Cryochiller

Cryo-Termostats with a controlled vacuum

ECOLOGICAL COOLING SYSTEM WITH VACUUM CONTROL FOR LABORATORY
ROTARY EVAPORATORS

It is a highly, efficient condensation system, pump and environment safe and essential laboratory equipment suitable for Rotary Evaporators. Cryo Chiller is able to cool at low temperatures, by means of circulating liquid, the condensation coils of any evaporator brand,thanks to an efficient and ecological cooling Peltier system. A better condensation can be abtained, thus allowing a larger recovery of the evaporated solvent, avoiding wasting water, reducing any vacuum pump damage and environmental contamination and risk to the operator.Moreover, the instruments is equipped with a vacuum pump with anticorrosive PTFE membrane (8 or 2 mbar of final vacuum), a sophisticate vacuum controller and microprocessor which permits to optimize the evaporation process. A condensation trap positioned before the pump and a glass refrigerator (with high thermal exchange capacity) guarantee further scrub of the residual solvents for the safeguard of the operator end enviroment.

ADVANTAGES
-Optimisation of evaporation process thanks to the electronic vacuum controller
-Continuous display of the vacuum in the evaporation system aimed to check sealing troubles with
the coupling and/or pump efficiency
-Better condenser efficiency
-Standardization of ideal condensation temperature
-Quick Evaporation
-Feed water saving
-Low electrical consumption
-Safe environment:
*no refrigerating water waste
*solvent collection at the pump outlet preventing any scattering in the environment
*no use of CFC refreigerating products
-Operator safety thanks to glass component protection
-User-friendly
-Very economical compared to single component purchasing
-Compact and safe space design
-Flexibility: Cryo-Chiller can be linked to any evaporator
-Quiet: no refrigerating compressor needed

SAFETY AND PHILOSOPHY ENVIROMENTAL PROTECTION

Health and safety in the workplace are undoubtly one of the foundations of the European Community's social policy. Many official documents have been published toward achieving the goal of continuously improving health and safety in the workplace.

Steroglass has fully embraced this philosophy and the most tangible proof of this is its "CE-approved" line of products.

The Cryochiller originated from the need to optimize evaporation processes in the laboratory: by regulating the operating pressure and the cooling temperature, the Steroglass Cryochiller minimizes the realising into the enviroment of volatile organic compounds (VOCs), which have been proven to be noxius and toxis.

The Peltier cooling system guarantees a limited consumption of electricity and zero enviromental impact.

No water consumption, thanks to the closed circuit cooling system.
Grazie al sistema di refrigerazione a circuito chiuso, non vi è consumo idrico.

CRYOCHILLER: the ecological safety cooling system:

- No more solvent vapors in the laboratory
- No more solvent releasing into the enviroment
- No more waste of water
- Total solvent condensation
- Total evaporation control
- Ecological Peltier cooling system
- No more reducing of evaporation pump performance

CRYOCHILLER: FOUR INSTRUMENTS IN ONE!

- Closed circuit cooling system
- Vacuum pump
- Electronic Vacuum Control
- System of traps

All on a single, small, easy to move chassis.

Technical Specification

Component and Performance:

- AISI 316 stainless steel chassis resistant to solvents
- Polycarbonate watching window
- Frontal door for inspection and glass components replacement
- Panel for setting and reating the temperature: -10/+30°C(+/-0,1°C accuracy) with digital display
- Ideal working temperature (+3 to +7°C)
- Peltier cell cooling system coupled with a 3-liter sealed stainless steel tank filled with glycol
- Force pump to aid coolant liquid circulation both in the cooler as well as in the post-pump condenser(flow rate 10 lt./min.)
- Anticorrosive vacuum pump PTFE diaphragms, max. vacuum 8 or 2 mbar
- Accurate eletronic system for reading and controlling the vacuum
- nr.1 pump-saver collection flask, 250 ml, in borosilicate glass
- nr.1 dual coil condenser in borosilicate glass, complete with 250 ml collecting flask
- Outside dimensions:h.600mm, width 250mm, depth 450mm



Component and Performance:

- Microprocessor control
- Easy to use and to set parameters
- Coolant temperature can be set and controlled with an accuracy of +/-0.1°C
- Vacuum Setting and control
- ON/OFF external circulation control
- Display of for operating conditions settings

Accessories