Item shown is representative of range - Catalogue No.:14LGOLD

Item shown is representative of range - Catalogue No.:14LGOLD

GS Biotech Limited - 14LGOLD

Stock Code: 14LGOLD

GS Biotech special offer - Incubator CO2 cell/tissue culture GS Biotech 14LGOLD, capacity 14l, no oxygen control, no disinfection routine, 25mm access port, single inner glass door, stainless steel chamber, datalogger, no humidity alert and monitorin...

read more

List Price: Offer Price: Quantity:
£3,686.00 £2,295.00
List Price: £3,686.00
Offer Price: £2,295.00
Quantity:
Manufactured in uk3 Years WarrantyDelivery Time

GS Biotech special offer - Incubator CO2 cell/tissue culture GS Biotech 14LGOLD, capacity 14l, no oxygen control, no disinfection routine, 25mm access port, single inner glass door, stainless steel chamber, datalogger, no humidity alert and monitoring package, with infra red CO2 sensor (replaces part number 14LSILVER) OFFER ENDS 30-09-2021


Power Draw:0.100kW
Volume:14l
Oxygen control:No
Disinfection routine:No
Access port:25mm
Inner glass doors:1
Chamber:Stainless steel
Data logger:Yes
Humidity alert and monitoring package:No
CO2 sensor type:Infrared
Minimum temperature:25°C
Maximum temperature:50°C
Touch screen controller:No
Active humidification:No

Minimum specification that this product meets

  • A minimum, adjustable temperature range between 5oC above ambient and 50oC
  • An adjustable high and low temperature audible and visual alarm
  • A maximum temperature variance across all areas of the incubator chamber of ?0.5oC at a set-point of 37oC
  • An accuracy of ?0.1oC of the displayed temperature
  • A minimum, adjustable Carbon dioxide chamber concentration between 0% and 20% CO2
  • A CO2 detection system that automatically compensates for variations in chamber humidity
  • An adjustable high and low CO2 audible and visual alarm
  • An easily accessible and simple to use controller with digital set points and temperature display
  • A secondary, inner glass door with sealing gasket
  • Adjustable shelving
  • Electrical operation from a 230 volt, AC (50hz), power supply with a three-pin plug top to BS1363

Desirable features of this product

  • Bench or floor mounting options
  • Access ports to allow cables/tubes to be passed into the incubator chamber
  • Stainless steel chambers
  • A HEPA filtered CO2 inlet
  • Digital connectivity, e.g. RS232, USB

Desirable features this product does not have

  • The capability of having doors that can be hinged either on the left or right
  • A lockable main door
  • The capacity to be able to stack one unit on another
  • Adjustable feet
  • The capability to lock the control set points
  • Facility to attach a re-circulating, chilled water supply for sub-ambient temperature requirements
  • Digital humidity display
  • Hot air sterilisation facility
  • Water level sensor
  • Internal 13amp socket outlets with an ingress protection level IP66