30mm access port. Free installation & commissioning three years parts and labour warranty OFFER ENDS 24-12-2014

We are currently shipping this highly specified Binder CO2 incubator from stock for only £3,134

9040-0078-Offer - Wolf special offer – Incubator CO2 cell/tissue culture Binder C150 capacity 150l, with infra red CO2 sensor, heat disinfection to 180oC, no oxygen control, no datalogger, stainless steel chamber, no 30mm access port. Free installation & commissioning three years parts and labour warranty OFFER ENDS 24-12-2014

Discounts of over 30% on the Binder and Eppendorf CO2 incubators here - http://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Dear Linda,

The unit is working properly again, so thank you very much for all your help so far.

Best regards

Our range of Eppendorf CO2 incubators have just been updated. Many different configurations can now be ordered with just 1 part number.

Dear Linda

Many thanks for your help.  Your communication with us has been exceptional as well as promptness.  Please pass this on to your boss or whoever.

With best wishes

Susan

New Galaxy 170R copper chamber CO2 and multigas incubators from Eppendorf/New Brunswick Scientific have been added.

Discounts of over 35% - http://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

New C170 CO2 and multigas incubator from Binder has been added.

New MCO-230AIC-PE and MCO-230AICUV-PE CO2 and multigas incubators from Sanyo / Panasonic have been added.

New CB series CO2 and multigas incubators with 0.2 to 95% O2 control and 4 inner glass doors from Binder have been added. The Binder CB is particularly suitable for incubating sensitive cells while also guaranteeing the best possible conditions for cell cultures during both the production process and cell-based screenings. This Binder incubator is even suitable for complex cultivation experiments with individual environments and hypoxic conditions thanks to its comprehensive assortment of options and accessories.

Introduction
The new C170 CO2 incubator has been designed for standard applications in the cell culture laboratory. It provides a reproducible control for the cell well-being parameters while also ensuring the best possible levels of contamination safety in the incubator thanks to its straightforward design. When stacked, it offers 340 liters of incubation space and excellent usability.

Features and benefits
- Auto-sterilization with hot air at 180 °C
- Humidification system with condensation protection
- CO2 gas-mixing jet with Venturi effect
- CO2 sensor with infrared technology
- Tightly sealed inner door made of tempered safety glass
- Seamless, deep-drawn inner stainless steel chamber
- Perforated shelves, stainless steel
- Units are stackable with stacking adapter
- Troubleshooting system with visual and acoustic alarms
- Zero-voltage alarm contact

Introduction
LEEC Mini CultureSafe P series CO2 and multigas incubators from Wolflabs. The LEEC Culture Safe CO2 precision incubator has a fully sealed, electro-polished, one-piece, deep drawn chamber, manufactured from the high grade 304 stainless steel. The outer cabinet is manufactured from stainless steel, and has an anti-bacterial powder coat paint finish. This gives the CO2 incubator exceptional corrosion and contamination resistance. An inner glass viewing door closes positively onto an inert (no VOC's) gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A side access port allows temperature monitoring probes to be inserted safely into the CO2 incubator chamber.

Features and benefits
- A new 6 sided direct heating system with high performance insulation ensure the highest standards in temperature control and stability. The independent outer door heater ensures that the inner glass door remains condensate free.  
- User friendly and simple to program control system, with a clear, concise, LED display and programme menus.
- Anti tilt easily removable shelves. Built in handle lip, shelf dividers supplied with 8 inner door option.
- Easy to clean robust heavy duty outer door seal.
- Inner chamber & racking
- Significantly reduced risk of contamination
- Zero vibration: eradicates any possibility of cell edging effect
- Significantly less evaporation; minimise loss of water in the water tray, hence less risk of sample evaporation and possible desiccation
- Considerably easier to clean
- Very easy and quick to remove shelves and shelf racks for ease of cleaning
- Considerably more useable space, no ducting or built in hepa to minimise useable space
- No fan maintenance
- No extra costs to replace expensive fan Hepa filters and the associated health risks in doing so
- Helps to minimise loss of chamber conditions during inner glass door opening
- No turbulent airflow that can spread contamination introduced into the inner chamber quickly.

Prices starting at £2647 - http://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Introduction
New CB60, CB160 and CB220 series CO2 incubators with O2 control and 4 inner glass doors from Binder have been added.

