800 Watt heating membrane provides even
heat distribution
Dries sequencing gels up to 40 x 50 cm in
as little as 30 minutes
Quickly dries multiple small format gels
Accurate temperature control up to 90 degs
C
5 hour timer for heating
5 hour timer for vacuum
Purpose built Gelmaster vacuum pump
simultaneously serves up to 3 dryers
The
Scie Plas gel dryers are available in two size 45 x 34 cm and 50 x 40 cm.
The dryers have independent timers for temperature and vacuum. These gel
dryers feature robust construction with a cast aluminium base for even heat
distribution and stainless steel control box for strength and safety. The
GelMaster Vacuum system features two pumps in one package. A room
temperature vapour trap acts as a pump by condensing the hot vapours from
the gel dryer and trapping them from the rest of the systems; this is
followed by a high efficiency diaphragm pump delivering a powerful non
fluctuating vacuum for fast smooth drying which acts as the primary vacuum
source. This pump is so efficient that one Gelmaster can be connected to
three gel dryers at the same time. To operate simply connect the vacuum line
to the gel unit and power up. As the gel is drying, the vapour trap
condenses the vapour and removes liquid from the system. The 1.5L capacity
allows for the drying of 10 - 15 gels before the trap needs to be drained.
The trapping medium can be used repeatedly as it does not mix with the
condensate.
Specifications for
Electrophoresis Gel Dryers
Specification
Size cm
Dryer
Dimensions
GD-4534
GD-5040
H x W x D
110 x 570 x 400
120 x 630 x 480
Timers
Vacuum
Heat
0 - 5
hours
0 - 5 hours
Gel size
GD-4534
GD-5040
Dries gel
up to size
45 x 34 cm
50 x 40 cm
Weight
14 kg
Vacuum
Pump
Maximum
vacuum
- 440 mbar
Max
Airflow
70 l/m
Noise
level
45 dba at
1meter
Dimensions
31.5 x 18
x 22 cm
Weight
7 Kg
Odering information
Slab Gel Dryer
Model
Description
SP GD4534A
45 x 34 cm Slab gel dryer system
includes Stainless steel screen, Mylar sheet, porous polyethylene sheet,
clear silicone rubber overlay sheet. 110 volts
VGD-MS
Mylar Sheet
VGD-PPS
Porous Polyethylene Sheet
VGD SRO
Clear silicone rubber overlay
VGD-SSS
Stainless steel screen
SP GD5040A
50 x 40 cm Slab gel dryer system
includes Stainless steel screen, Mylar sheet, porous polyethylene sheet,
clear silicone rubber overlay sheet. 110 Volts
GD-MS
Mylar Sheet
GD-PPS
Porous Polyethylene Sheet
GD SRO
Clear silicone rubber overlay
GD-SSS
Stainless steel screen
SP GDPUMPA
Vacuum pumping kit
Gel Dryers
With optimal sealing of the
rubber mask
Temperature regulation between
20 and 90°C
Timer with LED display
Biometra’s geldryers, highly appreciated for their durability, very quiet
operation and reliability, are for drying vertical slab gels and provide
optimal drying for all types of gels. The dryers feature temperature
regulation between ambient temperature and 90°C.
The gels are heated
from below and the vacuum removes the moisture from below to dry the gel
homogeneously. When applying the vacuum a groove that frames the drying
surface provides an optimum tight seal during the drying period.
All gel dryers are
equipped with a timer, which also shows how much drying time is left.
Membrane pumps MP26,
MP20 and MP40 are suitable for use with the MiniDry.
The Minidry has a drying surface of 18 x
18 cm and is for laboratories with low throughput.
The
Mididry has a drying surface of 30 x 40 cm and is for laboratories that
dry several gels at once.
The Maxidry has a
drying surface of 40 x 60 cm and is for drying sequencing gels or
multiple large gels
(Multigel-Long,
Maxigel).
Tel
01759 301142 Fax 01759 301143
Wolf
Laboratories Limited, Colenso House, 1 Deans Lane, Pocklington, YORK,
YO42 2PX
If you
encounter a problem with any part of this website, please e-mail us at
sales@wolflabs.co.uk
The
Scie Plas gel dryers are available in two size 45 x 34 cm and 50 x 40 cm.
The dryers have independent timers for temperature and vacuum. These gel
dryers feature robust construction with a cast aluminium base for even heat
distribution and stainless steel control box for strength and safety. The
GelMaster Vacuum system features two pumps in one package. A room
temperature vapour trap acts as a pump by condensing the hot vapours from
the gel dryer and trapping them from the rest of the systems; this is
followed by a high efficiency diaphragm pump delivering a powerful non
fluctuating vacuum for fast smooth drying which acts as the primary vacuum
source. This pump is so efficient that one Gelmaster can be connected to
three gel dryers at the same time. To operate simply connect the vacuum line
to the gel unit and power up. As the gel is drying, the vapour trap
condenses the vapour and removes liquid from the system. The 1.5L capacity
allows for the drying of 10 - 15 gels before the trap needs to be drained.
The trapping medium can be used repeatedly as it does not mix with the
condensate.