EasySyn 500 Starter Reactor system

Anchor stirrer IKA R 4021 SY, PTFE-coated anchor stirrer, shaft length: 410 mm, shaft diamter: 10 mm, dimensions stirring tool (W/H): 89 mm / 70 mm, suitable for the EasySyn reactor system with reactor vessels SY 500, SY 500 D, SY 1000, SY 1000 D (Volumes: 500 ml; 1000 ml)

Bottom discharge valve IKA SY BDV HT, for temperatures up to 230 °C. Compatible with all EasySyn reactor vessels (SY 100 D, SY 250 D, SY 500 D, SY 1000 D, SY 2000 D, SY 5000 D).

Cable IKA PC 1.1 Cable, 3 meter, 2 RS 232/9/M/F

Clamp ring IKA SY clamp ring 100, for the EasySyn reactor system, suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D)

Cooling and heating circulator IKA CBC 5 basic, with strong heating and cooling power for an operating temperature range of - 25 °C to + 200 °C

Cooling and heating circulator IKA CBC 5 control, with strong heating and cooling power for an operating temperature range of - 25 °C to + 200 °C

Cooling and heating circulator IKA HRC 2 control, working temperature range from -30°C to 100°C and a powerful and infinitely variable pressure and suction pump

Draining set IKA LT 5.40 for reactor system

Electrode IKA SY pH 325, Low maintenance pH combination electrode with glass shaft, 2-hole diaphragms, screw plug head, L: 325 mm, D: 12 mm, 0 - 14 pH, 0 - 130 °C, accompanied with cable to connect to Almemo measuring instrument, e.g., Almemo 2490, suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D)

Ethernet-serial converter IKA ETH SER 16, 16 laboratory devices can be controlled or read out via ethernet. The ports support RS 232/ 422/ 485

Ethernet-serial converter IKA ETH SER 8, eight laboratory devices can be controlled or read out via ethernet. The ports support RS 232/ 422/ 485

Heating bath IKA HBC 5 basic stainless steel bath with a volume of 5 – 7 liters

Heating bath IKA HBC 5 control stainless steel bath with a volume of 5 – 7 liters

Heating Fluid IKA HF.Si.20.200.50, based on Silicon oil

Heating Fluid IKA HF.Si.20.250.50A, based on Silicon oil

Hose set IKA DN 12 (2 x 1.5 m), viton (FKM), reinforced with stainless wire mesh, chemical resistance: water; silicon oils; ethylene glycol; mineral oil; ethanol

IKA special offer - Stirrer overhead IKA England EUROSTAR 60 control max capacity 40l, stirrer speed 30 to 2000 rpm, digital control, with TFT speed display. Requires stirrer attachment OFFER ENDS 30-06-2025

Membrane vacuum pump IKA MVP 10 basic, for dry, oil-free applications

Membrane vacuum pump IKA VACSTAR digital

O-Ring IKA SY O-Ring 100 HT, PFA-coated, for the EasySyn reactor system, suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D)

O-Ring IKA SY O-ring 100, FEP-coated O-Ring for the EasySyn reactor system. Suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D)

Oil bubbler IKA SY OB 14, The oil bubbler is inserted into an NS 14/23 ground joint (sleeve)

Oil bubbler IKA SY OB 29, The oil bubbler is inserted into an NS 29/32 ground joint (sleeve)

Propeller stirrer IKA R 4011 SY PTFE-coated propeller stirrer, shaft length: 400 mm, shaft diamter: 10 mm, dimensions stirring tool (W/H): 40 mm / 8 mm, suitable for the EasySyn reactor system with reactor vessels SY 100, SY 100 D, SY 250, SY 250 D, SY 500, SY 500 D, SY 1000, SY 1000 D (Volumes: 100, 250, 500 and 1000 ml)

Reactor lid IKA SY 100.1 for the EasySyn reactor system. Suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D)

Reactor lid IKA SY 100.2 for the EasySyn reactor system. Suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D)

Reactor vessel IKA 100 ml Double-walled

Reactor vessel IKA 100 ml with bottom discharge

Reactor vessel IKA 1000 ml Double-walled

Reactor vessel IKA 1000 ml with bottom discharge

Reactor vessel IKA 2000 ml Double-walled

Reactor vessel IKA 2000 ml with bottom discharge

Reactor vessel IKA 250 ml Double-walled

Reactor vessel IKA 250 ml with bottom discharge

Reactor vessel IKA 500 ml Double-walled

Reactor vessel IKA 500 ml with bottom discharge

Reactor vessel IKA 5000 ml Double-walled

Reactor vessel IKA 5000 ml with bottom discharge

Reflux Condenser IKA Reflux condenser with NS 29/32 cone

Software IKA Labworldsoft 6 Pro

Sparger IKA SY SP 500, used to introduce gases into the reaction solution of the EasySyn reactor vessels, Suitable for NS 14/23 ground joint. Suitable for EasySyn reactor vessels with a total volume of 500 ml (SY 500 D, SY 500)