Features and benefits
CB60
- Temperature range: room temperature plus 7 °C to 60 °C
- Humidity range: up to 95% RH
- Auto-sterilization with hot air at 180 °C
- Double-pan humidification system with condensation protection
- CO2 gas-mixing jet with Venturi effect
- Hot-air sterilizable CO2 sensor with infrared technology
- Display via color LCD monitor
- Lockable door handle
- Tightly-sealed inner door made of tempered safety glass
- Seamless, deep-drawn inner stainless steel chamber
- 2 perforated stainless steel shelves
- Units are stackable with stacking adapter
- Troubleshooting system with visual and audible alarms
- Computer interface: Ethernet
- Internal data recording and USB

CB160
- Temperature range: room temperature plus 7 °C to 60 °C
- Humidity range: up to 95% RH
- Auto-sterilization with hot air at 180 °C
- Double-pan humidification system with condensation protection
- CO2 gas-mixing jet with Venturi effect
- Hot-air sterilizable CO2 sensor with infrared technology
- Display via color LCD monitor
- Lockable door handle
- Tightly-sealed inner door made of tempered safety glass
- Seamless, deep-drawn inner stainless steel chamber
- 3 perforated stainless steel shelves
- Units are stackable with stacking adapter
- Troubleshooting system with visual and audible alarms
- Computer interface: Ethernet
- Internal data recording and USB interface
- Zero-voltage alarm contact

CB220
- Temperature range: room temperature plus 7 °C to 60 °C
- Humidity range: up to 95% RH
- Auto-sterilization with hot air at 180 °C
- Double-pan humidification system with condensation protection
- CO2 gas-mixing jet with Venturi effect
- Hot-air sterilizable CO2 sensor with infrared technology
- Display via color LCD monitor
- Lockable door handle
- Tightly-sealed inner door made of tempered safety glass
- Seamless, deep-drawn inner stainless steel chamber
- 3 perforated stainless steel shelves
- Units are stackable with stacking adapter
- Troubleshooting system with visual and audible alarms
- Computer interface: Ethernet
- Internal data recording and USB interface
- Zero-voltage alarm contact

Introduction
LEEC CultureSafe Precision CO2 and multigas incubators from Wolflabs. The LEEC Culture Safe Precision CO2 incubators have a fully sealed, electro-polished, one-piece, deep drawn chamber, manufactured from the high grade 304 stainless steel. The outer cabinet is manufactured from stainless steel, and has an anti-bacterial powder coat paint finish. This gives the CO2 incubator exceptional corrosion and contamination resistance. An inner glass viewing door closes positively onto an inert (no VOC's) gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the CO2 incubator chamber.

Features and benefits
- 160°C Decontamination (P190D)
- Simple Control System
- Easily-Removable Racking and Shelves
- No internal fan
- Drift-free CO2 sensor
- 190 Litre Capacity
- Market-leading anti-microbial biocide paint
- Market leading energy efficiency

Hi Debbie,
Can I also just take the time to thank the guys who came out with the incubator. They were very helpful and friendly. They took the time to check the lift for us which was over and above what they needed to do. We were very pleased with the customer service! We are planning to relocate later on in the year and are looking for a company to buy new equipment from and help with the move and from the service we have got, we will be using wolf labs. It’s not often nowadays that customer service is a priority so I just wanted you to know how pleased we were with them and all the service we have been provided by yourselves.
Regards,
Laura

Introduction
LEEC GA2000, GA2010, GA3000 and GA3010 CO2 and multigas inclubators from Wolflabs. These CO2 incubators set advanced standards in performance and freedom from contamination. The two research models have the added benefit of a high temperature decontamination facility.

Features and benefits
- Microprocessor control with soft touch panel.
- Bright LED digital displays for temperature and CO2.
- Comprehensive alarm system (audible and visual) monitors all critical functions.
- Stainless steel outer cabinet for longer life.
- Ultra smooth stainless steel chamber helps contamination control.
- Adjustable levelling feet.
- Two cable access ports.
- Built-in cooling coil can be connected to a source of chilled water for operation close to or below ambient temperature.
- High and low alarm warnings (temperature and CO2).
- Independent overtemperature safety cutout with failsafe.
- Remote alarm connections (volt-free, N/0, N/C).
- Unidirectional airflow.
- HEPA filter removes airborne contaminants.
- High temperature decontamination (Research models).
- Indirectly heated inner glass door prevents condensation.

