Incubators - Stability Chambers

Wolflabs is currently the public sector's top supplier for this range of products through framework agreement LAB5028 LU. A comprehensive range of stability chambers with capacities from 102 to 1020l, with low pressure steam, salt solution or ultrasonic humidity control types, with and without lighting controller and UV lighting, minimum temperature from 0 to 26°C, maximum temperature from 50 to 70°C from Binder and LEEC.

  • 16 matches | ?
    Reset
    Link To This Page
  • ? Price £
    0 - 4999.99 (2)
    5000 - 9999.99 (6)
    10000 - 14999.99 (3)
    15000 - 19999.99 (4)
    20000 - 24999.99 (1)
  • ? Manufacturer
    Binder (10)
    LEEC (6)
  • ?Capacity / l
    0 - 249 (8)
    250 - 499 (3)
    500 - 749 (4)
  • ?Humidity generation system
    Low pressure steam (10)
    Salt Solution (4)
    Ultrasonic fine mist (2)
  • ?Lighting controlled
    No (12)
    Yes (4)
  • ?UV lighting
    No (12)
    Yes (4)
  • ?Minimum temperature / °C
    0 (10)
    5 (4)
    26 (2)
  • ?Maximum temperature / °C
    50 (2)
    60 (4)
    70 (10)

Welcome to our Incubators - Stability Chambers section. I can help you with what you need.

Help Me 
Sort:
Back to Top Link
Image


Catalogue no.


Manufacturer


Model


Capacity l? Humidity generation system ? Lighting controlled ? UV lighting ? Minimum temperature °C? Maximum temperature °C? Offer price ? Quantity


Special Offer
LEEC SFC2 150 Salt Solution No No 26 60 £3,613.19
Special Offer
LEEC SFC2C 150 Salt Solution No No 5 60 £4,596.34
Special Offer
LEEC SFC3 320 Salt Solution No No 26 60 £5,202.22
Special Offer
LEEC SFC3C 320 Salt Solution No No 5 60 £6,185.35
Special Offer
LEEC SFC2C/RH 150 Ultrasonic fine mist No No 5 50 £7,218.04
Special Offer
LEEC SFC3C/RH 320 Ultrasonic fine mist No No 5 50 £8,805.27
Special Offer
Binder KBF115 102 Low pressure steam No No 0 70 £8,968.26
Special Offer
Binder KBFP240 247 Low pressure steam Yes Yes 0 70 £12,642.23
Special Offer
Binder KBFLQC720 700 Low pressure steam Yes Yes 0 70 £19,620.29
Binder KBFS 240 247 Low pressure steam No No 0 70 £6,769.91
Binder KBFS 720 700 Low pressure steam No No 0 70 £9,253.38
Binder KBF240 247 Low pressure steam No No 0 70 £10,814.03
Binder KBF720 700 Low pressure steam No No 0 70 £13,741.87
Binder KBF1020 1020 Low pressure steam No No 0 70 £15,458.62
Binder KBFP720 700 Low pressure steam Yes Yes 0 70 £16,391.93
Binder KBFLQC240 247 Low pressure steam Yes Yes 0 70 £18,043.82


Back to Top Link
  • New Binder stability chambers from Wolflabs

    New Binder stability chambers from Wolflabs

    Product update

    New KBFP240, KBFP720, KBFLQC240 and KBFLQC720 stability chambers from Binder have been added.

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Suddaby 25-Jun-2017
  • New Binder stability chambers from Wolflabs

    New Binder stability chambers from Wolflabs

    Product update

    Introduction
    New KBF stability chambers from Binder have been added. Constant climate chambers with large temperature / humidity range.

    Features and benefits
    - Temperature range: 0 °C to 70 °C
    - Humidity range: 10 % to 80 % RH
    - APT.line™ preheating chamber technology
    - Humidity regulation with capacitive humidity sensor and vapor humidification
    - Inner chamber made of stainless steel
    - Intuitive touchscreen controller with time-segment and real-time programming with internal data recording
    - Tight-sealing inner door made of safety glass (ESG) with special TIMELESS coating
    - 2 stainless steel racks
    - Access port with silicone plug, 30 mm, left
    - 4 stable castors, two with brakes, from 240 liters
    - Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
    - Computer interface: Ethernet
    - Door heating

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Suddaby 01-May-2017
  • Binder stability chamber incubator from Wolflabs

    Binder stability chamber incubator from Wolflabs

    Product update

    Introduction
    Binder KBF LQC series stability chamber incubators from Wolflabs. The special advantage of BINDER KBF LQC series: the patented photometry for photostability testing. Two spherical 3D ball-type sensors capture visible light intensity and UV light intensity – if the desired light dosage is achieved, it switches off automatically.

    Features and benefits
    - Electronically controlled APT.line preheating chamber and refrigerating system assuring temperature accuracy and reproducible results
    - 2 variable positioned illumination cassettes with Binder Q1B Synergy Light for unique homogenous light distribution
    - Illumination is specified for stability in accordance with ICH guideline Q1B, option 2
    - Light Quantum Control LQC, precise measurement and integration of light intensity and ultraviolet light intensity directly at the sample location, automatic deactivation after reaching the wanted light dosage
    - Temperature range 0 °C to 70 °C (without illumination and humidity)
    - Temperature range 10 °C to 60 °C (with illumination and humidity)
    - Humidity range 10 % to 80 % RH (without illumination)
    - Humidity range 10 % to 75 % RH (with illumination)
    - MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
    - User friendly LCD screen
    - Easy-to-read menu guide
    - Integrated electronic chart recorder
    - Variety of options for the graphic display of process parameters
    - Real time clock
    - Electronically controlled humidification and dehumidification system with capacitive humidity sensor suitable for stability tests according to ICH guideline Q1A (R2)
    - Inner glass door with sealing
    - Independent adjustable temperature safety device class 3.1 (DIN 12880), with visual and audible temperature alarm
    - Access port with silicone plug Ø 30 mm, left side
    - Safety connection kit for water supply and drainage, including water hose, total length 6m
    - Ethernet interface for APT-COM DataControlSystem software
    - 2 stainless steel racks
    - Binder test confirmation

