Hettich Mikro 185 Microfuges GB-C1203

Microfuges - Hettich - Mikro 185

To obtain best pricing, request a quotation for the Hettich Mikro 185


Catalogue no.


Warranty (months) ? Brochure ? Average delivery time (weeks) ? List price

Offer price ? Quantity

Special Offer
GB-C1203 Wolf special offer - Microfuge Hettich Mikro 185 requires rotor for 1.5/2ml x 24, minumum tube volume 0.2ml, maximum tube volume 2ml, maximum g force 17,008, minimum temperature 26 degs C, maximum temperature 26 degs C, with run counter. OFFER ENDS 26-08-2018 24 months Hettich_Centrifuge_Mikro_185.pdf ? £1491.35 £1035.12

This product is approved by the UK public sector under framework LAB5028 LU and is currently being evaluated for agreement LAB1021 AP. Further details can be obtained by searching the internet on "General Laboratory Equipment LAB5028 LU".

Environmental Performance

Location of Manufacturer European
Max. Power Draw 0.320kW
Ecological Features Low power usage

Additional information

Rotor included No
Min tube volume 0.2 ml
Max tube volume 2 ml
Max tube capacity 24
Max g force 17008 g
Min temp 26 °C
Max temp 26 °C
Run counter Yes

No manual is currently available for this item.

Click here to request more details.


GB-A1226-A Rotor Hettich angle, 24-place for 0.2-2.0 ml tubes incl. bio-containment lid - Popular accessory

? £436.10 £322.01

GB-A2023 Adapter Hettich insert for carrier no. 1420-B for 1 x 0.5-0.8ml microtubes diameter 8 x 30-45mm

? £71.12 £59.56

GB-A2024 Adapter Hettich insert for carrier no. 1689-A for 6 x 0.2-0.4ml microtubes diameter 6 x 18-45mm

? £71.12 £59.56

GB-A1246 Lid Hettich for GB-A1213 angle rotor

? £272.91 £203.46

GB-A1252-A Rotor Hettich angle, 12-place for 0.2 - 2.0 ml tubes including lid

? £291.60 £216.79

GB-A1213-A Rotor Hettich angle, 18-place for 0.2 - 2.0 ml tubes + micro spin column kits

? £334.57 £247.43

GB-A1258-A Rotor Hettich angle, 18-place for 0.2 - 2.0 ml tubes including lid

? £355.54 £262.52

Help / Quotation Request Form

Please fill in the boxes below to request help from a technical specialist.

Your email address:
Telephone number:
Type of equipment:
Your message

Contact - Maintenance and Repair

Please provide the following contact information and complete as many fields as possible. Alternatively call our Service Team on 01759 301142 and select option 3.

Your email address:
Telephone number:
Fax number:
I am looking for:
Type of equipment:
Number of units:
Catalogue Number:
Model Number:
Serial Number(s):

LAB1021 AP framework - GB-C1203

This product is currently being evaluated for framework agreement LAB1021 AP as it has the following minimum requirements.
  • A lid interlock system that prevents user access to the rotor whilst it is in motion and prevents the rotor turning whilst the lid is open
  • The rotor bowl, lid and external casing must be sufficiently robust to be able to contain the rotor and all samples therein in the event a rotor or drive spindle failure
  • A variable speed controller with a controllable rotor speed range of 1,000rpm to 12,000rpm as a minimum
  • An adjustable timer to control the duration of centrifugation with a minimum range of 0 to 15 minutes
  • A hold feature to allow continuous operation of the machine independent of the timer
  • Straightforward, intuitive controls requiring the minimum of training
  • Legible digital display(s) capable of showing set time and speed and actual time and speed
  • A range of interchangeable rotors , as a minimum, 12 x 1.5ml microcentrifuge tubes or 12 x 0.75ml microcentrifuge tubes
  • Rotor imbalance detection and warning
  • Over speed detection and warning
  • Electrical operation from a 230 volt, AC (50hz), power supply with a three-pin plug top to BS1363