Introduction
Eppendorf / New Brunswick Scientific Galaxy 170S CO2 and multigas incubators from Wolflabs. Galaxy 170S CO2 incubators are high-capacity, 170 litre incubators that provide superior quality, outstanding performance, and intuitive operation. These models can be conveniently placed on or under the bench or even double-stacked. Galaxy 170S models provide a tremendous amount of usable space that can be optimized with options such as high temperature disinfection and split inner doors.

Features and benefits
- Sealed inner glass door, reliable IR CO2 sensor, RS-232 communication port, 25 mm access ports
- High Temperature Disinfection (4 hour at 120 °C) optional
- Available with split inner doors
- Fanless design offers more usable space and eliminates the fan as a classic, and often repeated source of contamination
- Six-sided direct heating system provides a uniform incubated environment
- Deep-drawn, easy-to-clean stainless steel chamber eliminates seams or welds, removing potential sources of contamination
- Low gas consumption

Discounts of over 35% - http://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Introduction
Sanyo / Panasonic MCO-5AC-PE CO2 and multigas incubator from Wolflabs. Personal CO2 Incubator, triple stackable. This CO2 Incubator meets GLP requirements by helping to avoid patient-to-patient cross contamination in individualized patient-specific clinical incubation applications.

Features and benefits
- Preventive Contamination Control
- Ergonomic Design
- Field-reversible Door
- Active Background Contamination Control
- Heat Decontamination Not Required
- High Performance In Vitro Modeling
- Automatic CO2 Cylinder Switchover System
- Ergonomic Design (Compact, Triple Stacking)
- TC Sensor System
- Compact, triple stacking
- Single chamber
- Active Background Contamination Control
- Patented Direct Heat and AIR Jacket Heating System
- Panasonic inCu saFe copper-alloy-stainless interior, shelves and plenum
- Panasonic SafeCell UV continuous active background ultraviolet light sterilization
- Water Level Sensor
- Automatic Gas Cylinder Switchover System (Optional)
- In Vitro Fertilization Applications

Introduction
New GA2000-C3 and GA3000-C3 CO2 and multigas incubators from LEEC have been added. These CO2 incubators set advanced standards in performance and freedom from contamination. The two research models have the added benefit of a high temperature decontamination facility. 

Features and benefits
- Microprocessor control with soft touch panel.
- Bright LED digital displays for temperature and CO2.
- Comprehensive alarm system (audible and visual) monitors all critical functions.
- Stainless steel outer cabinet for longer life.
- Ultra smooth stainless steel chamber helps contamination control.
- Adjustable levelling feet.
- Two cable access ports.
- Built-in cooling coil can be connected to a source of chilled water for operation close to or below ambient temperature.
- High and low alarm warnings (temperature and CO2).
- Independent overtemperature safety cutout with failsafe.
- Remote alarm connections (volt-free, N/0, N/C).
- Unidirectional airflow.
- HEPA filter removes airborne contaminants.
- High temperature decontamination (Research models). 
- Indirectly heated inner glass door prevents condensation.

Introduction
Sanyo / Panasonic MCO-18AC-PE CO2 and multigas incubator from Wolflabs. The IncuSafe MCO-18AC CO2 Incubator was developed utilizing advanced technology for unprecedented temperature and CO2 control. Chamber conditions are accurately maintained by the Microprocessor P.I.D controller. The DHA Direct Heat & Air Jacket was designed to surpass the performance of the traditional water jacket and eliminates the inconveniences of using water. Start-up simple and easy with the automatic set-up function.

Features and benefits
- Preventive Contamination Control
- Ergonomic Design
- Improved Temperature Stability with D.H.A. System
- Heat Decontamination Not Required
- High Performance In Vitro Modeling
- Automatic CO2 Cylinder Switchover System (optional)
- Ergonomic Design
- TC Sensor System
- Double stacking
- Single chamber
- Active Background Contamination Control
- Patented Direct Heat and AIR Jacket Heating System
- Panasonic inCu saFe copper-alloy-stainless interior, shelves and plenum
- Field-reversible Door
- Water Level Sensor (Optional)
- Automatic Gas Cylinder Switchover System (Optional)

Introduction
Eppendorf / New Brunswick Scientific Galaxy 48R CO2 and multigas incubator from Wolflabs. The Galaxy 48R CO2 Incubator is a mid-sized, 48 litre incubator designed to optimize performance in applications that require a higher level of isolation and can be used in small labs. The 48R series of incubators feature a large backlit display with on screen help menu, control and data logging of temperature, CO2, door openings, alarms, and optional O2 gas and humidity monitoring.

