MV QUC-23050

1 litre condenser jar for MV SpeedTrap

100 x 13mm by 100mm tall glass tubes solid aluminium rotor

110 x 1.5 ml microcentrifuge tubes / 90 x 2.0 ml microcentrifuge tubes solid aluminium rotor

14 x 44mm by 100mm tubes solid aluminium rotor

200 x 12mm by 32mm tall glass vials solid aluminium rotor

30 x 27.5mm by 140mm tall glass vials solid aluminium rotor

32 x 35mm by 105 mm tubes solid aluminium rotor

38 x 25mm by 100mm vials solid aluminium rotor

70 x 23mm by 60mm tall glass vials solid aluminium rotor

Extenstion for Connection Kit, 1m wire reinforced hose and ½ inch to ½ inch hose connector

Friction Washer RTR-FRCTN-001, PKT=10

miVac Pressure Controller, vacuum control and display unit with vacuum ramping facility. Supplied with connections to interface with miVac connection kit MCK-00000-Y00. Universal voltage & frequency

MV Duo Pump, low vacuum pump, displacement >1.7m3/hr, ultimate vacuum 10mbar

MV FDA Freeze Drying Accessory Kit, without flasks

MV Quattro Pump, high vacuum pump, displacement >1.7m3/hr, ultimate vacuum <1.5mbar

MV Speed Trap condenser seal

MV SpeedTrap, defrost free solvent trap with internal gas compressor system. Chills to -50 celcius. Includes 1 litre jar

MV Super Vacuum Pump, displacement 6m3/hr, ultimate vacuum <0.5mbar, includes vacuum control valve, requires MCK-00000-Y00 connection kit

MV System Connection Kit for connection of pump and/or cold trap to concentrator, with 1m & 1.5m lengths 1/2 inch wire reinforced tube, power lead to control pump & catch pot for pump

Rotor Genevac aluminium, for 100 x 16mm diam x 100mm tall glass tubes, for use in the Quattro concentrator

Rotor Genevac aluminium, for 116 x 15mm diam x 60mm tall glass vials, for use in the Quattro concentrator

Rotor Genevac aluminium, for 200 x 1.5ml Eppendorf tubes, for use in the Quattro concentrator

Rotor Genevac aluminium, for 200 x 12mm diam x 75mm tall glass tubes, for use in the Quattro concentrator

Rotor Genevac aluminium, for 200 x 2.0ml Eppendorf tubes, for use in the Quattro concentrator

Rotor Genevac aluminium, for 32 x 25mm diam x 150mm tall glass tubes, for use in the Quattro concentrator

Rotor Genevac aluminium, for 36 x 50ml conical based centrifuge tubes, for use in the Quattro concentrator

Rotor Genevac aluminium, for 40 x 18mm diam x 150mm tall glass tubes, for use in the Quattro concentrator

Rotor Genevac aluminium, for 42 x 27.5mm diam x 60mm tall glass vials, for use in the Quattro concentrator

Rotor Genevac aluminium, for 72 x 15ml conical based centrifuge tubes, for use in the Quattro concentrator

Rotor Genevac swing out, for 4 microtitre plates (deep or shallow), for use in the Quattro concentrator

Spare lid seal, Quattro Concentrator

Special 17mm & 19mm vials solid aluminium rotor

Stacking kit Genevac to allow stacking of up to 5 shallow well plates per swing in a Quattro concentrator, pack of 16

Vapour Trap Genevac for neutralisation of ammonia or acid vapours, complete with all connections. Requires neutralising solution