Small centrifuge for sedimentation in standard tubes  in a 6 place angle rotor. Brushless drive motor practically maintenance-free. Low noise level through modern drive system. Short acceleration and deceleration of the standard rotor. Time pre-selection up to 30 min., short run or continuous operation. Electric brake. Double lid locking and closing device. Low speed operation from 100 rpm possible. Modern design. Simple operation is a special feature of this centrifuge. Operation with two knobs only. Time display in sec. or min. LCD-display of run-time, speed and RCF. Illuminated keys for start, lid and brake. Steel housing for optimal safety and stability. Produced according to national and international safety regulations (e.g. IEC 1010). No. 10105 (230 V / 50; 60 Hz) No. 10106 (120 V / 60 Hz)

Technical specifications

Power supply [V/Hz]	230 / 50; 60 alt. 120 / 60
Power consumption drive [W]	220
Maximum rotational speed [rpm]	5 650
Minimum rotational speed [rpm]	100
Maximum capacity [ml]	6 x 30
Interference suppression	EN 61326
Dimensions: Height x Width x Depth [mm]	245 x 240 x 320
Weight without accessories [kg]	13
Max. kinetic energy [Nm]	980
Noise level at max. speed (approx.) [dB (A)]	60
Max. acceleration rotor no. 12066 [s]	6
Min. deceleration rotor no. 12066 [s]	8

Rotors

Order. no.	Description	Max. rpm	Max. rcf
12066	Angle rotor 6 x 15 ml, for tubes ø17 x up to 120 mm e.g. tubes no. 15015, 15020, 15023, 15024, Monovettes and Falcontubes 15 ml no. 15115	5.650 1/min	3.030 x g
12067	Angle rotor 6 x 30 ml 25/31 x 65mm Sterilin no. 3008	5.650 1/min	3.034 x g

Accessories

Order no.	Description	Suitable for:
13070	Adapter for 1 tube approx. 5 ml, max. ø 13,5/17 x 70 - 82 mm, e.g. vacutainer	12066
13071	Adapter for 1 tube approx. 5 ml, max. ø 12,8 x 75 - 90 mm, e.g. No. 15060, hemolyse tubes; in 13020, 13035 max. 85 mm	12066
13072	Adapter for 1 tube 4,5 - 7 ml, max. ø 12,3 x 90 - 105 mm, e.g. No. 15007, 15027; in 13020, 13035 max. 100 mm	12066