Features and benefits
- 48 Litre (1.7 ft3) provides mid-sized capacity within a small footprint
- Options: High Temp. Disinfection (4 hour at 120 °C), O2 control (e.g. for hypoxic studies), 2-split inner glass door
- Fanless design offers more usable space
- Six-sided direct heating system provides a uniform incubated environment
- Deep-drawn, easy-to-clean stainless steel chamber without seams or welds
- Low gas consumption
- Integrated alarm relay

Prices starting at £2,673 - https://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Incubator CO2 cell/tissue culture Leec Mini CultureSafe P50 capacity 50l, no oxygen control, no disinfection, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor

Incubator CO2 cell/tissue culture Leec CultureSafe P190 capacity 190l, no oxygen control, no disinfection, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor 

Incubator CO2 cell/tissue culture Leec CultureSafe P190D capacity 190l, no oxygen control, heat disinfection to 160°C, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor 

Introduction
New 14LGOLD/O2, 14LGOLD and 14LSTANDARD CO2 and multigas incubators from GS Biotech have been added. Scottish based GS Biotech, design and manufacture a range of CO2 Cell Culture Incubators. The range is initially comprised of:- 14, 48, and 170 litre chamber capacities. All models are close descendants of the first six-sided, direct heat incubator. GS Biotech has built on this lineage with smart blending of older and newer technologies to build reliability, performance and choice into the range - at a fair price.

Features and benefits
- Optimum chamber environment, profiled heating creates gentle circulation –no fan or HEPA filter.
- Seamless chamber, with rounded interior corners makes cleaning easy.
- Removable shelves are non-tip.
- Sealed inner glass door allows chamber viewing.
- Temperature range programmable from 4 °C above ambient to 50 °C.
- Infrared CO2 Sensor, with auto self-referencing function.
- CO2 range programmable from 0.2 to 20 %.
- Large, easy to read LCD display with LED backlight.
- Removable, seamless, stainless steel humidity reservoir.
- 25mm access port for cable pass-through etc.
- HEPA filtration for all incoming gasses.
- Large range of options allows you to configure each incubator for each task.
- Optional data capture and reporting for QA and verification purposes.
- 3 Year Warranty (extendable).

Introduction
Binder CB60 CO2 and multigas incubator from Wolflabs. The Binder CB series CO2 incubator is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A Binder CB series CO2 incubator can perform complex cultivation experiments as well as specific enviromental conditions.

Features and benefits
- Hot air sterilization at 180 °C, with sterilizable built-in CO2 sensor minimizes the risk of contamination
- Homogeneous temperature distribution thanks to Ventair air jacket system
- Stable pH-values thanks to drift-free CO2 IR sensor technology
- Saturated relative humidity up to 95 % RH
- Easy cleaning thanks to seamless, deep-drawn inner chamber
- Temperature range: room temperature plus 7 °C to 60 °C
- Humidity range: up to 95% RH
- Alternative O2 control ranges: 0.2-20 vol. % O2 or 10-95 vol. % O2 (O, GO versions)
- Auto-sterilization with hot air at 180°C
- Double-pan humidification system with condensation protection
- CO2 gas-mixing jet with Venturi effect 
- Hot-air sterilizable CO2 sensor with infrared technology
- Display via color LCD monitor
- Lockable door handle
- Tightly-sealed inner door made of tempered safety glass
- Seamless, deep-drawn inner stainless steel chamber
- 2 perforated stainless steel shelves
- Units are stackable with stacking adapter
- Troubleshooting system with visual and audible alarms
- Computer interface: Ethernet
- Internal data recording and USB interface
- Zero-voltage alarm contact

Discounts of over 35% - https://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Incubator CO2 cell/tissue culture Leec Mini CultureSafe T50 capacity 50l, no oxygen control, no disinfection, 24mm access port, single inner glass door, stainless steel chamber, datalogger, no humidity alert and monitoring package, with infra red CO2 sensor

Incubator CO2 cell/tissue culture Leec Mini CultureSafe T50S capacity 50l, no oxygen control, heat disinfection to 200°C, 24mm access port, single inner glass door, stainless steel chamber, datalogger, no humidity alert and monitoring package, with infra red CO2 sensor

Introduction
Binder CB160 CO2 and multigas incubator from Wolflabs. The Binder CB series CO2 incubator is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A Binder CB series CO2 incubator can perform complex cultivation experiments as well as specific enviromental conditions.

