Incubators - Plant Growth Cabinets News

Introduction
BINDER KBF & KBF PRO Plant Growth Chambers from WolfLabs
The BINDER KBF and KBF PRO series of plant growth chambers provide advanced climate control solutions for plant science, agricultural research, horticulture and controlled environment studies. Designed for reliable, repeatable results, these chambers offer precise regulation of temperature, humidity, light intensity and photoperiod — making them ideal for seed germination, growth trials, phenotyping and stress testing. With robust construction and intuitive controls, the KBF and KBF PRO series support both routine and demanding experimental workflows in laboratories and research facilities.

Features & Benefits
- Precise environmental control - Both KBF and KBF PRO chambers deliver accurate regulation of temperature and humidity, essential for reproducible plant growth experiments and climate response studies.
- Advanced lighting system - Integrated programmable light cycles with uniform illumination help replicate day/night and seasonal light conditions, supporting photoperiod research and optimised growth environments.
- Enhanced control interface (PRO models) - The KBF PRO series features advanced, user-friendly controllers with precise programme management and data logging — ideal for complex growth protocols and long-term studies.
- Uniform air circulation - Designed with efficient circulation systems to ensure consistent conditions throughout the chamber interior so that plant samples receive even temperature, humidity and light distribution.
- Robust build and safety features - BINDER’s metal construction, corrosion-resistant interiors and alarm systems ensure long-term reliability and protection against deviations from set parameters — critical for sensitive plant research.

Introduction
Medline Jeio Tech GC series of plant growth incubators from Wolflabs.
With a capacity of 300 or 1000 litres, the Jeio Tech GC plant growth chambers delivers an innovative performance of low and high temperature along with humidity control. This is attained by altering the humidification tank exterior to the chamber, giving a joined advantage for carrying out frequent tests.

Features and benefits
- 10 step programmable temperature, humidity, and illumination profiles and repeatable steps of up to 999 cycles
- Casters for easy mobility during installation or relocation
- Eco-friendly CFC-free refrigerant use
- Automatic shut off after overheat alarm and low and empty water level alarm

A large range of LEEC Incubators - Plant Growth Cabinets has been added to the website.

These include the following models: LT1201FL, LT601FL, PL2, PL3, PL33, SL2, and SL3

Wolflabs Binder :: Incubators - Plant Growth Cabinet, KBW 240, KBWF 240 and KBWF 720 added on to the website.

New 600P and 1200P plant growth cabinet incubators from LMS have been added.

Introduction
LEEC Plant Growth / Germination Cabinets are based upon the LEEC precision cooled incubators. They have internal lighting, digital tempearture cycling and digital light timers as standard to simulate day and night conditions.

Features and benefits
- All plant growth cabinets use the same temperature control systems as the cooled incubators on which they are based. Temperature performance can be marginally affected during the “lights on” cycle due to a small amount of heat from the lights radiating into the growth chamber. The temperature is cycled using a 24 hour timer.
- All models are fitted with a digital 24 hour timer to control the day/night cycle of lights on and off. Each incubator door is fitted with one pair of white fluorescent tubes. These give a lighting intensity of approximately 3000 lux on each shelf. For higher lighting intensities and specialised applications, extra lights or UV lamps can be added. All lights are mounted in the outer door which is vented at the top and bottom. This means that the unwanted heat can escape into the laboratory. Cabinets fitted with four or more lights in each door also have a small extract fan in the door to help remove heat. This helps to maintain stable control, especially at lower operating temperatures.

Introduction
Binder KBW240 plant growth cabinet from Wolflabs. The Binder KBW series climate chamber with illumination achieves homogeneous light distribution and ensures consistent temperature conditions with its natural illumination.

Features and benefits
- Constant and gentle circulation of air through large-surface side walls even under a full load
- Homogeneous climate conditions throughout all specimens
- Flexible positioning and fully removeable illumination cassettes
- Excellent light uniformity for all specimens on the entire shelf
- Different light spectra can be used
- Powerful compressor cooling system with large power reserves for lighting applications
- No freezing thanks to double evaporator plate
- Carefully measured cooling

Introduction
LMS series 4 plant growth cabinets from Wolflabs. The LMS Series Four Cooled Incubator is a reliable and accurate temperature controlled cabinet (-10°C to +50°C) which has proved its worth over many years in laboratories both in the UK and overseas. The design of the purpose built incubator facilitates the addition of optional extras to provide greater flexibility for individual use, making it suitable for a wide range of applications.

Features and benefits
- Digital control with digital readout
- Fan assisted air circulation via premixing chamber
- Full PI.D. heating control to ensure stable internal temperatures
- Pre-set 70°C safety cutout for total cabinet protection
- Electronics RF and TV suppressed
- Hermetically sealed refrigeration system
- Self-evaporating condensate drip-tray
- Automatic defrost
- Door lock
- RS 232 interface
- Controls easy to read and simple to use
- Temperature range: -10°C to +50°C (excluding interior illumination and double glazed door) with average variation of +/- 0.5°C and fluctuation of 0.1 °C with average workload
- Temperature set by direct reading digital controller
- Indicators for mains, heating and high temperature safety cutout

Introduction
Sanyo / Panasonic MLR 352 and MLR 352H plant growth cabinets from Wolflabs. The wide variety of temperatures and lighting patterns that are essential in plant research can now be accurately reproduced and controlled with the MLR 352/352H. 

