Features and Advantages of the ROTINA 35 Centrifuges

Ergonomically arranged controls and displays
Metal housing and metal lid, the housing is finished in scratch and impact resistant powder coating.
Shackle lock for easy lid locking and holding.
Lid with see-through glass for speed control during centrifugation.
A convenient twist lock enables effortless opening and closing of the lid, lid holding during rotor run.
Brushless induction drive
Smooth and quiet running
High speed stability
Extremly short run-up and run-down times
Automatic rotor recognition
Imbalance switch-off
Efficient cooling controllable from -20°C to +40°C.
Performance:
RCF of max. 23,646 in angle rotor, max. speed 15,000 rpm
RCF of max. 4,556 in swing-out rotor, max. speed 5,000 rpm

Operation and Additional Features

Entry of parameters can be carried out fast and conveniently via the water-proof foil-keypad. Just a few keys are all it takes to programme the centrifuging parameters. The last entered values will be stored. They remain in the memory even after centrifuge has been switched off. By pressing the START key the parameters are recalled.
The clearly arranged display is easy to read. During centrifugation the actual values are digitally displayed.
Programable small control, 3 complete operation programs can be stored and recalled.
Speed, RPM: Input in increments of 10
Running time t/min: Input in minutes
Relative Centrifugal Force RCF: Input in increments of 1
Run-up/run-down time: Input of acceleration and braking ramps in levels 1-9 and unbraked run-down.
Radius r/mm: Input of the radius is required for determining RPM and RCF.
Short cycle mode
Temperature, T/°C: Input in increments of 1°C within a range of -20°C to +40°C.
Pre-cooling programme

Accessories

Technical Data

	With just 9 rotors and an extensive range of accessories almost every kind of centrifuging required in practice can be undertaken:
	1724, swing-out rotor, 4-place, for max. 4 x 100 ml, max. RCF 4,528 1726, swing-out rotor, 6-place, for max. 6 x 50 ml, max. RCF 2,808 1718, angle rotor for max. 6 x 85 ml, max. RCF 13,934 1714, angle rotor, light metal, with lid, phenol resistant, autoclavable, for 30 microlitre tubes, max. RCF 23,646
	1711, drum rotor, light metal with lid and 6 compartments for 60 microlitre tubes, max. RCF 16,435
	1717, swing-out rotor, 10-place, for max. 10 x 50 ml (Falcon), max. RCF 4,556
	1725, swing-out rotor, 4-place, for 4 microtitration plates, max. RCF 2,147 1722, swing-out rotor, 2-place, for max. 4 microtitration plates or 2 culture plates, max. RCF 2,093
	1748, swing out rotor, 8-place for cyto-suspensions, max. RCF 2,218