Features and benefits
- Temperature range: room temperature plus 7 °C to 60 °C
- Humidity range: up to 95% RH
- Alternative O2 control ranges: 0.2-20 vol. % O2 or 10-95 vol. % O2 (O, GO versions)
- Auto-sterilization with hot air at 180°C
- Double-pan humidification system with condensation protection
- CO2 gas-mixing jet with Venturi effect
- Hot-air sterilizable CO2 sensor with infrared technology
- Display via color LCD monitor
- Lockable door handle
- Tightly-sealed inner door made of tempered safety glass
- Seamless, deep-drawn inner stainless steel chamber
- 3 perforated stainless steel shelves
- Units are stackable with stacking adapter
- Troubleshooting system with visual and audible alarms
- Computer interface: Ethernet
- Internal data recording and USB interface
- Zero-voltage alarm contact

Introduction
Binder CB220 CO2 and multigas incubator from Wolflabs. The Binder CB series CO2 incubator is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A Binder CB series CO2 incubator can perform complex cultivation experiments as well as specific enviromental conditions.

Features and benefits
- Temperature range: room temperature plus 7 °C to 60 °C
- Humidity range: up to 95% RH
- Alternative O2 control ranges: 0.2-20 vol. % O2 or 10-95 vol. % O2 (O, GO versions)
- Auto-sterilization with hot air at 180 °C
- Double-pan humidification system with condensation protection
- CO2 gas-mixing jet with Venturi effect
- Hot-air sterilizable CO2 sensor with infrared technology
- Display via color LCD monitor
- Lockable door handle
- Tightly-sealed inner door made of tempered safety glass
- Seamless, deep-drawn inner stainless steel chamber
- 3 perforated stainless steel shelves
- Units are stackable with stacking adapter
- Troubleshooting system with visual and audible alarms
- Computer interface: Ethernet
- Internal data recording and USB interface
- Zero-voltage alarm contact

Discounts of almost 35% - https://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Incubator CO2 cell/tissue culture Leec Mini CultureSafe T50 capacity 50l, no oxygen control, no disinfection, 24mm access port, single inner glass door, stainless steel chamber, datalogger, no humidity alert and monitoring package, with infra red CO2 sensor 
Incubator CO2 cell/tissue culture Leec Mini CultureSafe T50S capacity 50l, no oxygen control, heat disinfection to 200°C, 24mm access port, single inner glass door, stainless steel chamber, datalogger, no humidity alert and monitoring package, with infra red CO2 sensor

New 48LGOLD, 48LSILVER, 170LGOLD and 170LSILVER CO2 incubators from GS Biotech have been added. 

Introduction
New HF90 CO2 and multigas incubator from Envair has been added. An Envair Lab CO2 incubator provides you with unsurpassed natural simulation to ensure optimum growth conditions for your culture at all time.

Features and benefits
- The validated overnight sterilization cycle ensures reliable destruction of germs that could interfere with your work and requires no extra work, such as removal of interior fittings. Mycoplasma is 100% eliminated in a routine disinfection cycle.
- The cleaning process is significantly simplified by Envair Lab’s unique, seamless, deep-drawn interior chamber, which reduces any areas where contamination could accumulate.
- All gas injection lines are filtered via HEPA filter to remove impurities and contaminants before being injected into the chamber. The HEPA filter is able to filter partciles larger than 0.3 at 99.998%.
- The auto-start function, which considerably simplifies the equipment’s operation, contains the incubator’s automatic start-up and the measuring system’s calibration.
- Three inner glass doors (HF-90) maintains stable climatic conditions, minimizes any changes to the humidity, heat and gas concentration, shortens recovery times significantly and also furthers reduces the risk of contamination.

