High speed refrigerated table top centrifuge for centrifugal forces of up to and more than 60 000 x g.
	Single-knob control with LCD-display.
	Efficient cooling system, pre-selection from -20°C to +40°C.
	Maintenance-free brushless drive motor, controlled by a microcontroller. No changing of motorbrushes, no carbon dust, unusually quiet operation.
	20 curves for acceleration and deceleration (10 quadratic; 10 linear), altogether 50 programs can be stored. With free programming of all centrifugation parameters including possibility of pre-cooling the rotor during standstill.
	Speed range from 20 to 30 000 rpm., selectable in steps of 1 rpm. Alternatively the selection and display may be toggled to gravitational field instead of rotor speed even during operation.
	Magnetic rotor identification prevents over-speeding rotors.
	Simple operation e.g.: for routine research use, start/stop button on the front of the centrifuge.
	Motorized (Soft close) lid lock system.
	Time pre-setting infinite or up to 9h 59min.
	Available with heating device up to 60°C.

Technical Specifications

Power Supply	230 V / 50 Hz
Power consumption drive	700 Watt
Power consumption refrig.	560 Watt
Maximum rotational speed	30.000 1/min
Maximum capacity	6 x 85 ml
Interference suppression	EN 61326
Dimensions: Height x Width x Depth	400 x 550 x 650 mm
Weight without accessories	100 kg
Max. kinetic energy	max. 43.753 Nm

Accessories for the SIGMA 3K30 centrifuge

Rotors

Order. no.	Description	Max. rpm	Max. rcf
12159	Angle rotor 6 x 80/85 ml, for tubes no. 13085, 15074, 15075, 15076, 15080	15.500 1/min	26.323 x g
12156	Angle rotor 8 x 50 ml, for tubes no. 13055, 15048, 15051, 15052, 15054	16.500 1/min	29.220 x g
12155	Angle rotor 4 x 80/85 ml, for tubes no. 13085, 15074, 15075, 15076, 15080	20.000 1/min	40.695 x g
12158	Angle rotor 6 x 30 ml, for tubes no. 15029, 15030, 15032, 15034	26.200 1/min	60.628 x g
12150	Angle rotor 6 x 50 ml, for tubes no. 13055, 15048, 15051, 15052, 15054	21.000 1/min	41.415 x g
12157	Angle rotor 20 x 10 ml, for tubes no. 15000, 15010, 15019	16.000 1/min	28.048 x g
12111	Angle rotor 10 x 10 ml, for tubes no. 15000, 15010, 15019	26.000 1/min	57.438 x g
12154	Angle rotor 24 x 2,2 - 1,5 ml, e.g. reaction vials no. 15008, 15040	26.000 1/min	61.973 x g
12110	Angle rotor 12 x 1,5 - 2,2 ml, e.g. reaction vials no. 15008, 15040	30.000 1/min	64.397 x g
19776	Angle rotor for 6 Falcon tubes 50 ml no. 15151	14.000 1/min	20.379 x g
12171	Angle rotor 12 x 15 ml culture tubes	13.500 1/min	2.072 x g
11390	Rotor fo 4 buckets	5.000 1/min	3.773 x g
11391	Swing-out rotor 4 x 100 ml	5.000 1/min	3.773 x g
11136	Drum rotor for 6 inserts No. 14000, 14002, 14020, 14021, for reaction tubes (max. 60/120 pcs.), incl. lid	16.000 1/min	20.035 x g
11222	Rotor for 2-6 Mikrotiter-plates, max. height of plates 56 mm	3.000 1/min	1.238 x g
12112	Angle rotor 12 x 15 ml, for Greiner No. 187261, max. Ø 17/22 x 95 - 100 mm	14.000 1/min	21.913 x g
12131	Angle rotor 30 x 1,5/2,2 ml, for reaction tube	20.000 1/min	44.720 x g
12348	Angle rotor 48 x 1,5/2,2 ml	15.300 1/min	21.984 x g
11392	Swing-out rotor 16 x 15 ml	5.000 1/min	3.750 x g

