digital display for ease and reproducibility of temperature setting
	microprocessor or proportional temperature control
	rapid heat up, optimised heater power and natural or forced air convection

 

	two models available, for four and ten bottles
	accept standard 35mm diameter bottles in 4 lengths: 100, 150, 225, 300mm
	offset clips ensure excellent membrane coverage
	forced air circulation coupled with proportional temperature control combine to provide consistency from procedure to procedure
	stability: ±0.1°C within the bottles
	fast heat up, from ambient to 65°C within 25 minutes
	carousel also available for 50ml conical centrifuge tubes
	smooth, consistent, quiet and durable rotating mechanism

	rotating carousel for: up to 10 bottles, 35mm x 300mm bottles up to 20 bottles, 35mm x 150mm bottles
	optional rocking platform for dishes, boxes or heat sealed bags
	adjustable rotating speed: 0 to 20 rpm
	temperature range: ambient +10°C to 100°C
	separate digital displays for speed and temperature

	rotating carousel for: up to 10 bottles, 35mm x 300mm bottles up to 20 bottles, 35mm x 150mm bottles
	optional rocking platform for dishes, boxes or heat sealed bags
	fixed rotating speed: 7 rpm
	temperature range: ambient +10°C to 100°C
	digital display for temperature only

	rotating carousel for: up to 4 bottles, 35mm x 300mm bottles up to 8 bottles, 35mm x 150mm bottles
	adjustable rotating speed: 0 to 20 rpm
	separate digital displays for speed and temperature
	temperature range: ambient +10°C to 75°C
	novel trap door minimises heat loss while inserting or removing bottles
	compact, 'front-to-back' design is space saving and convenient
	transparent chamber for clear observation

	rotating carousel for: up to 4 bottles, 35mm x 300mm bottles up to 8 bottles, 35mm x 150mm bottles
	fixed rotating speed: 7 rpm
	digital display for temperature only
	temperature range: ambient +10°C to 75°C
	novel trap door minimises heat loss while inserting or removing bottles
	compact, 'front-to-back' design is space saving and convenient
	transparent chamber for clear observation

	Southern and northern blotting processes
	pre-hybridisation and stringency washes

	HIR10M is supplied with two 300mm long glass bottles and a stainless steel drip tray
	HIR4M is supplied with a stainless steel drip tray
	glass hybridisation bottles, 2 per pack: HBG2-300 35mm x 300mm HBG2-225 35mm x 225mm HBG2-150 35mm x 150mm HBG2-100 35mm x 100mm
	carousel for 50mm centrifuge tubes HIR10-CAR30 for HIR10M, holds 30 tubes HIR4-CAR8 for HIR4M, holds 8 tubes
	carousel for 15ml tubes HIR4-CAR12 for HIR4M, HIR4, holds 12 tubes
	carousel for 1.5ml tubes HIR4-CAR36 for HIR4M, HIR4, holds 36 tubes
	rocker platform, for HIR10M HIR10-ROC 215 x 280mm

	rotating carousel for up to four 50 ml conical centrifuge tubes
	rotisserie action ensures excellent membrane coverage, and the small tube size reduces the probe quantity to a minimum
	chamber is transparent on three sides for clear observation
	compact design for convenience: space-saving and easily transportable, fits in virtually any laboratory location
	holds four tubes; the popular method of performing hybridisations in disposable vessels is convenient, cost-effective and time saving
	adjustable rotating speed from 6 to 20 rpm
	temperature range: ambient + 5°C to 80°C
	stability within each tube: ±0.1°C
	fast heat up, to 70°C within 25 minutes

	nucleic acid hybridisation procedures in 50ml conical centrifuge tubes
	Westerns at ambient temperature

	carousel for 15ml tubes HIM-CAR6, holds 6 tubes
	carousel for 1.5ml tubes HIM-CAR12, holds 12 tubes

	the gentle rocking motion is perfect for washes and hybridisation
	compact and with a small footprint - space saving and convenient
	three shelves to accommodate blots up to 20 x 20 cm; maximum load 1kg
	shelves are removable to increase space and accommodate large dishes
	air-tight transparent door, for easy observation
	adjustable rocking speed from 8 to 25 strokes/minute
	temperature range: ambient + 5°C to 70°C
	stability within each vessel: ±0.25°C @ 65°C

	hybridisation and wash procedures
	for scientists who prefer to use heat sealed bags and/or TupperwareTM dishes
	can also be used as a conventional incubator

supplied with three removable trays, each 220 x 200 x 13mm

	unique wave action rollers ensure excellent membrane coverage, while minimising the amount of probe needed
	accommodates many types and sizes of hybridisation bottles and tubes, for maximum versatility
	roller speed adjustable from 10 to 28 rpm
	bottle speed diameter dependent: large acrylic bottle 2 to 7 rpm
	holds up to eleven rollers
	rollers can be shared between bottles, bottles can be stacked to increase the capacity
	holds 5 large or 7 small Boekel acrylic bottles, stacked
	glass window for easy observation
	temperature range: ambient + 5°C to 70°C
	stability within each bottle: ±0.25°C @ 65°C

	hybridisation procedures requiring bottles or other cylindrical vessels of virtually any size
	for DNA, RNA and protein blotting techniques
	especially useful for blots requiring large diameter bottles

the following accessories are supplied as standard:

	two large leak-proof acrylic bottles
	two wave action and two straight rollers
	removable stainless steel drip pan
	two gaskets

With a roller mechanism similar to that of the HIW7 hybridisation incubator, the WR28 provides the gentle motion required for hybridisations, washes, and other mixing applications.

	supplied with one wave action, two straight action rollers; the capacity for smaller vessels can be increased by reducing the spacing and fitting extra rollers
	holds up to seven rollers
	for operation in ambient temperatures from 4°C to 65°C - incubator and cold room safe

	for gentle mixing of cylindrical vessels such as roller bottles, hybridisation bottles and test tubes
	this motion is excellent for mixing blood samples while maintaining cellular integrity

the following accessories are supplied as standard:

	one straight action, two wave action rollers
	removable stainless steel drip pan

	the beta blocking vessels stand on their own sturdy base - no need for a rack: HBA-L large bottle: 70mm i.d. x 216 mm, 6mm thick HBA-S small bottle: 57mm i.d. x 178 mm, 6mm thick
	one wave action and one straight action roller is needed per bottle for wave action roller motion; alternatively, select two straight rollers for non-wave motion: WRS wave action roller system: consists of one straight, one wave action roller SRS straight action roller system: consists of two straight rollers AC35 adaptor collar for 35mm bottles AC50 adaptor collar for 50ml tubes