Features and benefits
- Microprocessor PID and Refrigeration Capacity Control eliminate temperature fluctuations and thereby improve temperature control. This allows superior precision experiments plus energy and electricity savings.
- Programmable temperature function is perfect for temperature cycle and vernalization treatment research.
- 12-step programs x 10 patterns can be memorized.
- Selectable clock mode or timer mode.
- Multiple programs can be linked (Join mode).
- Starting day and time of operation can be programed.
- Operation data of approximately last 2 weeks (6-minute intervals) can be automatically recorded.
- Data can be retrieved on the control panel.
- Data can be transmitted to a PC (CSV data via Ethernet (LAN) Interface MTR-L03 or RS232C/RS485 Interface MTR-480).
- Easy calibration: temperature and humidity can be calibrated easily from the control panel.
- Small and lightweight, high-molecular membrane-type humidity sensor also boasts a high degree of accuracy and reproducibility. Of the newest high-molecular membrane type, the humidity sensor accurately measures chamber humidity (MLR-352H only).

Introduction
Binder KBW400 plant growth cabinet from Wolflabs. The Binder climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this growth chamber to create constant lighting and temperature conditions.

Features and benefits
- Temperature range: 0 °C to 70 °C
- Temperature range with light: 5 °C to 60 °C
- 3 positionable illumination cassettes, each with 5 fluorescent tubes
- APT.line preheating chamber technology
- Adjustable fan speed
- Intuitive touchscreen controller with time-segment and real-time programming with internal data recording
- 3 stainless steel racks
- Access port with silicone plug, 30 mm, left
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: Ethernet
- Door heating
- Tight-sealing inner door made of safety glass (ESG) with special timeless coating

Introduction
Binder KBWF240 plant growth cabinet from Wolflabs. The Binder climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this climate chamber to create constant lighting and temperature conditions.

Features and benefits
- Patented lighting system ensures homogeneous light distribution
- Flexible positioning of illumination cassettes, three different light spectra, individually selectable
- Pressure humidification with fast response times
- Temperature range: 0 °C to 70 °C
- Temperature range with light: 10 °C to 60 °C
- Humidity range: 10 % to 80 % RH
- 2 positionable illumination cassettes, each with 5 fluorescent tubes
- APT.line preheating chamber technology
- Adjustable fan speed
- Humidity regulation with capacitative humidity sensor and vapor humidification
- Controller with time-segment programming
- Display via color LCD monitor
- Tight-sealing inner door made of safety glass (ESG) with special timeless coating
- 2 stainless steel racks
- Access port with silicone plug, 30 mm, left
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: Ethernet
- Door heating

Introduction
Binder KBW720 plant growth cabinet from Wolflabs. The Binder climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this growth chamber to create constant lighting and temperature conditions.

Features and benefits
- Temperature range: 0 °C to 70 °C
- Temperature range with light: 10 °C to 60 °C
- 3 positionable illumination cassettes, each with 5 fluorescent tubes
- APT.line preheating chamber technology
- Adjustable fan speed
- Intuitive touchscreen controller with time-segment and real-time programming with internal data recording
- 3 stainless steel racks
- Access port with silicone plug, 30 mm, left
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: Ethernet
- Door heating
- Tight-sealing inner door made of safety glass (ESG) with special timeless coating

Introduction
Binder KBWF720 plant growth cabinet from Wolflabs. The Binder climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this climate chamber to create constant lighting and temperature conditions.

Features and benefits
- Temperature range: 0 °C to 70 °C
- Temperature range with light: 10 °C to 60 °C
- Humidity range: 10 % to 80 % RH
- 3 positionable illumination cassettes, each with 5 fluorescent tubes
- APT.line preheating chamber technology
- Adjustable fan speed
- Humidity regulation with capacitative humidity sensor and vapor humidification
- Controller with time-segment programming
- Display via color LCD monitor
- Tight-sealing inner door made of safety glass (ESG) with special TIMELESS coating
- 3 stainless steel racks
- Access port with silicone plug, 30 mm, left
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: Ethernet
- Door heating

Introduction
New 600P and 1200P plant growth cabinets with programmable interior lights from LMS have been added. The LMS Series Four Cooled Incubator is a reliable and accurate Temperature controlled cabinet (-10°C to +50°C) which has proved its worth over many years in laboratories both in the UK and overseas. The design of the purpose built incubator facilitates the addition of optional extras to provide greater flexibility for individual use, making it suitable for a wide range of applications.

Features and benefits
- Digital control with digital readout
- Fan assisted air circulation via premixing chamber
- Full PI.D. heating control to ensure stable internal temperatures
- Pre-set 70°C safety cutout for total cabinet protection
- Electronics RF and TV suppressed
- Hermetically sealed refrigeration system
- Refrigeration isolation switch
- Self-evaporating condensate drip-tray
- Automatic de-frost
- Variable over-temp alarm
- Doorlock
- RS 232 interface
- Controls easy to read and simple to use
- Temperature range: -10°C to +50°C (excluding interior illumination and double glazed door) with average variation of +/- 0.5°C and fluctuation of 0.1 °C with average workload
- Temperature set by direct reading digital controller
- Indicators for mains, heating and high temperature safety cutout

Introduction
LEEC PL33 plant growth incubator from Wolflabs.

Features and benefits
- The temperature is cycled using a digital 24 hour timer as standard.
- Digital over and under temperature protection and alarms are fitted as standard to all models.
- The chambers are fan assisted for optimum temperature performance and stability, which in turn provides reliable, accurate storage for samples. 
- All incubators are fitted with a digital 24 hour light timer to control the day / night light cycle. 

New 1200NP plant growth cabinet from LMS has been added.

Features and benefits
- Controls easy to read and simple to use.
- Automatic defrost.
- Door lock.
- Self-evaporating condensate drip-tray.
- Indicators for mains, heating and high temperature safety cutout.
- Hermetically sealed refrigeration system.