Accessories

Order. no.	Description	Suitable for:
15074	Tube made of polycarbonate 80 ml, incl. special screw cap made of aluminium with seal for high speeds, ø38 x 112 mm	12159 and 12155
15076	Tube made of polycarbonate 80 ml, incl. screw cap, ø38 x 112 mm	12159 and 12155
15080	Tube made of polyflor 80 ml, incl. screw cap, ø38 x 112 mm	12159 and 12155
15054	Tube made of polycarbonate 50 ml, incl. screw cap, ø28.5 x 107 mm	12156 and 12150
15051	Tube made of teflon 50 ml, incl. screw cap, ø28.5 x 107 mm	12156 and 12150
15052	Tube made of polypropylene 50 ml, incl. screw cap, ø28.5 x 107 mm	12156 and 12150
15030	Tube made of polycarbonate 30 ml, incl. screw cap, ø25.3 x 92 mm	12158
15032	Tube made of polypropylene 30 ml, incl. screw cap, ø25.3 x 92 mm	12158
15029	Tube made of teflon 30 ml, incl. screw cap, ø25.3 x 92 mm	12158
15010	Tube made of polycarbonate 10 ml, incl. screw cap, ø16.1 x 81.1 mm	12157 and 12111
15019	Tube made of polyallomer 10 ml, incl. screw cap, ø16.1 x 81.1 mm	12157 and 12111
15000	Tube made of teflon 10 ml, incl. screw cap, ø16.1 x 81.1 mm	12157 and 12111
13000	Adapter for reaction tube 0,25/0,4 ml	Rotors for 1,5/2,2 ml
13002	Adapter for reaction tubes 0,5/0,75 ml	Rotors for 1,5/2,2 ml
13021	Adapter for PCR-tube 0,2 ml	Rotors for 1,5/2,2 ml
13059	Adapter for 1 tube 10 ml, No. 15000, 15010, 15039, max. Ø 16,2/19 x 75 - 85 mm	12158
13060	Adapter for 1 culture tube 15 ml	1315, 19776
13062	Adapter for 1 Greiner-tube with cap 15 ml, Ø 17/22 x 75 - 100 mm	12150
13063	Adapter for 1 Greiner-tube with cap 15 ml, Ø 17/22 x 75 - 100 mm	12159
13079	Adapter for 1 tube 50 ml	19776
13080	Adapter for 1 culture tube 50 ml	12159
13081	Adapter for 1 culture tube 15 ml	12155, 12159
13083	Adapter for 1 tube 30 ml, max. Ø 25,5 x 90 - 100 mm	12155, 12159
13082	Adapter for 1 tube 50 ml, max. Ø 28,8 x 105 - 110 mm,	12155, 12159
13084	Adapter for 2 tubes 10 ml, Ø 16/17,5 x 75 - 90 mm	12155, 12159
13130	Bucket with thread for 3 culture tubes 15 ml sealable with cap no. 17111	11133
14000	Adapter 20 x 0,25 ml	11136
14002	Adapter 10 x 2,2/1,5 ml	11136
14020	Adapter 10 x PCR-tubes 0,2 or 0,5 ml	11136
14021	Adapter 32 x PCR-tubes 0,2 ml or 4 stripes a´ 8 tubes	11136
13004	Multiple carrier for 5 tubes 7 ml, max. Ø 12,5/16 x 95 - 105 mm	11390
13009	Multiple carrier for 5 tubes 5 ml, max. Ø 12,5/16,5 x 65 - 85 mm, RIA-tubes, Vacutainer-tubes	11390
13012	Multiple carrier for 4 tubes 5 - 15 ml, max.Ø 17 x 90 - 110mm	11390
13097	Round bucket for 1 tube 100 ml, max. Ø 45,5 x 95 - 105 mm	11390
13041	Bucket for round carriers no. 14029, 14030, 14031, 14032, 14033, 14034, incl. polysulfone screw cap No. 17130 (for rotor No. 11192 and 11390, production 2003 and later only)	11192
13150	Carrier incl. polysulfone screwcap No. 17151 for 1 culture tube 50 ml	11390
13152	Carrier for 2 culture tubes 15 ml	11390
14029	Carrier for 5 tubes 7 ml Nr. 15007, 15027 and RIA-tubes 5 ml Nr. 15060, max. Ø 12 x 100 mm	13041
14030	Round carrier for 4 tubes 15 ml no. 15015, 15020, 15023, 15024, max Ø 16,5 x 110 mm, Ø of cap 17 mm	13041
14031	Round carrier for 1 glass tube 25 ml no. 15025, 15026	13041
14032	Round carrier for 1 tube 50 ml no. 15049, 15050, 15056	13041
14033	Round carrier for 4 hemolyse or Vacutainer tubes Ø 12,5/16,5 x 60/70 mm and RIA-tubes 5 ml No. 15060	13041
14034	Round carrier for 3 tubes 15 ml no. 15015, 15020, 15023, 15024, or e. g. Monovettes 9 ml, max. Ø 17,2 x 110 mm, Ø of cap 19 mm	13041
14035	Round carrier for 1 Sterilin-tubes 30 ml with cap, flat bottom, Ø 25/31 x 65 - 95 mm	11390
17920	Centrifuge table, varnished steel container with 2 doors, room to store accessories, movable, with lockable reels, Dimensions: Width 550 mm, Depth 600 mm, Height 497 mm	3K30
13037	Multiple carrier made of synthetic material for 6 x 5-15 ml 17/19x90-110, Monovettes	11390
13064	Adapter 1 x 30 ml 25/31 x 65 mm Sterilin No. 3008	13150