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Suddaby 28-Nov-2016
  • Binder stability chamber incubator from Wolflabs

    Binder stability chamber incubator from Wolflabs

    Product update

    Introduction
    Binder KBF P series stability chamber incubators from Wolflabs. The Binder KBF P, equipped with ICH-compliant illumination, is the expert for photostability testing and provides clear and meaningful test results according to ICH guideline Q1B, Option 2. At the same time, the variable position illumination cassettes with BINDER Q1B Synergy Light ensure homogeneous lighting conditions.

    Features and benefits
    - Constant and gentle circulation of air through large-surface side walls even under a full load
    - Homogeneous climate conditions throughout test specimens
    - ICH-compliant illumination with Binder Q1B Synergy Light 
    - Removable illumination cassettes
    - Direct connection to the domestic water system
    - Convenient water treatment with Binder pure aqua service 
    - Sewage pump for discharges up to 1m in height
    - Vapor pressure humidification for fast response times
    - Drift-free, capacitive humidity sensor
    - Short recovery time after door opening
    - Powerful compressor cooling system for ambient temperatures up to 32 °C
    - No freezing, thanks to double evaporator plate
    - Ethernet interface
    - Access port diameter 30mm
    - Casters from 240l volume
    - Inner glass door with seal and double outer door seal
    - Door heated against condensation
    - 25 program memory
    - Digital continuous-line recorder for monitoring limits
    - Alarm function
    - GLP/GMP, IQ, OQ, PQ, DQ FDA-compliant software APT-COM 
    - Years of proven and recognized validation and documentation materials

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Suddaby 01-Aug-2016
  • Binder stability chamber incubator from Wolflabs

    Binder stability chamber incubator from Wolflabs

    Product update

    Introduction
    The KBF series is ideal for standard-compliant work according to ICH guidelines. As an inexpensive alternative to using multiple types of climate chambers, the Binder constant climate chambers can be used for a number of applications.

    Features and benefits
    - Temperature range: 0 to 70 °C
    - Humidity range: 10 to 80 % RH
    - APT.line preheating chamber technology
    - Humidity regulation with capacitive humidity sensor and steam humidification
    - Controller with time-segment programming
    - Tightly sealed inner door made of tempered safety glass
    - 2 stainless steel racks
    - Access port with silicone plug, 30 mm, left
    - 4 stable castors, two with brakes, from KBF 240
    - Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
    - Computer interface: Ethernet
    - Door heating

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Suddaby 26-May-2016
  • LEEC stability chambers from Wolflabs

    LEEC stability chambers from Wolflabs

    Product update

    Introduction
    All cabinets have stainless steel interiors fitted with adjustable shelves. All SF models have sealed chambers making them suitable for humidities up to 98%. SF models can have an outer door heater (extra cost option) to demist the inner glass doors. CFC-free polyurethane insulation provides very efficient thermal stability in all models. A 12mm access port is provided as standard. Monitoring and control of both heating and cooling functions is performed with great accuracy, and achieves typical temperature stability of ±0.5°C. The microporcessor based digital display allows the temperature performance to be easily verified. A digital over temperature safety cut out is fitted to all models. Salts-type SF models rely on forced evaporation from trays containing known saturated salt solutions. This is a simple and reliable method of humidity control.

    Features and benefits
    - Tried and trusted technology.
    - Simple to use.
    - Available as "heat only" or "heat and cool".

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers LEEC David Suddaby 01-Apr-2016
  • New Binder stability chamber incubator from Wolflabs

    New Binder stability chamber incubator from Wolflabs

    Product update

    New KBF1020 stability chamber incubator from Binder has been added.

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Suddaby 26-Oct-2015
  • Special Offer - Incubators - Stability Chambers

    Special Offer - Incubators - Stability Chambers

    Special offers

    Discounts of almost 20% - http://www.wolflabs.co.uk/laboratory-products/incubators-stability-chambers

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Child 13-May-2015
  • Special offers - Binder stability chamber

    Special offers - Binder stability chamber

    Special offers

    An entry level stability chamber from Binder

    9020-0139-Offer - Wolf special offer - Stability chamber Binder KBF115 controllable for temperature and humidity - 115L capacity OFFER ENDS 24-12-2014
     

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Child 29-May-2014
  • Wolflabs Binder :: Stability Chambers – New products added to the website.

    Wolflabs Binder :: Stability Chambers – New products added to the website.

    Product update

    Wolflabs Binder :: Stability Chambers – New products added to the website. Models include; 9020-0244, 9020-0246, 9020-0248 and 9020-0249.

    Product category Manufacturer Wolf Staff Date
    Incubators - Stability Chambers Binder David Suddaby 13-Jan-2013

Help / Quotation Request Form

Please fill in the boxes below to request help from a technical specialist.

Your email address:
Telephone number:
Name:
Company:
Type of equipment:
Your message



Contact Wolf Laboratories - Maintenance and Repair

Please provide the following contact information and complete as many fields as possible. Alternatively call our Service Team on 01759 301142 and select option 3.

Your email address:
Telephone number:
Fax number:
Name:
Company:
I am looking for:
Type of equipment:
Manufacturer(s):
Number of units:
Catalogue Number:
Model Number:
Serial Number(s):
Comments