The models LV 3/11 - LVT 15/11 are especially designed for ashing in
the laboratory. A special air intake and exhaust system allows air
exchange of more than 6 times per minute. Incoming air is preheated
to ensure a good temperature uniformity.
?•Tmax 1100 °C
•Heating from two sides by ceramic heating plates
•Ceramic heating plates with integral heating element which is
safeguarded against fumes and splashing, and easy to replace
•Highly durable, high-performance cured vacuum fibre module lining
•Housing made of sheets of textured stainless steel
•Dual shell housing for low external temperatures and stability
•Optional flap door (L) which can be used as work platform or lift
door (LT) with hot surface facing away from the operator
•Solid state relays provide for lownoise operation
•Air exchange of more than 6 times per minute
•Good temperature uniformity due to preheating of incoming air
Additional equipment
?•Over-temperature limit controller with manual reset for thermal
protection class 2 in accordance with EN 60519-2 as temperature
limiter to protect the oven and load
•Process control and documentation with Controltherm MV software
package
Technical Information
Model:
LV 3/11
LV 5/11
LV 9/11
LV 15/11
Tmax °C
1100
1100
1100
1100
Inner dimensions in mm (WxDxH)
160x140x100
200x170x130
230x240x170
230x340x170
Volume in l
3
5
9
15
Outer dimensions in mm (WxDxH)
380x370x750
440x470x850
480x550x900
480x650x900
Connected load kW
1.2
2.4
3.0
3.6
Electrical connection
single-phase
single-phase
single-phase
single-phase
Weight in kg
20
35
45
55
Minutes to Tmax²
120
120
120
120
¹Heating only between two phases
²If connected at 230 V 1/N/PE rsp. 400 V 3/N/PE