Stirrer guide IKA to accommodate a stirrer tool with a shaft diameter of 10 mm for the EasySyn reactor systems

Stirrer overhead IKA England EUROSTAR 100 control max capacity 100l, stirrer speed 30 to 1300 rpm, digital control, with TFT speed display. Requires stirrer attachment

Stirrer overhead IKA England EUROSTAR 60 digital max capacity 40l, stirrer speed 30 to 2000 rpm, digital control, with LED speed display. Requires stirrer attachment

Swivelling screw fitting IKA SY NS.12, Adapter for holding the pH Electrodes SY pH 325 and SY pH 425 and for holding hoses or tubes with an outer diameter of 12 mm. Fits in NS 29/32 ground joints

Swivelling screw fitting IKA SY NS.6, Attachment for holding probes, hoses or tubes with an outer diameter of 6 mm. Fits in NS 29/32 ground joints. The picked-up object can be fixed in the desired position with an angle of inclination of up to 8°

Swivelling screw fitting IKA SY NS.8 Adapter for holding the Temperature sensors PT 100.300 and PT 100.500 and for holding hoses or tubes with an outer diameter of 8 mm, fits in NS 29/32 ground joints

Temperature measuring instrument IKA ALMEMO 2490-2 allows to connect up to two sensors with the special ALMEMO plugs for pH and/or Temperature measurements.

Temperature sensor IKA H 71.32 T, PTFE coated, length: 320 mm, diameter: 8 mm, suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D).

Temperature sensor IKA PT 100.300, PTFE coated, length: 300 mm, diameter: 8 mm, suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D)

Tempering hose IKA LT 5.32 1600 mm, 2 pcs

Tempering hose IKA LT 5.31 1200 mm, 2 pcs

Tempering hose IKA T 5.30 800 mm, 2 pcs

Tube set IKA H.PUR.12.AD Hose set DN 12 (2 x 1.5 m), incl. 4 hose clamps, DN 12 olives and M 16x1 lock nuts for connecting a double walled reactor vessel.

Universal Fluid IKA UF.Si.N30.150.10LV, based on silicion oil

Universal vacuum controller IKA VC 10 lite Speed-controlled, for controlled evacuation of air (gas) from laboratory equipment, as well as for classical separation, filtration or drying tasks in the laboratory. The controller is ready-to-use in numerous applications and can be easily installed.

Universal vacuum controller IKA VC 10 pro Valve-controlled, for controlled evacuation of air (gas) from laboratory equipment, as well as for classical separation, filtration or drying tasks in the laboratory. The controller is ready-to-use in numerous applications and can be easily installed.

USB-serial converter IKA USB SER 16, up to 16 laboratory devices with 9-pin RS 232 connection can be controlled or read out via a USB interface. The ports support RS 232

USB-serial converter IKA USB SER 4, up to 4 laboratory devices with 9-pin RS 232 connection can be controlled or read out via a USB interface. The ports support RS 232

USB-serial converter IKA USB SER 8, up to 8 laboratory devices with 9-pin RS 232 connection can be controlled or read out via a USB interface. The ports support RS 232

Vacuum cock IKA SY VC with NS 14/23 core and hose olive. For connection to a vacuum hose

Vacuum pump IKA VACSTAR control diaphragm for use with chemicals, with inlet trap, no condenser, 2mbar ultimate vacuum, 22l/min flow rate, not ATEX compliant, no integral gas ballast valves, oil free (replaces part number 0020019067)

Vacuum pump IKA VACSTAR lite, diaphragm for universal use in dry and oil-free vacuum applications, chemically resistant, with inlet trap, no condenser supplied (VSE 1 emission condenser available as an accessory), 9mbar ultimate vacuum, 16.67l/min flow rate, not ATEX compliant, no integral gas ballast valves, oil free, suitable for rotary evaporators and filtration

Vessel clamp IKA SY clamp 100, for the EasySyn reactor system, suitable for reactor vessels with volumes of 100 ml (SY 100 and SY 100 D), 250 ml (SY 250 and SY 250 D), 500 ml (SY 500 and SY 500 D) and 1000 ml (SY 1000 and SY 1000 D)