Discounts of over 35% - https://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Incubator CO2 cell/tissue culture Leec CultureSafe P190 capacity 190l, no oxygen control, no disinfection, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor 
Incubator CO2 cell/tissue culture Leec CultureSafe P190D capacity 190l, no oxygen control, heat disinfection to 160°C, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor
Incubator CO2 cell/tissue culture Leec Mini CultureSafe P50 capacity 50l, no oxygen control, no disinfection, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor

Introduction
New CB170 CO2 and multigas incubators from Binder have been added. The Binder CB series CO2 incubator is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A Binder CO2 incubator of the CB series is up to even complex cultivation experiments or individual environments. 

Features and benefits
- Temperature range: ambient temperature plus 4 °C to 60 °C
- Humidity range: 90 to 95% RH
- CO2 control range: 0 to 20 vol% CO2
- O2 control range: 0.2 to 20 vol% O2 (O and GO versions)
- Alternative O2 control range: 10 to 95 vol% O2 (option for O and GO versions)
- Tried-and-tested anti-contamination concept with 180 °C hot air sterilization
- Hot-air sterilizable CO2 sensor with single-beam infrared technology
- CO2 gas-mixing jet with Venturi effect
- Intuitive touchscreen controller
- Internal data recording, can be read out in open format via USB interface
- Optimized double-pan humidification system with condensation protection
- 170 liters of extra space in the interior while maintaining the same footprint
- Stacking height of just 1.80 m for easy use of the top unit
- Fail-safe CO2 automatic diagnosis system for protecting the pH of cell cultures
- DuoDoor system: Unit door and glass door can be opened with one handle
- Lockable door handle
- Computer interface: Ethernet
- Zero-voltage alarm contact
- Tightly sealed inner door made of tempered safety glass
- Perforated shelves, stainless steel
- Units are stackable with stacking adapter

"Hi Samantha and Becca,
Thank you so much for your help in chasing this order. Here is the message for your director:
“I would like to thank Samantha and Becca from Wolflabs for their help in ensuring the timely delivery of a LEEC PL3-FFM incubator. They were a great help in chasing the order and ensuring that it arrived in time for the Animal and Plant Health Agency (APHA) inspection we are having tomorrow. Thanks to their help our insect rearing facility is now ready for inspection.”
Best wishes,
Toby"

Introduction
PHC Europe/Sanyo/Panasonic MCO-170AIC-PE Biomedical CO2 incubator from Wolflabs. 

Features and benefits
- The incubator’s Dual IR sensor and P.I.D control enables ultra-fast CO2 recovery without overshoot, even following multiple door-openings.
- With a unique antibacterial coating, the ‘dew stick’—controlled by Peltier technology— condenses water on its surface, which then drips into the humidifying pan, preventing unwanted condensation in the chamber and possible contamination.
- The exclusive inCu-saFe copper-enriched stainless steel alloy interor offers the germicidal properties of copper and the durability of stainless steel.
- The optional, isolated, SafeCell UV lamp decontaminates circulating air and water in the humidifying pan, without harming cultured cells.
- Achieves accurate, uniform, and highly responsive temperature control within the chamber, providing exceptional uniformity and rapid recovery after door-openings.

Discounts of almost 35% - https://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Incubator CO2 cell/tissue culture Leec CultureSafe P190 capacity 190l, no oxygen control, no disinfection, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor.
Incubator CO2 cell/tissue culture Leec CultureSafe P190D capacity 190l, no oxygen control, heat disinfection to 160°C, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor.
Incubator CO2 cell/tissue culture Leec Mini CultureSafe P50 capacity 50l, no oxygen control, no disinfection, 24mm access port, single inner glass door, stainless steel chamber, no datalogger, no humidity alert and monitoring package, with infra red CO2 sensor.

 

New CellXpert C170i and C170 CO2 and multigas incubators from Eppendorf have been added.

Introduction
LEEC GA2000 CO2 incubator from Wolflabs.

Features and benefits 
- Stainless steel outer cabinet for longer life. 
- Ultra smooth stainless steel chamber helps contamination control.
- Adjustable levelling feet.
- Two cable access ports.
- Bright LED digital displays for temperature and CO2.
- Comprehensive alarm system (audible and visual) monitors all critical functions.

