Special Offer - Incubators - Cooled

Discounts of over 20% - https://www.wolflabs.co.uk/laboratory-products/incubators-cooled

Cooled incubator LMS 80 capacity 76l, non programmable controller, temperature range -10 degs C to 50 degs C, temperature variation +/- 0.5 degs C, not peltier cooled.

Clifton cooled Incubator from Wolflabs

Introduction
Clifton NE7-240S cooled incubator from Wolflabs.

Features and benefits
- Runs continuously at a set temperature.
- Offers three programs, with up to six temperatures and time time segments in each program.
- Data logging to USB.
- Program controls of fan speed, exhaust air flap, temperature, time, immediate start, delay start, future start.

LEEC cooled incubator from Wolflabs

Introduction
LEEC P33C cooled incubator from Wolflabs. 

Features and benefits
- PID Microprocessor with digital display.
- Digital overtemperature safety cutout.
- Stainless steel chamber with adjustable shelves.
- Efficient polyurethane foam insulation.
- Two 12mm access ports.
- Unique pulsed heating and cooling is very energy- efficient.
- Quiet hermetically sealed compressor, with air cooled condenser.
- Low wattage heaters are bonded to the outer wall of the chamber to eliminate ‘hot-spots’.
- Digital overtemperature safety cutout with visual alarm.
- Chamber is internally sparkfree.
- Insulation is CFC free.

New Clifton cooled incubators from Wolflabs

Introduction
New NE7-S cooled incubators from Clifton have been added. This series of Clifton cooled incubators feature precision temperature control with programming options providing consistent chamber temperatures. 

Features and benefits
- Temperature range: 0°C to 70°C ( 0°C to 47°C cooling range )
- Dual pt100 temperature probes
- Intuitive to use controls, illuminated LCD display, touch sensitive keypads with prompts.
- Run continuously at set temperature, delay start or commence to start on a date and time in the future.
- Offers 3 programs, up to 6 temperature and time segments in each program.
- Program control of fan speed, exhaust air flap, temperature, time, immediate start, delay start, future start.
- Data logging to USB.
- Auto diagnostics with sensor alarms.
- Power fail alarm, recording and resumption.
- High and low temperature alarm.
- Door opening sounder and alarm.
- Over temperature protection and sample protection.

Binder cooled incubator from Wolflabs

Introduction
Binder KB400 cooled incubator from Wolflabs. The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -5 °C to 100 °C. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide range of applications.

Features and benefits
- Temperature range: -5 °C to 100 °C
- APT.line preheating chamber technology
- Up to 30% lower energy consumption compared to the previous model
- Cooling with compressor cooling unit
- Door heating
- Adjustable fan speed
- Controller with time-segment and real-time programming
- Inner door made of tempered safety glass
- 2 stainless steel racks
- 4 casters, two with locking brakes
- Access port with silicone plug, 30 mm, left
- Class 3.1 independent temperature safety device (DIN 12880) with visual and acoustic alarm
- Computer interface: Ethernet

Binder cooled incubator from Wolflabs

Introduction
Binder KB240 cooled incubator from Wolflabs. The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -5 °C to 100 °C. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide range of applications.

Features and benefits
- Temperature range: -5 °C to 100 °C
- APT.line preheating chamber technology
- Up to 30% lower energy consumption compared to the previous model
- Cooling with compressor cooling unit
- Door heating
- Adjustable fan speed
- Controller with time-segment and real-time programming
- Inner door made of tempered safety glass
- 2 stainless steel racks
- 4 casters, two with locking brakes
- Access port with silicone plug, 30 mm, left
- Class 3.1 independent temperature safety device (DIN 12880) with visual and acoustic alarm
- Computer interface: Ethernet

Binder cooled incubator from Wolflabs

Introduction
Binder KT115 cooled incubator from Wolflabs. The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the KT series are state-of-the-art in application and protect the samples.

Features and benefits
- Safe and reproducible incubation conditions even at high environmental conditions
- Disinfection routine at 100 °C
- Energy efficient, environmentally friendly and secure
- Temperature range: 4 °C to 100 °C
- APT.line preheating chamber technology
-  Adjustable fan speed
- Electric cooling with Peltier module
- Controller with time-segment and real-time programming
- Display via LCD monitor
- Input via pushbutton/rotary knob
- Inner door made of tempered safety glass
- 2 stainless steel racks
- Stackable
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: Ethernet
- Data recording and USB interface

Binder cooled incubator from Wolflabs

Introduction
Binder KB53 cooled incubator from Wolflabs. The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -5 °C to 100 °C. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide range of applications.

Features and benefits
- Safe, reproducible incubation, even at high ambient temperatures
- Disinfection routine at 100 °C
- Temperature range: -5 °C to 100 °C
- APT.line™ preheating chamber technology
- Up to 30% lower energy consumption compared to the previous model
- Cooling with compressor cooling unit
- Adjustable fan speed
- Controller with time-segment and real-time programming
- Inner door made of tempered safety glass
- 2 stainless steel racks
- Stackable
- Class 3.1 independent temperature safety device (DIN 12880) with visual and acoustic alarm
- Computer interface: Ethernet

Binder cooled incubators from Wolflabs

Introduction
Binder KB23 cooled incubator from Wolflabs. The most versatile among the cooled incubators for microorganisms: The Binder KB series cooled incubator controls temperature ranges of -5°C to 100°C. With its comprehensive program functions, this cooled incubator offers a wide range of capabilities and delivers reproducible test results.

Features and benefits
- Temperature range: 0°C to 100°C
- APT.line™ preheating chamber technology
- Cooling with compressor cooling unit
- Adjustable fan speed
- Controller with time-segment and real-time programming
- Elapsed time indicator
- Inner door made of tempered safety glass
- 2 stainless steel racks
- Stackable
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: RS 422

Another happy Wolflabs customer

'Hello there Jenny
We cannot thank you enough for supporting us.
Attached is a thank you letter that you can display in the office.
Kindest Regards
Jo'