PG8536 CD AD

Insert Miele half width basket for beakers, flasks and wide-mouthed glassware, 67/127h x 225w x 442d mm, for upper or lower baskets. NOTE - the part is not in original packaging.

Installation Miele glass washer, connection to existing services, commissioning and user training of slimline range according to terms and conditions (available on request)

ProCare 10 AP 5 litres

ProCare 10 MA 10 litres

ProCare 10 MA 5 litres

ProCare 11 MA 10 Kg powder

ProCare 30 C 5 litres Neutraliser Citric acid

ProCare 30 P 5 litres Neutraliser Phosphoric acid

ProCare Universal 61 6kg salt Procare Universal 61 salt 6Kg

A 3 Quarter Cover Net 206mm x 206mm

A2 Half Cover Net 216mm x 456mm

As E 329 but with connection for hot air drying, for use in G 7883 CD / PG 8536

As E 350 but with connection for hot air drying, for use in G 7883 CD /PG8536

As E 404/1 but with connection for hot air drying, for use in G 7883 CD/PG8536

As O 175 but without connection for hot air drying

For use with O and U 184 W: 280mm, D: 280mm, H: 8mm

Full W: injector unit for 116 pipettes

Full W: injector unit for 38 pipettes arranged in 3 rows

Full W: insert for 38 Petri dishes up to 100mm dia

Full W: insert for 56 Petri dishes up to 100mm dia

Full W: insert for 56 Petri dishes up to 100mm dia, for use with E 136

Full W: stainless steel coarse filter

Glassware cradle support for use with E 351 injector

Glassware cradle support for use with E 352 injector

Half insert for 10 beakers 250ml to 600ml, 10 x 3 holders

Half insert for 105 watch glasses 50mm to 60mm dia

Half insert for 18 beakers up to 250ml, 18 x 3 holders

Half insert for 21 beakers up to 250ml, 21 x 3 holders

Half Insert for 210 Slides

Half insert for 44 watch glasses 80mm to 125mm dia

Half insert for 8 beakers 600ml to 1000ml, 8 x 3 holders

Half insert for beakers, flasks and wide-mouthed glassware

Half insert with 13 spring hooks 175mm high, spacing approx 85mm

Half insert with 26 spring hooks 105mm high, spacing approx 60mm

Half insert with 26 spring hooks: 10 x 175mm high, 16 x 105mm high

Injector jet 4mm dia x 160mm, for use with E 353

Injector jet 6mm dia x 220mm, for use with E 354

Injector jet nozzle 110mm long x 2.5mm dia.

Injector jet nozzle 140mm long x 4mm dia.

Injector jet nozzle 160mm long x 4mm dia.

Injector jet nozzle 200mm long x 6mm dia.

Injector jet nozzle 220mm long x 6mm dia.

Injector jet nozzle 240mm long x 6mm dia.

Injector jet nozzle 90mm long x 2.5mm dia.

Injector unit with 39 jets of 8 different H:s over full W:

Lower basket for tubes, vials etc. With 96 2.5mm x 110mm injectors

Lower basket with 33 injectors, for use with O 175, O 184 or O 187

M 8 x 1 screw-in plug to blank off openings in injector unit supply arms

MC/2 Miele trolley

Nozzle Miele for butyrometers, for use in E331 injector unit

Nozzle Miele for injector units, 2.5mm diameter x 90mm, with cradle support for glassware

Open stainless steel lower basket for use with half and full W: inserts

Open top basket similar to O 188/1 but with increased clearance

Quarter insert for up to 200 test tubes 12mm x 105mm, inc. A 13 lid

Quarter insert for up to 200 test tubes 12mm x 165mm, inc. A 13 lid

Quarter insert for up to 200 test tubes 12mm x 200mm, inc. A 13 lid

Quarter insert for up to 200 test tubes 12mm x 75mm, inc. A 13 lid

Quarter insert for up to 80 test tubes 6mm x 105mm, inc. A 13 lid

Quarter lid for AK 12, 7mm x 7mm perforations

Screw-in plastic pipette sleeve/holder, for use with injector unit

Stainless steel full W: insert, 7mm x 7mm perforations

Stainless steel half W: insert, 7mm x 7mm perforations

Support holder for microtiter plates, for use with E 493

Top basket for use with selected full and half W: inserts, open front