Discounts of almost 35% - https://www.wolflabs.co.uk/laboratory-products/incubator-co2-and-multigas

Introduction
Binder CB220 CO2 incubator from Wolflabs.

Features and benefits 
- Hot air sterilization at 180 °C, with sterilizable built-in CO2 sensor which minimizes the risk of contamination.
- Easy cleaning thanks to seamless, deep-drawn inner chamber. 
- 3 perforated stainless steel shelves.
- Internal data recording and USB interface.
- Tightly-sealed inner door made of tempered safety glass.

Introduction
Binder C170 CO2 incubator from Wolflabs. The C170 incubator is suitable for routine cell cultivation applications. It is free from contamination due to 180 °C hot-air sterilization and reliable pH stability thanks to the drift-free infrared CO2 measurement system.

Features and benefits
- Humidity range: up to 95 % RH.
- Humidification system with condensation protection.
- Tightly-sealed inner door made of tempered safety glass.
- Seamless, deep-drawn inner stainless steel chamber.
- Units are stackable with stacking adapter.
- Zero-voltage alarm contact.

New CellXpert C170i CO2 incubator from Eppendorf / New Brunswick Scientific has been added.

Features and benefits
- Intuitive touch screen.
- Easy access USB ports.
- Changeable door hinge position.
- Heavy duty shelves.

Introduction
LEEC CultureSafe T190 CO2 incubator from Wolflabs. All LEEC CultureSafe CO2 incubators are fitted with a premium quality state of the art drift free infra red CO2 sensor. This ensures accurate CO2 measurement at all instances in time and total peace of mind that your samples are culturing at the correct % CO2 level all the time. This eradicates the need for any additional auto-referencing/zeroing of the CO2 sensor which is sometimes necessary on other manufacturers incubators to stop drifting of CO2 calibration and carries the heavy the risk of contamination introduction into the incubator each time the auto-referencing/zeroing is performed.

Features and benefits
- Fan-less design.
- Easy to clean.
- High capacity.
- No tools required.

Introduction
GS Biotech 48LGOLD CO2 incubator from Wolflabs. 

Features and benefits
- Seamless chamber, with rounded interior corners makes cleaning easy.
- Removable shelves are non-tip.
- Sealed inner glass door allows chamber viewing.

Introduction
PHC Europe/Sanyo/Panasonic Biomedical CO2 incubator from Wolflabs. This incubator provides precise control of CO2 concentration and accurate highly responsive temperature control within the chamber making it ideal for the laboratory.

Features and benefits 
- Compact design.
- Stackable design.
- Patient-specific.
- Active background decontamination.

Introduction
Binder CB220 CO2 incubator from Wolflabs. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A Binder CB220 CO2 incubator can perform complex cultivation experiments as well as specific enviromental conditions.

Features and benefits
- Maximum usable space with minimal footprint and excellent ease of use.
- Minimum risk of contamination thanks to uncompromising hot-air sterilization
- Fanless, easy-to-clean hygienic interior.
- Stable pH values thanks to drift-free CO2 IR sensor technology.
- Low evaporation of the medium due to high levels of humidity and quick recovery time.

Introduction
Thermo Scientific Forma Series 3 CO2 incubator from Wolflabs. The Forma Series 3 has durable triple-wall construction which gives the incubator optimal temperature uniformity. It also provides outstanding thermal stability for your valuable cell cultures to protect against ambient temperature swings and unexpected power outages that can ruin your cultures.

Features and benefits
- Fan-assisted directed airflow.
- Sturdy stainless steel shelves.
- Chamber access port.
- Ergonomically designed outer door handle.

Introduction
Binder CB60 CO2 incubator from Wolflabs. The CB60 is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth.

Features and benefits
- Maximum usable space with minimal footprint and excellent ease of use.
- Minimum risk of contamination thanks to uncompromising hot-air sterilization.
- Fanless, easy-to-clean hygienic interior.
- Low evaporation of the medium due to high levels of humidity and quick recovery time.

Introduction
Thermo Scientfic Forma Steri-Cycle i160 Dual Chamber CO2 incubator from Wolflabs. The Forma Steri-Cycle i160 Dual Chamber represents a new era in advanced incubator design for sensitive cultures like stem and primary cells in leading research, pharmaceutical and clinical laboratory applications.

Features and benefits
- Easy-to-clean.
- 2 year parts and labor warranty.
- Complete contamination control.
- Adjustable, perforated shelving.
- Robust design.

