Special Offer - Hotplates

Prices starting at £189 - https://www.wolflabs.co.uk/laboratory-products/hotplates

Cole-Parmer - Stuart hotplates from Wolflabs

Introduction
Cole-Parmer - Stuart SD160 and CB160 hotplates from Wolflabs. General purpose, reliable hotplates with compact A4 footprint. These hotplates have microprocessor control of temperature allowing a calibrated scale to be printed around the control dial in ºC rather than an arbitrary 1 - 10 scale.

Features and benefits
- Choice of robust aluminium or chemically resistant ceramic tops
- Flashing "Hot" warning light to warn when top plate is too hot to touch
- Spillproof design which helps deflect spills away from the controls and the user
- Independent safety circuit to protect against overheating
- Microprocessor control for accurate temperature setting

Nickel-Electro hotplates from Wolflabs

Introduction
Nickel-Electro HP1 series of hotplates from Wolflabs. These analogue hotplates feature a generous working area, thermostatic control, with an illuminated on/of switch, heater and hot warning indicators. Featuring a hob surface overlaps the body to ensure that no spillages enter the controls. The hob is solid aluminium for excellent thermal properties and even heat distribution.

Features and benefits
- Accepts standard laboratory retort rods for scaffolding to be constructed.
- Solid aluminium top plate with excellent thermal properties.
- Hob overlaps the controls ensuring spillages do not ingress into controls.
- Hot warning indicator

Cole-Parmer - Stuart hotplate from Wolflabs

Introduction
Cole-Parmer - Stuart CP300 hotplate from Wolflabs. A heated glass ceramic plate mounted in a block of pure PTFE creates a powerful hotplate which is almost impervious to chemical attack, even by concentrated acids.

Features and benefits
- A completely new concept in hotplates
- PTFE construction with glass ceramic plate for exceptional resistance to chemical attack
- Ideal for acid digestions or trace metal analysis
- Separate control box connected with a PTFE coated lead

Cole-Parmer - Stuart hotplates from Wolflabs

Introduction
Cole-Parmer - Stuart CR300 hotplate from Wolflabs. Using a very efficient infra red heater of just 900W power this hotplate will boil 1 litre of water over 30% faster than a conventional ceramic hotplate of 1200W. Ideal for heating large volumes of liquid.

Features and benefits
- Very efficient heating saving time and energy
- Chemically resistant ceramic top
- "Hot" warning light for user safety

Cole-Parmer - Stuart hotplates from Wolflabs

Introduction
Cole-Parmer - Stuart CB500 and SD500 hotplates from Wolflabs. These large rectangular shaped hotplates are ideal for heating many smaller vessels simultaneously, e.g. in educational use where lots of students require their samples heated at the same time. An easy to use knob located on the front of the hotplate controls the top plate temperature. The robust side arms make the unit very easy to carry.

Features and benefits
- Choice of top plate material, metal or ceramic
- Large plate area ideal for heating multiple vessels
- Accommodates up to 30 x 100ml beakers

Special Offer - Hotplates

Prices starting at £210 - http://www.wolflabs.co.uk/laboratory-products/hotplates

Stuart hotplates from Wolflabs

Introduction
Stuart CB300 and SB300 hotplates from Wolflabs. Model CB300 has a glass ceramic top which has excellent chemical resistance and allows much higher plate temperature. Model SB300 has a robust aluminium/silicon alloy top plate which gives even plate temperature and will withstand the knocks of everyday use.

Features and benefits
- Choice of top plate material
- Large square plate area ideal for heating one large vessel or several smaller ones
- Accommodates vessels up to 10 litre capacity
- Hotplate temperature controlled by easy to use dial
- Fitted with a "Hot" warning light which will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains.

Stuart hotplates from Wolflabs

Introduction
Stuart US150 and UC150 hotplates from Wolflabs. Model UC150 has a glass ceramic top which has excellent chemical resistance. The surface is easy to clean and allows high plate temperatures for faster heating. Model US150 has a robust aluminium/silicon alloy top plate for excellent heat transmission. The top plate has a thin ceramic coating for added chemical resistance. A 700W element gives rapid heating and ensures even temperature distribution across the whole surface of the plate. 

Features and benefits
- LED temperature indicator
- Choice of glass ceramic or ceramic coated metal surface
- Hot warning light, remains active even when unplugged
- Compact design to save bench space
- Units can be stored on side, minimising required storage space
- Design allows retort base to slide underneath
- Compatible with SCT1 temperature controller

Special Offer - Hotplates

Discounts of over 35% - http://www.wolflabs.co.uk/laboratory-products/hotplates