Growth Chambers

Wolf supplies the LMS and the MMM Climacell range of growth chambers. Details on the LMS range are featured below or you can click the link for the MMM PDF download. Please call or use the quotation request form if you would like a quotation.

Click here to see the MMM Climacell Range

Click here to see the Binder Incubator Range

Cooled Incubator Model 410XAL
This LMS Model 410XAL Cooled Incubator is a reliable and accurate temperature controlled cabinet (-10°C to +50°C) which has been widely used in laboratories throughout the world.   This purpose built incubator, with many applications, has specially built in features, particularly controlled lighting, making it ideally suited for a wide range of functions including:-		B.O.D. Tests
		Seed germination & vernalisation
		Growth study of plants
		Insect culture
		Long-term stability study
		Controlled time-scales study

Model 410XAL (450 litres)
Construction Exterior - white stove enamelled mild steel Interior - white enamelled aluminium Insulation - foamed polyurethane for optimum results
Special Features Door Vents: two adjustable vents to allow for the exchange of air within the cabinet. Temperature Protection: Adjustable temperature safety cut-out with two independent high/low set points, giving both audible and visual alarms. Lighting: 15w fluorescent tubes mounted in pairs above four adjustable shelves, complete with 24 hour timer with 10 minutes resolution. Automatic de-frost

	Design
	Digital control with digital readout
	Fan assisted air circulation via premixing chamber
	Full P.I.D. heating control to ensure stable internal temperatures
	Pre-set overheat cabinet protection
	Electronics RF and TV suppressed
	Hermetically sealed refrigeration system - CFC free
	Refrigeration isolation switch
	Self-evaporating condensate drip-tray
	Automatic de-frost
	Variable over & under temperature alarm
	Doorlock
	Castors
	White plastic coated wire shelves - adjustable in 28mm increments
	Operation
	Controls easy to read and simple to use
	Temperature range: -10°C to +50°C (NOTE: with illumination on, range: +7°C to +50°C) with average variation of +/- 0.5°C and fluctuation of 0.1°C with average workload
	Temperature set by direct reading digital controller
	Indicator lamps for mains, heating, cooling and high temperature safety
	Interior illumination controlled by 24 hour or 7 day timer
	Automatic dual temperature control by (a) 24 hour timer with 10 minute settings (b) 7 day timer with 2 hour settings
	High/low temperature safety cut-out, with audible alarm
	Optional Extras
	Built-in chart recorder
	Access porthole
	Special evaporator for corrosive conditions

Higher Capacity Growth Chambers
The LMS Series Four Cooled Incubator is a reliable and accurate temperature controlled cabinet (-10°C to +50°C) which has proved its worth over many years in laboratories both in the UK and overseas.   The design of the purpose built incubator facilitates the addition of optional extras to provide greater flexibility for individual use, making it suitable for a wide range of applications including:-		The study of growth patterns of plants and insects
		B.O.D. Tests
		Seed germination & vernalisation
		Tissue culture
		Enzyme testing
		Serum studies
		Immunology
		Sample storage
		Product shelf life tests
Models 600 litre 1200 litre	Construction Exterior - stainless  steel Interior - stainless  steel Insulation - foamed polyurethane for optimum results

	600	1200

	Design
	Digital control with digital readout
	Fan assisted air circulation via premixing chamber
	Full P.I.D. heating control to ensure stable internal temperatures
	Pre-set overheat protection
	Electronics RF and TV suppressed
	Hermetically sealed refrigeration system
	Refrigeration isolation switch
	Self-evaporating condensate drip-tray
	Automatic de-frost
	Variable over-temp alarm
	Doorlock
	Operation
	Controls easy to read and simple to use
	Temperature range: -10°C to +50°C (excluding interior illumination and double glazed door) with average variation of +/- 0.5°C and fluctuation of 0.1°C with average workload
	Temperature set by direct reading digital controller
	Indicator lamps for mains, heating, cooling and high temperature safety
	Optional Extras
	Automatic dual temperature control by (a) 24 hour timer with 10 minute settings or (b) 7 day timer with 2 hour settings
	Interior fluorescent/u.v. lighting operated by 24 hour or 7 day timer
	Inner clear perspex door
	Built-in chart recorder
	High/low temperature safety cut-out, with audible alarm
	Access porthole
	Double glazed door (minimum 0°C)
	Castors
	Internal 13 amp socket
	Special evaporator for corrosive conditions