Ovens - Materials Testing

Special Offer - Ovens - Materials Testing

Discounts of almost 30% - https://www.wolflabs.co.uk/laboratory-products/ovens-materials-testing

Materials testing oven Binder FP115 115l capacity, no advanced programmability, no humidity control, fan, maximum temperature 300°C, voltage 230V 1N, 50/60Hz.

New Genlab material testing ovens from Wolflabs

New MTO material testing oven range from Genlab have been added.

Special Offer - Ovens - Materials Testing

Prices starting at £1541 - http://www.wolflabs.co.uk/laboratory-products/ovens-materials-testing

Binder materials testing oven from Wolflabs

Introduction
Binder M series materials testing ovens from Wolflabs. With a maximum temperature of 300 °C and comprehensive programming options, the M series from Binder is ideally suited for material and aging testing. The high-performance fan ensures fast heating.

Features and benefits
- Electronically controlled APT.line preheating chamber assuring temperature accuracy and reproducible results
- Temperature range from 5 °C above ambient temperature to 300 °C
- MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
- User-friendly LCD screen
- Easy-to-read menu guide
- Integrated electronic chart recorder
- Variety of options for the graphic display of process parameters
- Real-time clock
- Adjustable ramp function via program editor
- Program-controlled ventilation flap
- High air-exchange rate through high-performance fan
- Adjustable fan speed
- Exhaust duct Ø 50 mm
- Temperature safety device class 2 (DIN 12880) with visual alarm
- Printer and communication interface RS 422 for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM DataControlSystem software
- Units up to 115 liters are stackable
- 2 chrome-plated racks included
- Binder test confirmation

Special Offer - Ovens - Materials Testing

Prices starting at £1242 - http://www.wolflabs.co.uk/laboratory-products/ovens-materials-testing

Binder materials testing oven from Wolflabs

Introduction
A Binder material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.

Features and benefits
- Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
- Temperature range from 5 °C above ambient temperature to 300 °C
- MP controller with 2 programs with 10 sections each, or alternatively 1 program with 20 sections
- The time of an individual program step can be set to max. 99.59 hours or 999.59 hours. This adjustment applies to all program sections
- Integrated weekly program timer with real-time function
- Adjustable ramp function via program editor
- Digital temperature setting with an accuracy of one degree
- Adjustable fan speed
- Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm
- Elapsed time indicator Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
- RS 422 interface for use with APT-COM™ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
- Units up to 115 liters are stackable
- 2 chrome-plated racks included
- BINDER test confirmation

Special offer - Ovens - Materials Testing

Prices starting at £1242 - http://www.wolflabs.co.uk/laboratory-products/ovens-materials-testing

Wolflabs Binder :: New product category 'Ovens - Materials Testing'

New product category ‘Ovens - Materials Testing’ added to the website along with a selection of Binder models. Models include: FP53, M53, M115, M240, M400, M720, FP115, FP240, FP400, and FP720.