Introduction
Forma Steri-Cult CO2 and multigas incubator from Wolflabs. Forma Steri-Cult brings leading edge technology into your lab, combining the most advanced components available into a single incubator.

Features and benefits
- Maximum contamination control.
- Active humidification system.
- Largest stackable culturing capacity available.
- Designed for easy cleaning.

Introduction
Binder CB220 CO2 and multigas incubator from Wolflabs. 

Features and benefits
- Maximum usable space with minimal footprint and excellent ease of use.
- Minimum risk of contamination thanks to uncompromising hot-air sterilization.
- Fanless, easy-to-clean hygienic interior.
- Low evaporation of the medium due to high levels of humidity and quick recovery time.

New CO2 and multigas incubators from Thermo Scientific have been added.

Introduction
Forma Series II 3110 CO2 and multigas incubator from Wolflabs.

Features and benefits
- Total contamination control minimizes the risk of airborne contaminants entering the incubator upon door openings, with a validatable in-chamber HEPA air filtration system, maintaining your cultures in cleanroom-like Class 100 air quality conditions.
- Can be adapted to your specific requirements.
- Maximum thermal stability and quick recovery are assured with a unique triple wall construction, providing superior protection against temperature loss in the event of an unexpected power outage.

Introduction
New MCO-170AC-PE CO2 and multigas incubators from PHC Europe/Sanyo/Panasonic Biomedical have been added.

Features and benefits
- Precise control & intelligent monitoring.
- Effortless cleaning and maintenance.
- Precise & regulated environment.

New CelCulture CO2 and multigas incubators from Esco have been added. 

Introduction
New CB260 CO2 incubators from Binder have been added.

Features and benefits
- Maximum usable space with minimal footprint and excellent ease of use.
- Minimum risk of contamination thanks to uncompromising hot-air sterilization.
- Easy to clean hygienic interior.
- Low evaporation of the medium due to high levels of humidity and quick recovery time.

Introduction
Binder CB-S170 Solid Line CO2 incubator from Wolflabs. The CB-S170 Solid Line is suitable for routine cell cultivation applications. It is free from contamination due to the 180 °C hot-air sterilization and a reliable pH stability thanks to the drift-free infrared CO2 measurement system.

Features and benefits
- LCD to display temperature and CO2 along with additional information and alarms.
- Tightly sealed inner door made of tempered safety glass.
- Seamless stainless steel inner chamber.
- Units are stackable with stacking adapter.
- Zero-voltage alarm contact.
- Internal data logger.

New 220L Gold CO2 and multigas incubators from GS Biotech Limited have been added.

Introduction
GS Biotech 14LGOLD CO2 and multigas incubator from Wolflabs.

Features and benefits
- Seamless chamber, with rounded interior corners makes cleaning easy.
- Removable shelves are non-tip.
- Sealed inner glass door allows chamber viewing.
- Large, easy to read LCD display with LED backlight.
- HEPA filtration for all incoming gasses.

Introduction
LEEC GA2010 CO2 incubator from Wolflabs.

Features and benefits
- Steel outer cabinet for longer life.
- Ultra smooth stainless steel chamber.
- Stainless steel perforated shelves.
- Adjustable front levelling feet.
- Bright LED displays for temperature and CO2.
- Fan assisted chamber for precise culturing conditions.

Introduction
Eppendorf / New Brunswick Scientific CellXpert C170 CO2 incubator from Wolflabs. 

Features and benefits
- Intuitive touch screen.
- Easy access USB ports.
- Robust new handle design for comfortable, low stress door opening.
- Smart gas control for fast recovert and cost savings.
- Mutiple temperature sensors.

Introduction
New CB56 CO2 incubator from Binder has been added.

Features and benefits
- Reduced contamination risk due to high performance hot air sterilization.
- Ensures optimal cell growth.
- High humidity reduces medium evaporation.
- Intuitive touchscreen controller.
 

New MCO-50AIC-PE and MCO-50M-PE CO2 incubators from PHC Europe have been added.

Introduction
Benchmark Scientific SureTherm CO2 incubator series from Wolflabs. 

Features and benefits
- Internal microscope
- Large LED monitor
- Oxygen control
- Heated door & frame
- Split inner door
- High heat decontamination